Filter by
System of Measurement
Mounted Bearing Type
ID
Mounting Hole Center-to-Center
Bearing Type
Flange Thickness
Shaft Mount Type
For Load Direction
Bearing Material
Mounting Hole Diameter
Housing Material
Misalignment Capability
Minimum Temperature
Maximum Temperature
Bearing Seal Type
Alignment Style
Shaft Type
Static Radial Load Capacity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
About Ball and Roller Bearings
More
Mounted Ball Bearings with Four-Bolt Flange
Bearings are self-aligning to compensate for shaft misalignment. Seals block out dust and contaminants.
Eccentric lock bearings are quick to install—twist them in one direction to tighten and the opposite to loosen. They’re better than set screw bearings for high speed applications, but they only work with shafts that rotate in one direction.
For technical drawings and 3-D models, click on a part number.
Bearings
Eccentric Lock Mount
Overall | Mounting | Radial Load Cap., lbs. | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Shaft Dia. | Ht. | Lg. | Wd. | Flange Thick. | Hole Dia. | Hole Ctr.-to-Ctr. | Dynamic | Static | Max. Speed, rpm | Temp. Range, °F | Alignment Style | Lubrication | Each | |
Sealed Steel Bearings with Cast Iron Housing | ||||||||||||||
Shaft Mount Type: Eccentric Lock | ||||||||||||||
| 50mm | 143mm | 143mm | 60.7mm | 15mm | 18mm | 111mm | 7,850 | 5,200 | 4,000 | -20° to 210° | Self Aligning | Lubricated | 0000000 | 0000000 |