Attach these lifters to FANUC CRX or Universal Robots collaborative robots. They handle items up to 3.5 times heavier than our lifters for lightweight items. Because they use electricity to pick up and move items with suction, there’s no need for compressed air or air control valves. They don’t have pinch points or sharp edges, so they help you meet ISO/TS 15066 international safety standards for people working near robots.

Often used in packaging, palletizing, and material handling, these lifters can grip everything from cardboard boxes to bags of screws. With soft rubber cups, they’re less likely than pick-and-place grippers to damage glass, thin plastic, and other delicate objects. To install, plug the cord into your robot arm. It carries both power and control signals.

Made for FANUC CRX and Universal Robots collaborative robots, these lifters use suction to pick up and move lightweight items, up to 6 lbs. They run on electricity, so you don’t need compressed air or air valves. Often used in packaging, palletizing, and material handling, these lifters can grip everything from small cardboard boxes to bagged screws. With soft rubber cups, they’re less likely than pick-and-place grippers to damage glass, thin plastic, and other delicate materials. They’re also simple to set up—a single cord supplies both power and control to your robot arm. They help you meet ISO/TS 15066 international safety standards for people working near robots because there are no pinch points or sharp edges.

Grip, lift, and move materials with uninterrupted suction—even in dusty environments. These lifters have no moving parts, so they’re less prone to clogs from dust and debris. Also known as venturi devices, you connect them to any compressed air source and they’ll generate suction through a single nozzle—no need for a centralized vacuum system. If a clog does occur, you can clear it easily by reversing the airflow.

These lifters activate and release quickly, so they’re ideal for vacuum packaging and pick-and-place tasks. You can join multiple lifters together to create a system. Even if one vacuum cup fails to grip, the others will keep working.

They include an exhaust muffler that reduces noise and filters debris without impeding airflow. The vacuum cups are Buna-N to resist abrasion and oil. Use them on nonporous surfaces such as metal, glass, and plastic.

Equip your collaborative robot with all it needs to lift bottles and other items with complex shapes. These lifters have a flexible balloon-like cup that conforms to the sharp curves, angles, and uneven surfaces of items that other vacuum lifters may struggle to pick up. Made of Buna-N, the cup resists oil and abrasion. It works for most lifting, including packaging and material handling. A rubber cushion inside the cup protects lifted items from damage if they hit the housing. The cup is held in place with stainless steel spring bands. Slip them off to replace a worn cup.

These lifters come with a robot arm mount, vacuum generator, and power cord for a quick, easy setup. Use the mount to bolt them directly to your robot arm. The cord plugs right into your robot arm for power and control. Because the suction is generated by electricity, there’s no need for compressed air or air control valves. You can configure digital inputs and outputs in your robot’s control program to turn suction on and off.