McMaster-Carr logo
    Filter by
    Number of Jaws
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Jaw Tip Thickness
    Attribute Image
    Jaw Profile
    Jaw Control Type
    Leg Thread Size
    Industrial Info Compare
    For Maximum Screw Size Diameter
    Fasteners Required
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    116 Products

    Expanding-Collar Internal-Grip Gear and Bearing Pullers

    Get a grip on objects with blind holes—these pullers have an expanding collet that secures bearings and bushings from inside.
    Pin and Pin Adapter Required
    Image of Product. Front orientation. Gear and Bearing Pullers. Expanding-Collar Internal-Grip Gear and Bearing Pullers , Pin and Pin Adapter Required.
    Pullers with pin and pin adapter expand the collet inside the object you’re pulling.
    Pullers
    Pins
    Pin Adapter
    For Shaft Dia.
    Puller
    Material
    For Pin
    Dia.
    Each
    Each
    Each
    5/16" to 11/32"Steel5/32"000000000000000000000000000000000000000000
    11/32" to 7/16"Steel3/16"000000000000000000000000000000000000000
    7/16" to 9/16"Steel9/32"000000000000000000000000000000000000000
    9/16" to 7/8"Steel13/32"000000000000000000000000000000000000000
    Accessories for Gear and Bearing Pullers
    2.5-lb. Slide Hammer (⅝"-18 Thread Size)—When the collet is secure, use a slide hammer to apply force to the object you’re removing.
    Each
    Forcing Screw Nut (¾"-16 Thread Size)0000000000000
    Forcing Screw (⅝"-18 and ¾"-16 Thread Sizes; 12 ¹¹⁄₃₂" Length)000000000000
    2.5-lb. Slide Hammer (⅝"-18 Thread Size)00000000000
    Ready to Use
    Image of Product. Back orientation. Gear and Bearing Pullers. Expanding-Collar Internal-Grip Gear and Bearing Pullers , Ready to Use.
    Ready-to-use pullers have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge or a slide hammer (both sold separately) to apply force. A safety catch prevents the puller from overextending.
    For Shaft Dia.
    Thread
    Size
    Puller
    Material
    Each
    1/4" to 3/8"M7
    		Steel00000000000000
    3/8" to 1/2"M7
    		Steel0000000000000
    1/2" to 5/8"M7
    		Steel0000000000000
    5/8" to 3/4"M7
    		Steel0000000000000
    3/4" to 7/8"M10
    		Steel0000000000000
    3/4" to 1 3/16"M10
    		Steel0000000000000
    1 3/16" to 1 5/8"M10
    		Steel0000000000000
    1 3/8" to 1 7/8"M15
    		Steel0000000000000
    1 3/4" to 2 1/4"M15
    		Steel0000000000000
    2 1/4" to 4 3/8"1/2"-14
    		Steel0000000000000
    3 7/8" to 7 7/8"3/4"-14
    		Steel0000000000000
    Accessories for Gear and Bearing Pullers
    Gear and Bearing Puller Bridges
    Image of Product. Top orientation. Gear and Bearing Puller Bridges.
    For Thread
    Size
    Reach
    Lg.
    Wd.
    Includes
    Each
    M7, M10
    		4 3/4"2 3/16"Forcing Screw with T-Handle000000000000000
    M10, M15
    		6 7/16"3 7/8"Forcing Screw with T-Handle00000000000000
    M15
    		11"7 1/16"Forcing Screw with T-Handle00000000000000
    1/2"-14
    		8 1/16"7 3/4"Forcing Screw with T-Handle00000000000000
    3/4"-14
    		10 3/16"11 3/4"Forcing Screw with T-Handle00000000000000
    Gear and Bearing Puller Slide Hammers
    Image of Product. Front orientation. Gear and Bearing Puller Slide Hammers.
    For Thread Size
    Wt.,
    lb.
    Overall
    Lg.
    Material
    Each
    M7, M10
    		1.611 3/8"Steel000000000000000
    M10, M15
    		612 1/4"Steel00000000000000
    1/2"-14, 3/4"-14
    		19.827 5/8"Steel00000000000000

