McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    OD
    Attribute Image
    Plain Bearing Type
    For Housing ID
    Attribute Image
    Shaft Mount Type
    Flange OD
    Attribute Image
    Bearing Type
    Lubrication
    Shaft Type
    Flange Thickness
    Maximum Temperature
    Minimum Temperature
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    50 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    152215690 lb. @ 60 rpmSynthetic Oil-35 to 3006658K18100000
    152220930 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1820000
    1522251,150 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1830000
    1522301,350 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1840000
    162212590 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1910000
    162216790 lb. @ 60 rpmSynthetic Oil-35 to 3006658K340000
    162220990 lb. @ 60 rpmSynthetic Oil-35 to 3006658K350000
    1622251,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1920000
    1622301,450 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1930000
    1622351,700 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1940000
    172215790 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1950000
    1722201,050 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1960000
    1722251,300 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1970000
    1822181,000 lb. @ 60 rpmSynthetic Oil-35 to 3006658K360000
    1822221,200 lb. @ 60 rpmSynthetic Oil-35 to 3006658K370000
    1822281,550 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1980000
    1822301,650 lb. @ 60 rpmSynthetic Oil-35 to 3006658K1990000
     
    High-Load 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3620000
    1622201,750 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3630000
    1822181,550 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3640000
    1822221,900 lb. @ 60 rpmSynthetic Oil-15 to 3002868T3650000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 3006659K3400000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-35 to 3006659K350000
    182212262660 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 3006659K6870000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 3006659K360000
    1822222621,200 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-35 to 3006659K370000
     
    High-Load 863 Iron Copper
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 3002938T790000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7910000
    1822122621,050 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7920000
    1822182621,550 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-15 to 3002938T7930000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K25800000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2590000
    182212262660 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2610000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381677K2620000
     
    High-Load 863 Iron Copper
    1622162831,400 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7119N1570000
    1622202831,750 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7119N1580000
    1822182621,550 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7119N1610000
    1822222621,900 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7119N1620000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    1822181,000 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K17400000
    1822221,200 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4381688K1750000
     
    High-Load 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7460N1720000
    1622201,750 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7460N1730000
    1822221,900 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—7460N1750000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1822181,000 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K17400000
     
    High-Load 863 Iron Copper
    1622161,400 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1720000
    1622201,750 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N1730000
    1822221,900 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B4397407N17500000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Food Industry Std.
    Each
    841 Bearing Bronze
    162216283790 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K8800000
    162220283990 lb. @ 60 rpm1,250 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K890000
    1822182621,000 lb. @ 60 rpm850 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35703746K920000
     
    back to top