About Plain Bearings
More
Ultra-Low-Friction Dry-Running Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings handle higher operating temperatures than PTFE or thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Dynamic Radial Load Capacity | Color | Temperature Range, °F | Each | |
Metric Rulon J Plastic Bearings | ||||||
---|---|---|---|---|---|---|
For 10mm Shaft Dia. | ||||||
14mm | 10mm | 90 lbs. @ 120 rpm | Gold | -400° to 550° | 00000000 | 000000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Rulon J bearings stand up to higher temperatures than PTFE and thermoplastic-blend bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Rulon J Plastic Bearings | |||||||||
---|---|---|---|---|---|---|---|---|---|
For 10 mm Shaft Dia. | |||||||||
14mm | 15mm | 18mm | 2mm | 140 lbs. @ 120 rpm | 90 lbs. @ 120 rpm | Gold | -400° to 500° | 00000000 | 000000 |
Multipurpose Flanged Sleeve Bearings
These bronze bearings are strong, wear resistant, and excellent at handling shock loads. They’re sometimes called 660 leaded bronze bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Temperature Range, °F | PV Max. | Each | |
Metric 932 Bearing Bronze Bearings | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
For 9mm Shaft Dia. | ||||||||||
14mm | 6mm | 19mm | 2.5mm | 330 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 00000 |
14mm | 10mm | 19mm | 2.5mm | 550 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | 75,000 | 000000 | 0000 |
14mm | 14mm | 19mm | 2.5mm | 780 lbs. @ 120 rpm | 1,050 lbs. @ 120 rpm | Required | -350° to 450° | __ | 00000000 | 0000 |