About Plain Bearings
More
Oil-Embedded Flanged Sleeve Bearings
Startup friction causes these bearings to release a thin layer of oil on the bearing’s surface. They’re flanged, so they handle loads both parallel and perpendicular to the shaft. They’re also known as Oilite® bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Lubrication | Lubricant | Temperature Range, °F | Each | |
Metric 841 Bronze Bearings | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For 3mm Shaft Dia. | ||||||||||
| 4.5mm | 3mm | 7.5mm | 0.75mm | 27 lbs. @ 120 rpm | 115 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 000000 |
| 4.5mm | 5mm | 7.5mm | 0.75mm | 46 lbs. @ 120 rpm | 115 lbs. @ 120 rpm | Lubricated | SAE 30 Oil | -35° to 300° | 00000000 | 00000 |
Light Duty Dry-Running Flanged Sleeve Bearings
Use where high loads and speeds are not required.
Thermoplastic-blend bearings have low moisture absorption and create very low friction in applications with light loads, and frequent starts and stops.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic-Blend Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3mm Shaft Dia. | |||||||||
| 4.5mm | 3mm | 7.5mm | 0.75mm | 36 lbs. @ 120 rpm | 60 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 00000 |
| 4.5mm | 5mm | 7.5mm | 0.75mm | 60 lbs. @ 120 rpm | 60 lbs. @ 120 rpm | Yellow | -50° to 190° | 00000000 | 0000 |
Ultra-Low-Friction Dry-Running Flanged Sleeve Bearings
Use these bearings in applications with frequent starts and stops because they operate with very little friction.
Thermoplastic blend bearings create the least amount of friction of any bearing that we offer. They handle heavier loads than PTFE and Rulon J bearings.
Note: Dynamic load capacity is the maximum load a bearing can withstand at a given shaft speed. If your application’s load and speed requirements are below the values listed, the bearing will work.
For technical drawings and 3-D models, click on a part number.
| For Housing ID | Lg. | Flange OD | Flange Thick. | Dynamic Radial Load Capacity | Dynamic Thrust Load Capacity | Color | Temperature Range, °F | Each | |
Thermoplastic Blend Bearings | |||||||||
|---|---|---|---|---|---|---|---|---|---|
For 3 mm Shaft Dia. | |||||||||
| 4.5mm | 5mm | 7.5mm | 0.75mm | 85 lbs. @ 120 rpm | 85 lbs. @ 120 rpm | Yellow | -55° to 190° | 0000000 | 00000 |