Bend wire and rod up to _3/8" diameter and flat stock up to _1/2"×_3/16" to create hooks, brackets, and pipe hangers. They can be clamped in a vise.

Make bends up to 90° in metal sheets to form items such as boxes and trays. Benders attach to your bench top and have a brake bar that adjusts for different stock thicknesses and bend angles.

These benders are compatible with plastics such as acrylic, polyethylene, polypropylene, polycarbonate, PVC, CPVC, ABS, and Kydex. Place a sheet between the heating bars to soften it. Heating time varies between 30 seconds and 12 minutes based on material type and thickness. Use wood or metal supports (not included) under the sheet during heating.

V-Groove Attachments—V-groove attachment creates sharp, nonradius 90° bends in polypropylene and polyethylene sheets by melting a deep groove in the material. Excess material forms a raised edge along the inside of the bend to reinforce the angle.

These benders have a hook to hold your tubing securely in place.

Create smooth, accurate bends in round heat pipe for routing heat away from sensitive electronic components and toward a heat sink. These specially designed tools allow a smooth bending motion to reduce marks on your pipe, which ordinary pliers can often leave behind. All have graduation markings to prevent over bending, which can reduce the ability of your heat pipe to transfer heat. Every 45° bend in a heat pipe will reduce the cooling capacity of the heat pipe by about 2.5%. Place these tools on benches, vises, and workstations without scratching them—all have rubber mounting feet.

Follow the easy-to-read markings to bend conduit to the angle you need. Handles are labeled with a bending guide.

Ratcheting action gives these tools greater leverage than standard tube benders for bending thick-wall material.

Flatten bumps, bends, and curves on coiled wire with these straighteners. They have roller wheels that apply consistent pressure along the wire for a smooth, straight result. Grooves in the wheels hold the wire in place as you manually move it through, so you don't need a wire feeder. To straighten wire with different diameters, twist the adjustment knob to change the spacing between wheels.

Use one hand to make bends up to 90° in soft metal tubing.

Powerful enough to bend conduit and pipe to the angle you need, this bender is for use on Schedule 40 pipe.

When you're working with exposed conduit, these benders make offset bends so your conduit matches knockout holes in electrical boxes. Insert the conduit, and press and release the handle to make offset bends.

Grip, cut, and connect wire with a single tool. A favorite of electricians, these pliers strip wire with a quick squeeze and double as a crimper for securing terminals.