1.508mm ID Bearings | McMaster-Carr

Filter by

System of Measurement

Shaft Diameter

Plain Bearing Type

For Housing ID

Length

For Load Direction

Shaft Mount Type

Lubrication

Lubrication Method

Bearing Type

Material

Shaft Type

Dynamic Radial Load Capacity @ Speed

Flange OD

REACH Compliance

Minimum Temperature

Maximum Temperature

Lubricant

RoHS Compliance

Flange Thickness

DFARS Compliance

Forward

How can we improve?

3 Products

About Plain Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They are also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings

For 1.5 mm Shaft Dia.
For Housing ID, mm	Lg., mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
5	3	13 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	000000

High-Load Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With extra iron and filled with oil containing slippery PTFE, these bearings support heavy loads that frequently start and stop along shafts. Startup friction causes a thin layer of oil to release onto the surface. Their high iron content also means they resist failing if their load suddenly and drastically increases, but they won’t run as fast as standard bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

863 Iron-Copper
For Housing ID, mm	Length, mm	Dynamic Radial Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 1.5 mm Shaft Dia.
5	3	27 lbs. @ 120 rpm	Lubricated	SAE 20 Oil with PTFE	-60° to 300°	00000000	000000

Oil-Embedded Flanged Sleeve Bearings

Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.

Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.

For technical drawings and 3-D models, click on a part number.

Metric 841 Bronze Bearings
For Housing ID	Lg.	Flange OD	Flange Thick.	Dynamic Radial Load Capacity	Dynamic Thrust Load Capacity	Lubrication	Lubricant	Temperature Range, °F		Each
For 1.5mm Shaft Dia.
5mm	3mm	6.5mm	1.8mm	13 lbs. @ 120 rpm	95 lbs. @ 120 rpm	Lubricated	SAE 30 Oil	-35° to 300°	0000000	000000