1.002" ID Bearings | McMaster-Carr

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings									Thin Washers			Thick Washers
	For Shaft Dia.	OD	Thk.	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F		Each	Thk.		Each	Thk.		Each
Steel



		1"	1 9/16"	5/64"	Steel	3,150	7,500	0 to 240	5909K36	00000	0.032"	5909K49	00000	0.126"	5909K63	00000

Oil-Embedded Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 5/16"	1 1/4"	2,500 lb. @ 60 rpm	Mineral Oil	10 to 220	6391K543	00000


	1"	1 5/16"	2 1/2"	5,000 lb. @ 60 rpm	Mineral Oil	10 to 220	6391K546	00000
	1"	1 5/16"	3"	6,000 lb. @ 60 rpm	Mineral Oil	10 to 220	6391K547	00000
	1"	1 3/8"	1"	2,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K451	00000
	1"	1 3/8"	1 1/4"	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K728	00000
	1"	1 3/8"	1 1/2"	3,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K452	00000
	1"	1 3/8"	2"	4,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K653	00000
	1"	1 3/8"	4"	8,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K21	000000


	High-Load 863 Iron Copper



			1"	1 1/4"	1/2"	1,100 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T203	0000


			1"	1 1/4"	3/4"	1,650 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T22	0000
			1"	1 1/4"	1"	2,200 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T23	0000
			1"	1 1/4"	1 1/4"	2,750 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T24	0000
			1"	1 1/4"	1 1/2"	3,300 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T204	0000
			1"	1 1/4"	2"	4,450 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T205	0000
			1"	1 1/4"	2 1/4"	5,000 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T206	00000
			1"	1 1/4"	2 1/2"	5,550 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T207	00000
			1"	1 1/4"	2 7/8"	6,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T208	00000
			1"	1 1/4"	3"	6,650 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T209	00000
			1"	1 1/4"	4"	8,900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T211	00000


			1"	1 3/8"	1"	2,200 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T212	0000
			1"	1 3/8"	1 1/2"	3,300 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T213	0000
			1"	1 3/8"	4"	8,900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T214	00000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia.	OD	Thk.	Washer Material		Each
1"	1 9/16"	0.032"	Steel	5909K49	00000
1"	1 9/16"	0.126"	Steel	5909K63	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 1/4"	3/4"	1 1/2"	1/8"	1,500 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K19	00000


	1"	1 1/4"	1"	1 1/2"	1/8"	2,000 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K21	0000
	1"	1 1/4"	1 1/4"	1 1/2"	1/8"	2,500 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K384	0000
	1"	1 1/4"	1 1/2"	1 1/2"	1/8"	3,000 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K385	00000
	1"	1 3/8"	3/4"	1 5/8"	3/16"	1,500 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K386	00000
	1"	1 3/8"	1"	1 5/8"	3/16"	2,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K387	00000
	1"	1 3/8"	1 1/2"	1 5/8"	3/16"	3,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K388	00000
	1"	1 3/8"	1 3/4"	1 5/8"	3/16"	3,500 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K389	00000
	1"	1 3/8"	2"	1 5/8"	3/16"	4,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	PTFE	-140 to 460	1677K391	00000

Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 3/8"	3/4"	1 5/8"	3/16"	1,500 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K588	000000


	1"	1 3/8"	1"	1 5/8"	3/16"	2,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K589	00000
	1"	1 3/8"	1 1/2"	1 5/8"	3/16"	3,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K591	00000
	1"	1 3/8"	2"	1 5/8"	3/16"	4,000 lb. @ 60 rpm	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K592	00000


	High-Load 863 Iron Copper



			1"	1 1/4"	3/4"	1 1/2"	3/16"	1,650 lb. @ 60 rpm	1,450 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T708	0000


			1"	1 1/4"	1"	1 1/2"	3/16"	2,200 lb. @ 60 rpm	1,450 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T709	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 1/4"	1/2"	990 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K367	00000


	1"	1 1/4"	3/4"	1,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K368	0000
	1"	1 1/4"	1"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K369	0000
	1"	1 1/4"	1 1/4"	2,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K371	0000
	1"	1 1/4"	1 1/2"	3,000 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K27	0000
	1"	1 1/4"	1 3/4"	3,450 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K372	0000
	1"	1 1/4"	2"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K373	0000
	1"	1 1/4"	2 1/2"	4,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K374	00000
	1"	1 1/4"	3"	1,950 lb. @ 60 rpm	Synthetic Oil	PTFE	-40 to 460	1688K375	00000

Mil. Spec. Oil-Embedded Sleeve Bearings

These bearings are manufactured and tested to strict U.S. military standards for material and construction. All are made from porous metal and saturated with oil to reduce maintenance and downtime. Although these bearings will work in most conditions, oil may drip away if temperatures get too high.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	1"	1 1/8"	1"	1,600 lb. @ 60 rpm	Synthetic Oil	-65 to 300	ASTM B438, MIL-B-5687, MS17795-134	7639N25	00000


