Filter by
System of Measurement
ID
Plain Bearing Type
For Load Direction
Material
Lubrication
Mounted Bearing Type
Shaft Type
Flange Thickness
DFARS Specialty Metals
REACH
RoHS
Maximum Temperature
Mounting Hole Center-to-Center
Minimum Temperature
Lubrication Method
Dynamic Radial Load Capacity @ Speed
About Ball and Roller Bearings
More
About Plain Bearings
More
Oil-Embedded Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
841 Bronze Bearings
| For Housing ID | Lg. | Dynamic Radial Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
For 15/16" Shaft Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 1 1/16" | 3/4" | 1,400 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 00000 |
| 1 1/16" | 1 1/4" | 2,300 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 00000000 | 0000 |
| 1 1/4" | 2" | 3,750 lbs. @ 60 rpm | Lubricated | SAE 30 Oil | 10° to 220° | 0000000 | 00000 |
Easy-Align Mounted Ball Bearings with Two-Bolt Flange
An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft. You only need to loosen the bolt instead of removing it to adjust. They’re self-aligning to compensate for shaft misalignment.
For technical drawings and 3-D models, click on a part number.
Overall | Mounting | Radial Load Cap., lbs. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Lg. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, ° F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | |||||||||||||||
Shaft Mount Type: Set Screw | |||||||||||||||
| 15/16" | 2 3/4" | 4 7/8" | 1 13/32" | 1/2" | 7/16" | 1 15/16" | 3 55/64" | 3,100 | 1,750 | 5,000 | 0° to 210° | Self Aligning | Lubricated | 0000000 | 000000 |