1.0105" ID Bearings | McMaster-Carr

Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they run at slower speeds. The increased iron content also makes them appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	1 5/8"	1/16"	2,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K605	00000


	1"	1 5/8"	1/8"	2,450 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K606	0000
	1"	1 5/8"	1/4"	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K572	0000
	1"	2 7/8"	1/8"	6,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K415	00000


	High-Load 863 Iron Copper



			1"	2 7/8"	1/8"	4,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2879T17	0000