Filter by
Mounted Bearing Type
System of Measurement
ID
DFARS Specialty Metals
Plain Bearing Type
Shaft Mount Type
Bearing Material
Alignment Style
Bearing Type
Lubrication Method
Dynamic Radial Load Capacity @ Speed
Lubrication
Maximum Temperature
REACH
RoHS
Export Control Classification Number (ECCN)
Lubricant
Minimum Temperature
Misalignment Capability
Housing Material
Oil-Embedded Mounted Sleeve Bearings
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. They are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Center Ht. | Ht. | Lg. | Wd. | Bearing Wd. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 18mm | 19mm | 39.5mm | 82.5mm | 22.5mm | 22.5mm | 8.5mm | 63.5mm | 1,250 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |
Oil-Embedded Mounted Sleeve Bearings with Two-Bolt Flange
Startup friction causes these porous bronze bearings to release a thin layer of oil on the bearing’s surface. Bearings are self-aligning to compensate for shaft misalignment.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
Overall | Mounting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Bearing Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic Radial Load Cap. | Temp. Range, °F | Alignment Style | Lubrication | Each | |
840 Bearing Bronze Bearings with Aluminum Housing | |||||||||||||
| 18mm | 41.5mm | 82.5mm | 22.5mm | 21.5mm | 6.5mm | 10.5mm | 63.5mm | 1,250 lbs. @ 60 rpm | -20° to 200° | Self Aligning | Lubricated | 0000000 | 000000 |