Slip these bearings onto a shaft and secure with the included set screws, no special tools required.

Ball bearings operate with less friction than other bearings, so they can run at higher speeds.

A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Use these bearings in corrosive environments and under water.

These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.

Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.

The lubricant in these mounted ball bearings is suitable for incidental contact with food.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.

Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.

Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.

Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.

The tapered rollers in these bearings support large shafts at high static loads.

With all three mounting holes on one side, you can position the bearing above or below the mounting surface.