McMaster-Carr logo
    Filter by
    System of Measurement
    Shaft Diameter
    Attribute Image
    OD
    Attribute Image
    Plain Bearing Type
    For Housing ID
    Attribute Image
    Shaft Mount Type
    Lubrication
    Flange OD
    Attribute Image
    Flange Thickness
    Bearing Type
    Shaft Type
    Lubrication Method
    Minimum Temperature
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    DFARS Specialty Metals
    Maximum Temperature
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    42 Products

    Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    182412660 lb. @ 60 rpmSynthetic Oil-35 to 3000000000000000
    182416890 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1824181,000 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1824221,200 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    1824301,650 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    202416990 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    2024201,200 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    2024251,550 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    2024301,850 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    2024321,950 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
     
    High-Load 863 Iron Copper
    1824181,550 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    2024161,400 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    2024201,750 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
     

    Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings.
    Install and forget these self-lubricating bearings. All are made from porous metal and saturated with oil to reduce maintenance and downtime. A good all-around choice, they are used in everything from palm-sized fans in electronics to tire-sized pulleys. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. Consider a graphite-lubricated bearing for higher temperatures or places where you can’t afford the mess. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    1824183031,000 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    1824223031,200 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    202412282740 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-35 to 300000000000000
    202416282990 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
    2024202821,200 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-35 to 30000000000000
     
    High-Load 863 Iron Copper
    1824223031,900 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    2024122821,050 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    2024162821,400 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
    2024202821,750 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic Oil-15 to 300000000000000
     

    Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    202416990 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4380000000000000
    2024201,200 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B438000000000000
     
    High-Load 863 Iron Copper
    1824181,550 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    2024161,400 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    2024201,750 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
     

    Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Ultra-Low-Friction Oil-Embedded Flanged Sleeve Bearings.
    Our slipperiest metal bearings, these are ideal for machinery with frequent starts and stops, such as conveyors. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Specs.
    Met
    Each
    841 Bearing Bronze
    1824183031,000 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B4380000000000000
    1824223031,200 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B438000000000000
    202412282740 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B438000000000000
    2024202821,200 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300ASTM B438000000000000
     
    High-Load 863 Iron Copper
    1824183031,550 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    1824223031,900 lb. @ 60 rpm1,300 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    2024122821,050 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    2024162821,400 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
    2024202821,750 lb. @ 60 rpm940 lb. @ 60 rpmSynthetic OilPTFE
    		-60 to 300—000000000000
     

    Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Oil-Embedded Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for contact with food, consider dry-running sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Dynamic Radial Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    202416990 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35700000000000000
     
    High-Load 863 Iron Copper
    1824181,550 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B439000000000000
    2024161,400 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, ASTM B439000000000000
     

    Oil-Embedded Flanged Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Contains Annotated. Flanged Sleeve Bearings. Oil-Embedded Flanged Sleeve Bearings for Food and Beverage.
    These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for incidental contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. If you need a bearing rated for direct contact with food, consider dry-running flanged sleeve bearings for food and beverage. All are fabricated, lubricated, and inspected in the U.S.
    Flanged sleeve bearings combine a sleeve and thrust bearing in one. The flange supports thrust loads and prevents the bearing from being pushed out of place. The sleeve is the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    For Shaft
    Dia., mm
    For Housing
    ID, mm
    Lg.,
    mm
    Flange
    OD, mm
    Flange
    Thk., mm
    Dynamic Radial Load
    Cap. @ Speed
    Dynamic Thrust Load
    Cap. @ Speed
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    1824183031,000 lb. @ 60 rpm1,400 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.35700000000000000
    202412282740 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
    2024202821,200 lb. @ 60 rpm930 lb. @ 60 rpmSynthetic Oil-75 to 300FDA Compliant 21 CFR 178.357000000000000
     
    back to top