1.007" ID Bearings | McMaster-Carr

Made of naturally slippery plastic so you’ll never have to add lubricant. They’re ideal for clean environments where you need to prevent oil drips or graphite flakes. Compared to metal bearings, they are lighter and will never rust.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE—Woven polyester resin reinforces these PTFE bearings to support loads and speeds comparable to metal bearings. Similar to other PTFE options, they are unaffected by the harsh fluids that other plastics can't handle, including all strong acids and bases.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F		Each
High-Load Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE



	1"	1 1/4"	3/4"	1 1/2"	1/8"	1,150 lb. @ 60 rpm	1,000 lb. @ 60 rpm	Blue	-40 to 150	1523N37	000000


	1"	1 1/4"	1"	1 1/2"	1/8"	1,550 lb. @ 60 rpm	1,000 lb. @ 60 rpm	Blue	-40 to 150	1523N13	00000
	1"	1 1/4"	1 1/4"	1 1/2"	1/8"	1,950 lb. @ 60 rpm	1,000 lb. @ 60 rpm	Blue	-40 to 150	1523N38	00000
	1"	1 1/4"	1 1/2"	1 1/2"	1/8"	2,350 lb. @ 60 rpm	1,000 lb. @ 60 rpm	Blue	-40 to 150	1523N39	00000

Dry-Running Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

								Each
	For Shaft Dia.	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F		1-24	25-99	100-Up
High-Load Ultra-Chemical-Resistant Polyester Fabric-Reinforced PTFE



		1"	1 1/4"	1"	1,550 lb. @ 60 rpm	Blue	-40 to 150	1521N15	000000	000000	000000

Oil-Embedded Thrust Bearings

Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 3/4"	1/16"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K573	00000


	1"	1 3/4"	1/8"	2,900 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K574	0000