1.011" ID Bearings | McMaster-Carr

Our simplest-to-use thrust bearings, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them. While they run in most conditions, oil may drip away if temperatures climb too high. For extremely hot environments, consider graphite-lubricated bearings. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1"	2"	1/8"	3,750 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K524	00000


	1"	2"	3/16"	3,750 lb. @ 60 rpm	Synthetic Oil	-35 to 300	5906K555	0000

Oil-Embedded Thrust Bearings for Food and Beverage

Infused with food-grade oil, these bearings are safe for incidental contact with food. The oil is odorless, colorless, and tasteless, so they're common on food production and packaging lines. You can install and forget them since their porous surface releases oil over time. All are fabricated, lubricated, and inspected in the U.S.

If you need a bearing rated for direct contact with food, consider dry-running thrust bearings for food and beverage.

841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.

	OD	Thk.	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	1"	2"	1/8"	3,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, NSF Registered H1	5429T3	00000