Filter by
System of Measurement
OD
For Load Direction
Bearing Seal Type
Thread Size
Maximum Temperature
Maximum Rotation Speed
Static Thrust Load Capacity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Specifications Met
Material
Performance
Washer Material
Roller Bearing Type
Face Style
Bearing Type
Nut Type
Roller Material
Needle-Roller Thrust Bearings
 |  |
Bearings | Washers |
Small but mighty, our thinnest rolling thrust bearings slot into tight spaces and spin at whirring speeds. Their long, slender rollers support thrust loads and reduce friction in everything from machine tool spindles to gearboxes.
A cage holds the rollers in place. You can install these bearings without washers between hardened, ground surfaces for the thinnest profile. If you’re working with unhardened, unground surfaces, you’ll need two washers for the rollers to run on. This three-piece design is easy to lubricate, but the oil will attract dust and grime since it’s exposed.
Steel—Strong and wear resistant. However, these bearings are best for dry environments since moisture will cause them to rust.
Washers for Needle-Roller Thrust Bearings
|
For Shaft Dia., mm | OD, mm | Thk., mm | Washer Material | Specs. Met | Each | ||
|---|---|---|---|---|---|---|---|
| 110 | 145 | 1 | Steel | DIN 5405-3, ISO 303 | 00000000 | 000000 |
Bearing Nuts
 |
Carbon Steel Chamfered Face |
Often paired with spring lock washers to strengthen their hold, these bearing nuts—also known as shaft nuts—keep vibration from shifting bearings, bushings, pulleys, and gears on your threaded shaft or spindle. They have slotted sides, so you can tighten and loosen them with a spanner wrench or spanner socket.
Carbon Steel—Carbon steel bearing nuts are strong and resist wear.
Chamfered Face—Chamfered-face bearing nuts weigh less and produce less heat than stepped-face nuts.
ISO 2982— Some chamfered-face bearing nuts meet ISO 2982 (formerly DIN 981), an international standard for bearing locknut dimensions. Their sizes correspond to SKF KM series. Use them with DIN 5406 spring lock washers.
Thread Spacing—When choosing your thread spacing, consider the precision of your application. The finer the threads, the more control you have when making adjustments.
