1.127" OD Bearings | McMaster-Carr

Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

Extreme-Load Heat-Treated Iron Copper—Our strongest oil-embedded sleeve bearings. They’re heat treated to form a uniform internal grain that makes them stronger than 863 iron copper. As a result, they’re often used to support extreme loads in earth-moving equipment and railroad applications. The increased iron content makes these bearings appear silver.

Mineral Oil Base—Mineral oil consistently lubricates at most temperatures but doesn’t last as long as synthetic oil.

Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	3/4"	1 1/8"	3/4"	1,100 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K643	00000


	3/4"	1 1/8"	1"	1,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K869	0000
	3/4"	1 1/8"	1 1/4"	1,850 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K868	0000
	3/4"	1 1/8"	1 1/2"	2,250 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K449	00000
	3/4"	1 1/8"	1 3/4"	2,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K867	00000
	3/4"	1 1/8"	3"	4,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K14	00000
	7/8"	1 1/8"	3/4"	1,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K271	0000
	7/8"	1 1/8"	7/8"	1,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K955	0000
	7/8"	1 1/8"	1"	1,750 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K273	0000
	7/8"	1 1/8"	1 1/8"	1,950 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K951	00000
	7/8"	1 1/8"	1 1/4"	2,150 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K275	0000


	7/8"	1 1/8"	1 3/8"	2,400 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K956	0000
	7/8"	1 1/8"	1 1/2"	2,600 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K954	00000
	7/8"	1 1/8"	1 3/4"	3,050 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K953	00000
	7/8"	1 1/8"	2"	3,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K421	00000
	7/8"	1 1/8"	2 1/2"	4,350 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K952	00000
	7/8"	1 1/8"	3"	5,250 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K17	00000
	1"	1 1/8"	1/2"	1,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K422	0000
	1"	1 1/8"	3/4"	1,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K723	0000
	1"	1 1/8"	1"	2,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K423	0000
	1"	1 1/8"	1 1/4"	2,500 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K722	0000


	1"	1 1/8"	1 1/2"	3,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K649	0000
	1"	1 1/8"	4"	8,000 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6391K18	000000


	Extreme-Load Heat-Treated Iron Copper



			3/4"	1 1/8"	3/4"	3,550 lb. @ 60 rpm	Mineral Oil	10 to 350	3741K13	00000


			7/8"	1 1/8"	1 1/2"	7,150 lb. @ 60 rpm	Mineral Oil	10 to 350	3741K16	00000
			1"	1 1/8"	3/4"	3,550 lb. @ 60 rpm	Mineral Oil	10 to 350	3741K18	00000
			1"	1 1/8"	1 1/2"	7,150 lb. @ 60 rpm	Mineral Oil	10 to 350	3741K19	00000

Sleeve Bearings

These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load 932 Bearing Bronze—These bearings are strong enough for sudden starts and stops, plus they resist wear and tear. They are cast from an alloy of leaded tin bronze for uniform rigidity and strength. Also known as 660 leaded bronze bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	5/8"	1 1/8"	1 1/2"	3,750 lb. @ 60 rpm	-350 to 450	6381K161	00000


	3/4"	1 1/8"	1 1/2"	4,500 lb. @ 60 rpm	-350 to 450	6381K201	0000
	3/4"	1 1/8"	3"	9,000 lb. @ 60 rpm	-350 to 450	6381K14	00000
	7/8"	1 1/8"	3/4"	2,600 lb. @ 60 rpm	-350 to 450	6381K558	0000
	7/8"	1 1/8"	1"	3,500 lb. @ 60 rpm	-350 to 450	6381K559	0000
	7/8"	1 1/8"	1 1/4"	4,350 lb. @ 60 rpm	-350 to 450	6381K56	0000
	7/8"	1 1/8"	2"	7,000 lb. @ 60 rpm	-350 to 450	6381K561	0000
	7/8"	1 1/8"	3"	10,500 lb. @ 60 rpm	-350 to 450	6381K17	00000
	1"	1 1/8"	1/2"	2,000 lb. @ 60 rpm	-350 to 450	6381K562	0000
	1"	1 1/8"	1"	4,000 lb. @ 60 rpm	-350 to 450	6381K563	0000
	1"	1 1/8"	4"	16,000 lb. @ 60 rpm	-350 to 450	6381K18	00000

