15.01mm ID Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	15	19	10	460 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K746	00000


	15	19	15	690 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K172	0000
	15	19	16	740 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K27	0000
	15	19	20	930 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K28	0000
	15	19	25	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K173	0000
	15	19	30	1,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K174	0000
	15	20	10	460 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K175	0000
	15	20	15	690 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K176	0000
	15	20	20	930 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K177	0000
	15	20	25	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K178	0000
	15	20	30	1,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K179	0000


	15	21	15	690 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K185	0000
	15	21	16	740 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K29	0000
	15	21	20	930 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K31	0000
	15	21	25	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K186	0000
	15	22	15	690 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K181	0000
	15	22	20	930 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K182	0000
	15	22	25	1,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K183	0000
	15	22	30	1,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6658K184	0000


	High-Load 863 Iron Copper



			15	19	10	870 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T353	0000


			15	19	20	1,750 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T355	0000
			15	21	16	1,400 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2868T356	0000

Oil-Embedded Flanged Sleeve Bearings

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	15	19	12	23	2	550 lb. @ 60 rpm	740 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K685	00000


	15	19	16	23	2	740 lb. @ 60 rpm	740 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K27	0000
	15	19	20	23	2	930 lb. @ 60 rpm	740 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K28	0000
	15	21	15	27	3	690 lb. @ 60 rpm	1,200 lb. @ 60 rpm	Mineral Oil	10 to 220	6659K125	0000
	15	21	16	27	3	740 lb. @ 60 rpm	1,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K29	0000
	15	21	20	27	3	930 lb. @ 60 rpm	1,200 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6659K31	0000
	15	21	25	27	3	1,150 lb. @ 60 rpm	1,200 lb. @ 60 rpm	Mineral Oil	10 to 220	6659K126	0000


	High-Load 863 Iron Copper



			15	19	12	23	2	1,050 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T782	0000


			15	19	16	23	2	1,400 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T783	0000
			15	19	20	23	2	1,750 lb. @ 60 rpm	900 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T784	0000
			15	21	20	27	3	1,750 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	-15 to 300	2938T786	0000

Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	15	19	12	23	2	550 lb. @ 60 rpm	730 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K249	00000


	15	19	20	23	2	920 lb. @ 60 rpm	730 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1677K252	0000


	High-Load 863 Iron Copper



			15	19	12	23	2	1,050 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N148	0000


			15	19	16	23	2	1,400 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N149	0000
			15	19	20	23	2	1,750 lb. @ 60 rpm	910 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N151	0000
			15	21	16	27	3	1,400 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N152	0000
			15	21	20	27	3	1,750 lb. @ 60 rpm	1,250 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7119N153	0000

Ultra-Low-Friction Oil-Embedded Sleeve Bearings

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Lubricant Additive	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	15	19	16	740 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K164	00000


	15	19	20	920 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	ASTM B438	1688K165	0000


	High-Load 863 Iron Copper



			15	19	16	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N164	0000


			15	19	20	1,750 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N165	0000
			15	21	16	1,400 lb. @ 60 rpm	Synthetic Oil	PTFE	-60 to 300	—	7460N166	0000

Oil-Embedded Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	15	19	10	460 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K163	00000


	15	21	16	740 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	7095K166	00000


	High-Load 863 Iron Copper



			15	19	10	870 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N163	0000


			15	19	16	1,400 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N164	0000
			15	19	20	1,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N165	0000
			15	21	20	1,750 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570, ASTM B439	7407N167	00000

Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID, mm	Lg., mm	Flange OD, mm	Flange Thk., mm	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F	Specs. Met		Each
841 Bearing Bronze



	15	19	12	23	2	550 lb. @ 60 rpm	730 lb. @ 60 rpm	Synthetic Oil	-75 to 300	FDA Compliant 21 CFR 178.3570	3746K79	00000