About Plain Bearings
More
Panel-Mount Oil-Embedded Sleeve Bearings
Unlike other sleeve bearings, these do not need to be fully inserted into a housing. Their unique shape creates a permanent, secure hold in thin panels. Bearings swivel to accommodate up to 5° of shaft misalignment. On startup, friction causes the bronze to release a thin layer of oil on the bearing’s surface. Not for use with plastic panels.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| Lg. | Spline OD | For Min. Sheet Metal Thick. | Dynamic Radial Load Capacity | Misalignment Capability | Lubrication | Lubricant | Temperature Range, °F | Each | |
840 Bronze Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 1/4" Shaft Dia. | |||||||||
| 0.4" | 0.55" | 0.04" | 200 lbs. @ 120 rpm | 5° | Lubricated | SAE 45 Oil | -20° to 200° | 0000000 | 00000 |
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 1/4" | 9/16" | 1 1/8" | 2 1/4" | 3/8" | 13/32" | 9/32" | 1 3/4" | 185 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 1/4" | 3/4" | 1 5/8" | 25/64" | 13/32" | 3/16" | 11/64" | 1 1/4" | 185 lbs. @ 120 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 00000 |