McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    24 Products

    Tapered Round Bellows with Cuff End and Flange End

    Image of Product. Front orientation. Bellows. Tapered Round Bellows with Cuff End and Flange End .
    Image of Attribute. Front orientation. Contains Annotated. Bellows. Tapered Round Bellows with Cuff End and Flange End .
    Attach the cuff end with a hose clamp (not included), and screw mount the flange end. Also known as boots, these bellows are often used on CV joints. All are molded, which means they're airtight to keep contaminants out. Air venting may be necessary in fast-cycling applications. Slide these bellows over moving parts, such as rods and shafts.
    0.04" to 0.07" Thick Material—0.04″-0.07″ thick bellows are more durable than 0.02″-0.04″ thick bellows, making them good for applications where parts are constantly moving.
    ID
    Lg.
    Cuff
    Flange
    OD
    Extended
    Retracted
    Travel
    Cuff
    Lg.
    Material
    Temp. Range,
    ° F
    Mounting Fasteners
    Included
    Each
    Protects Against Abrasive Grit, Acid, Cutting Fluid, Dust, Metal Chips, Oil, Salt Water, Synthetic Oil, Water, and Wood Chips
     
    0.02" to 0.04" Thick Material
    3/8"2"2 1/2"1 3/4"1/2"1 1/4"3/8"Neoprene0 to 220No9744K19000000
    1/2"1 1/4"1 3/4"5 1/2"1 5/16"4 3/16"1/4"Neoprene0 to 220No9744K1200000
    1"3 1/2"4 3/4"6"1 1/2"4 1/2"1"Neoprene0 to 220No9744K1700000
     
    0.04" to 0.07" Thick Material
    3/8"2"3 1/4"1 3/4"1/2"1 1/4"3/8"Neoprene0 to 220No9744K2100000
    1/2"1 1/4"2"5 1/2"1 5/16"4 3/16"1/4"Neoprene0 to 220No9744K2200000
    1"3 1/2"4 1/2"6"1 1/2"4 1/2"1"Neoprene0 to 220No9744K2300000
     

    Metal Telescoping Bellows

    Image of Product. Front orientation. Bellows. Metal Telescoping Bellows .
    Image of Attribute. Front orientation. Contains Annotated. Bellows. Metal Telescoping Bellows .
    Made of coiled spring steel, these bellows protect equipment from hot and sharp chips. Slide them over moving parts, such as rods and shafts, and their spring action will hold them in place as they extend and retract between two parallel surfaces. Choose a bellows with an ID that's at least 1/4" larger than the diameter of the item to be covered.
    Lg.
    ID
    OD
    Extended
    Retracted
    Travel
    Material
    Material
    Thk.
    Each
    Protects Against Dust, Solvents, Sparks, Abrasive Grit, Coolant, Cutting Fluid, Metal Chips, Oil, and Synthetic Oil
    1/2"1"4"1/2"3 1/2"Spring Steel0.01"93735K32000000
    3/4"1 3/8"10"3/4"9 1/4"Spring Steel0.01"93735K3600000
    1"1 3/4"10"1"9"Spring Steel0.015"93735K4300000
    1 1/4"2 1/16"1 ft.1 3/8"10 5/8"Spring Steel0.015"93735K4700000
    1 1/2"2 1/4"10"1 3/8"8 5/8"Spring Steel0.015"93735K4900000
    1 1/2"2 3/8"1 1/2 ft.2"16"Spring Steel0.015"93735K5100000
    1 3/4"2 3/4"3 ft.3"33"Spring Steel0.015"93735K64000000
    2 1/4"3 5/8"3 ft.3"33"Spring Steel0.02"93735K74000000
     

    Tapered Round Bellows with Cuff Ends

    Image of Product. Front orientation. Bellows. Tapered Round Bellows with Cuff Ends .
    Image of Attribute. Front orientation. Contains Annotated. Bellows. Tapered Round Bellows with Cuff Ends .
    Secure the cuff ends with hose clamps (not included). Also known as boots, these rubber bellows are often used on CV joints. All are molded, which means they're airtight to keep contaminants out. Air venting may be necessary in fast-cycling applications. Slide these bellows over moving parts, such as rods and shafts.
    Lg.
    Extended
    Retracted
    Travel
    Cuff Lg.
    Material
    Material Thk.
    Temp. Range,
    ° F
    Max. Temp.,
    ° F
    Each
    Protects Against Abrasive Grit, Acid, Cutting Fluid, Dust, Metal Chips, Oil, Salt Water, Synthetic Oil, Water, and Wood Chips
     
    1 3/4" × 3 1/2" ID, 4 1/8" OD
    2 1/2"5/8"1 7/8"1"Neoprene0.02" to 0.04"0 to 2202209744K18000000
     
    1 3/4" × 4 1/2" ID, 4 5/8" OD
    7 1/8"1 7/8"5 1/4"1/2" × 3/8"Neoprene0.02" to 0.04"0 to 2202209744K1300000
     

    Hydraulic Cylinder Bellows

    Image of Product. Front orientation. Bellows. Hydraulic Cylinder Bellows .
    Slip these bellows over hydraulic cylinder rods to keep them free from debris for a long service life. Sewn seams let these bellows breathe, so they retract quickly in fast-cycling applications. The seams will allow small amounts of moisture and dust to pass through. All of these bellows are sized to fit standard hydraulic cylinders. Secure the cuff ends with the included hose clamps.
    For
    Hydraulic Cylinder
    Overall
    Ht.
    Overall
    Wd.
    For Max.
    Stroke Lg.
    Material
    Material
    Thk.
    Max. Temp.,
    ° F
    Includes
    Each
    Protects Against Abrasive Grit, Dust, Synthetic Oil, and Water
    2 1/2"2 1/2"6"Nylon Fabric0.018"250Hose Clamps2460N2010000000
    2 1/2"2 1/2"12"Nylon Fabric0.018"250Hose Clamps2460N202000000
    3"3"6"Nylon Fabric0.018"250Hose Clamps2460N203000000
    3"3"12"Nylon Fabric0.018"250Hose Clamps2460N204000000
    3 1/2"3 1/2"6"Nylon Fabric0.018"250Hose Clamps2460N205000000
    3 1/2"3 1/2"12"Nylon Fabric0.018"250Hose Clamps2460N206000000
    4 1/2"4 1/2"6"Nylon Fabric0.018"250Hose Clamps2460N207000000
    4 1/2"4 1/2"12"Nylon Fabric0.018"250Hose Clamps2460N208000000
     
    back to top