10.025mm ID Bearings | McMaster-Carr

A gap running along the length of these bearings allows you to quickly squeeze them into a housing—no tools required. Made of naturally slippery plastic, there’s no need to add messy oil that could drip and attract dust.

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Nylon—The most popular choice, nylon is wear resistant yet economical. Keep in mind, though, that it will swell and weaken when exposed to moisture.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F		Each
Nylon



	10	11.6	10.8	15	0.8	43 lb. @ 40 rpm	28 lb. @ 40 rpm	White	0 to 200	0000000	00000

Needle-Roller Thrust Bearings


Bearings	Washers

Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.

A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.

Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.

	Thrust Bearings										Thin Washers			Thick Washers
	For Shaft Dia., mm	OD, mm	Thk., mm	Cage Material	Dynamic Thrust Load Cap., lb.	Max. Rotation Speed, rpm	Temp. Range, ° F	Specs. Met		Each	Thk., mm		Each	Thk., mm		Each
Steel



		10	24	2	Steel	2,050	17,000	0 to 240	DIN 5405-2	0000000	00000	1	0000000	00000	2.75	0000000	000000

Dry-Running Flanged Sleeve Bearings for Food and Beverage

Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.

Moisture-Resistant Plastic Blend—Similar to UHMW, these bearings will keep their shape after washdowns but won’t hold up to steam cleaning. They're bright blue so they are easy to spot if they fall into your production line.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Moisture-Resistant Plastic Blend



	10	12	7	18	1	15 lb. @ 120 rpm	39 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	00000


	10	12	9	18	1	20 lb. @ 120 rpm	39 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000
	10	12	10	18	1	22 lb. @ 120 rpm	39 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000
	10	12	12	18	1	26 lb. @ 120 rpm	39 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000
	10	12	17	18	1	38 lb. @ 120 rpm	39 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1520, FDA Compliant 21 CFR 177.1550, FDA Compliant 21 CFR 178.3297	000000000	0000

Washers for Needle-Roller Thrust Bearings

Adapt needle-roller thrust bearings to use on unhardened, unground surfaces.

For Shaft Dia., mm	OD, mm	Thk., mm	Washer Material	Specs. Met		Each
10	24	1	Steel	DIN 5405-3, ISO 303	0000000	00000
10	24	2.75	Steel	—	0000000	00000

Dry-Running Sleeve Bearings for Food and Beverage

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Moisture-Resistant Plastic Blend



	10	12	8	85 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	00000


	10	12	10	105 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	0000
	10	12	15	160 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	0000
	10	12	20	215 lb. @ 120 rpm	Blue	-50 to 190	FDA Compliant 21 CFR 177.1550	00000000	0000