Flanged Sleeve Bearings

Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	7/8"	1 1/8"	3/4"	1 1/2"	1/8"	2,600 lb. @ 60 rpm	3,700 lb. @ 60 rpm	-350 to 450	7815K52	00000


	7/8"	1 1/8"	1"	1 1/2"	1/8"	3,500 lb. @ 60 rpm	3,700 lb. @ 60 rpm	-350 to 450	7815K53	0000
	7/8"	1 1/8"	1 1/4"	1 1/2"	1/8"	4,350 lb. @ 60 rpm	3,700 lb. @ 60 rpm	-350 to 450	7815K54	00000

Oil-Embedded Flanged Sleeve Bearings

841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.

	For Housing ID	Lg.	Flange OD	Flange Thk.	Dynamic Radial Load Cap. @ Speed	Dynamic Thrust Load Cap. @ Speed	Base Oil	Temp. Range, ° F		Each
841 Bearing Bronze



	7/8"	1 1/8"	3/4"	1 1/2"	1/8"	1,300 lb. @ 60 rpm	2,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K479	00000


	7/8"	1 1/8"	1"	1 1/2"	1/8"	1,750 lb. @ 60 rpm	2,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K435	0000
	7/8"	1 1/8"	1 1/4"	1 1/2"	1/8"	2,150 lb. @ 60 rpm	2,300 lb. @ 60 rpm	Synthetic Oil	-35 to 300	6338K481	0000

Grooved Sleeve Bearings

A figure-8-shaped groove provides a flow path for lubricant and distributes it evenly inside the bearing’s surface. A refill hole on the outside lets you inject your lubricant straight into the groove. These bearings don’t come with a lubricant, so you can select the oil that meets the needs of your application. You’ll need to refill the oil, so make sure the bearing is located where you can access it. All are fabricated and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

High-Load Chemical-Resistant 954 Bearing Bronze—The strongest of our bronze bearings. The addition of iron and aluminum makes them exceptionally strong and resistant to chemicals. They’re often used in the most demanding environments, such as salt mines. Also known as aluminum bronze.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	5/8"	1 1/8"	1 1/2"	3,250 lb. @ 60 rpm	-350 to 450	7965K19	000000


	3/4"	1 1/8"	1 1/2"	3,900 lb. @ 60 rpm	-350 to 450	7965K25	00000


	High-Load Chemical-Resistant 954 Bearing Bronze



			1"	1 1/8"	1"	3,900 lb. @ 60 rpm	-350 to 500	2924T56	00000

High-Temperature Graphite-Lubricated Sleeve Bearings

Made of a graphite and metal alloy, these bearings stay slippery at high temperatures where oil burns off and other bearings fail. With no need for refills, they require little to no maintenance. You’ll find them in pumps, propellers, and mixers that spin near steam or inside ovens. However, graphite may eventually flake off, dropping flecks and leaving smudges. If you need a spic-and-span space, consider dry-running bearings made of slippery plastic instead. All are fabricated, lubricated, and inspected in the U.S.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Temp. Range, ° F		Each
High-Load 932 Bearing Bronze



	7/8"	1 1/8"	1 1/2"	4,550 lb. @ 60 rpm	-350 to 450	6405K406	000000

Dry-Running Sleeve Bearings for Food and Beverage

Made of plastics permitted by the US FDA for contact with food, these bearings won’t release harmful, smelly, and distasteful impurities into your food or beverage production line. These self-lubricating plastics eliminate the need for oil, resulting in less maintenance and improved hygiene. You’ll find them inside food-processing equipment such as mixers, conveyors, and fillers.

With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.

Ultra-Low-Friction Rulon 641—Get effortless motion with strength surpassing UHMW polyethylene. Rulon 641 bearings can also operate from cryogenic to oven-like temperatures.

	For Housing ID	Lg.	Dynamic Radial Load Cap. @ Speed	Color	Temp. Range, ° F	Specs. Met		Each
Ultra-Low-Friction Rulon 641



	7/8"	1 1/8"	1"	630 lb. @ 60 rpm	White	-400 to 550	FDA Compliant 21 CFR 177.1550, USP Class VI	6371K38	000000