1.44" ID Bearings | McMaster-Carr

Good for bulky setups, the tall design doubles the clearance between the shaft and the mounting surface. The balls roll nearly friction-free within a sturdy housing to support smooth rotation.

Lubricate regularly to keep your bearings in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Powder-Coated Cast Iron Housing—A rugged iron base coated in thick powder that protects against water, mild detergents, and oil. However, if the coating is scratched or chipped, the underlying iron may rust.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

			Overall
	For Shaft Dia.	Ctr. Ht.	Lg.	Wd.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1 7/16"	3 47/64"	6 9/16"	2 3/8"	5,750	3,500	Steel	Sealed	2°	0000000	000000

Oil-Embedded Sleeve Bearings

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	1 7/16"	1 5/8"	2"	5,750 lb. @ 30 rpm	Synthetic Oil	-35 to 300	00000000	000000

Easy-Adjust Mounted Ball Bearings with Two-Bolt Flange

Change the position of your bearing without having to remove your shaft. Just loosen the bolt in the elongated mounting hole for quick adjustments. The housing mounts in place with a two-bolt flange, the most common type of flanged bearing. Inside, the balls roll nearly friction-free to support smooth rotation.

Lubricate regularly to keep your bearings in tip-top shape. These bearings come packed with grease and sealed to block out dust and contaminants.

Set Screw—Turn the screw to lock your shaft in place. A simple, reliable choice, set screws grip tightly, but they can mar shaft surfaces.

Misalignment Capability—Bearings compensate for as much shaft misalignment as the degree listed. This extends the life of the bearing and protects against wear if shafts are slightly askew.

		Overall
	For Shaft Dia.	Lg.	Wd.	Flange Thk.	Dynamic Radial Load Cap., lb.	Max. Rotation Speed, rpm	Bearing Material	Bearing Seal Type	Misalignment Capability		Each
Powder-Coated Cast Iron Housing







				Set Screw

				1 7/16"	6 3/32"	1 23/32"	9/16"	5,750	3,500	Steel	Sealed	2°	0000000	000000