	1"	1 1/4"	1"	1,600 lb. @ 60 rpm	Synthetic Oil	-65 to 300	ASTM B438, MIL-B-5687, MS17795-141	7639N26	0000

Mil. Spec. Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	1"	1 1/4"	3/4"	1 1/2"	1/8"	1,200 lb. @ 60 rpm	1,550 lb. @ 60 rpm	Synthetic Oil	-65 to 300	ASTM B438, MIL-B-5687, MS17796-205	7634N21	00000

High-Temperature Graphite-Lubricated Sleeve Bearings

Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 1/8"	1"	1,600 lb. @ 60 rpm	-50 to 700	9368T81	00000


	1"	1 1/4"	1/2"	800 lb. @ 60 rpm	-50 to 700	9368T82	0000
	1"	1 1/4"	3/4"	1,200 lb. @ 60 rpm	-50 to 700	9368T83	0000
	1"	1 1/4"	1"	1,600 lb. @ 60 rpm	-50 to 700	9368T34	0000
	1"	1 1/4"	1 1/4"	2,000 lb. @ 60 rpm	-50 to 700	9368T84	0000
	1"	1 1/4"	1 1/2"	2,400 lb. @ 60 rpm	-50 to 700	9368T85	00000
	1"	1 1/4"	2"	3,200 lb. @ 60 rpm	-50 to 700	9368T86	00000
	1"	1 1/4"	2 1/4"	3,600 lb. @ 60 rpm	-50 to 700	9368T205	00000
	1"	1 1/4"	2 1/2"	4,000 lb. @ 60 rpm	-50 to 700	9368T206	00000
	1"	1 1/4"	3"	4,800 lb. @ 60 rpm	-50 to 700	9368T207	00000
	1"	1 3/8"	1"	1,600 lb. @ 60 rpm	-50 to 700	9368T208	00000


	1"	1 3/8"	1 1/2"	2,400 lb. @ 60 rpm	-50 to 700	9368T209	00000
	1"	1 1/2"	2"	3,200 lb. @ 60 rpm	-50 to 700	9368T211	00000
	1"	1 1/2"	3"	4,800 lb. @ 60 rpm	-50 to 700	9368T212	00000

High-Temperature Graphite-Lubricated Flanged Sleeve Bearings

Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. High-Temperature Graphite-Lubricated Flanged Sleeve Bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 1/4"	3/4"	1 1/2"	1/8"	1,200 lb. @ 60 rpm	1,550 lb. @ 60 rpm	-50 to 700	9440T34	00000


	1"	1 1/4"	1"	1 1/2"	1/8"	1,600 lb. @ 60 rpm	1,550 lb. @ 60 rpm	-50 to 700	9440T35	0000
	1"	1 1/4"	1 1/4"	1 1/2"	1/8"	2,000 lb. @ 60 rpm	1,550 lb. @ 60 rpm	-50 to 700	9440T47	0000
	1"	1 1/4"	1 1/2"	1 1/2"	1/8"	2,400 lb. @ 60 rpm	1,550 lb. @ 60 rpm	-50 to 700	9440T48	00000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	1"	1 1/4"	3/4"	1 1/2"	1/8"	1,500 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K31	00000


	1"	1 1/4"	1"	1 1/2"	1/8"	2,000 lb. @ 60 rpm	1,950 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K32	0000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	1"	1 1/4"	1 1/4"	2,500 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K48	000000


	High-Load 863 Iron Copper



			1"	1 1/4"	1 1/4"	2,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	6952K68	0000

Dry-Running Flanged Sleeve Bearings

Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.

MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon, which will swell and weaken when exposed to moisture.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F		Each
MDS-Filled Nylon



	1"	1 1/4"	1"	1 7/16"	1/16"	190 lb. @ 60 rpm	110 lb. @ 60 rpm	Black	-40 to 170	6294K241	000000


	1"	1 1/4"	1"	1 7/16"	1/8"	190 lb. @ 60 rpm	110 lb. @ 60 rpm	Black	-40 to 170	6294K242	00000
	1"	1 1/4"	1 1/2"	1 1/2"	1/8"	280 lb. @ 60 rpm	125 lb. @ 60 rpm	Black	-40 to 170	6294K243	00000

Dry-Running Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

MDS-Filled Nylon—A step up from standard nylon bearings. Upgraded with fine particles of molybdenum disulfide (MDS), these bearings have extra lubricity and wear resistance. However, they’re still nylon and will swell and weaken when exposed to moisture.

								Each
	For Shaft Dia.	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F		1-24	25-99	100-Up
MDS-Filled Nylon



		1"	1 1/8"	1"	190 lb. @ 60 rpm	Black	-40 to 170	6294K105	000000	00000	00000