    Expanding-Collar Internal-Grip Gear and Bearing Puller Sets

    Get a grip on objects with blind holes—these puller sets have a variety of expanding collets that secure bearings and bushings from inside.
    Ready to Use
    Image of Product. Front orientation. Gear and Bearing Pullers. Expanding-Collar Internal-Grip Gear and Bearing Puller Sets , Ready to Use.
    Ready-to-use puller sets have a nut that you tighten down to expand the collet jaws inside the object you’re pulling. When the collet is secure, use a bridge to apply force. A slide hammer can provide extra force to extract hard-to-remove objects. A safety catch prevents the puller from overextending.
    For Shaft Dia.
    Puller
    Material
    Includes
    Each
    3/16" to 2 3/4"SteelEight Pullers with Nut
    Two Bridges with T-Handle Forcing Screw (1 of Each: 4 1/2" Reach and 2 3/16" Width, 6 1/2" Reach and 3 7/8" Width)
    Grease    		00000000000000000
    1/4" to 1 3/16"SteelFour Pullers with Nut
    1 lb. Slide Hammer (M12 Thread Size)
    Handle for Slide Hammer
    Bridge with T-Handle Forcing Screw (4 1/2" Reach, 2 3/16" Width)
    Grease    		00000000000000
    1 1/8" to 2 3/4"SteelFour Pullers with Nut
    2 lb. Slide Hammer (M12 Thread Size)
    Handle for Slide Hammer
    Bridge with T-Handle Forcing Screw (6 1/2" Reach, 3 7/8" Width)
    Grease    		00000000000000
    2 3/8" to 6 1/8"SteelGrease
    Puller
    Bridge with T-Handle Forcing Screw (9 3/8" Reach, 9 7/8" Width)    		0000000000000000

    High-Force External-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. High-Force External-Grip Gear and Bearing Puller Sets .
    Move the immovable—these puller sets include a hand pump and hydraulic cylinder, so you can create a large amount of pulling force. However, these pullers produce more direct, constant thrust than pullers with a forcing screw. They have mounting holes in both a 2- and 3-jaw configuration for attaching the jaws either way. The jaws have no control mechanism, so they swing free.
    Wt. Cap.,
    ton
    Puller
    Material
    Includes
    Each
    17 1/2Steel3-Jaw External-Grip Hydraulic Puller (For Up To 20" OD, 11 1/2" Reach Length)
    Face-Grip Hydraulic Puller with End Caps (For 5 3/4"-11 3/4" OD, 18 1/2" Reach Length)
    3-to-2 Jaw Head Converter for 3-Jaw External-Grip Hydraulic Puller
    Adjusting Screw
    Bearing Separator (1/2"-9" Spread)
    Crank Handle
    Hose Half Coupler with Dust Cap
    Hydraulic Cylinder (2" Stroke)
    Hydraulic Hose - 6 Feet
    Internal-Grip Jaw Attachment (For 1 1/2"-9" OD, 4" Reach Length) for 3-Jaw External-Grip Hydraulic Puller
    Pair of Legs (22 1/2" Reach Length) for Face-Grip Puller
    Pressure Gauge
    Single Stage Hydraulic Hand Pump Assembly
    Tee Adapter
    Three Threaded Adapters
    Two Pushing Adapters
    Wood Case    		0000000000000000

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Narrow Jaw—Bar Control.
    Image of Product. Front orientation. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets , Standard and Narrow Jaw—Bar Control.

    Narrow Jaw—Bar Control

    Standard and Narrow Jaw—Bar Control

    To quickly grip objects from either the outside or inside, all the pullers in these sets have reversible jaws that stay aligned. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    The pullers in these sets can either be used with two or three jaws. Use two jaws for tight spots where three jaws won’t fit. When space allows, pullers with three jaws are more stable and more evenly distribute pulling force compared to pullers with two jaws.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Thread Size
    Includes
    Each
    Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    5 1/2SteelSteelM14 × 1.5 mmQuick-Hold 2-Jaw Reversible External/Internal Grip Puller
    Three Sets of Narrow-Profile Jaws (For 2 3/4"-7 1/8" ID, For 1 1/16"-5 1/8" OD, 3 15/16"-9 13/16" Reach)
    Set of Jaw Extensions (3 15/16" Long)
    Forcing Screws (1 of each: 6 5/16" Long, 9 13/16" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		00000000000000
     
    Standard and Narrow Jaw—Bar Control
     
    Two Jaws and Combination 2/3 Jaws with Tips on One End
    7 1/2SteelSteel1/2"-14
    		Quick-Hold 2-Jaw Reversible External/Internal Grip Puller
    One Set of Narrow-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    One Set of Standard-Profile Jaws (For 3 7/8"-10 1/4" ID, For 1 3/8"-7 7/8" OD, 5 15/16"-11 13/16" Reach)
    Two Sets of Jaw Extensions (5 15/16" Long)
    Forcing Screws (1 of each: 8 5/16" Long, 14" Long)
    2-to-3 Jaw Converter
    Grease
    Plastic case    		000000000000000
     

    Face-Grip Gear and Bearing Pullers

    Install and remove bearings, pulleys, sprockets, and other press-fit parts with tapered holes. Face-grip pullers can be used with Bearing Separators and V-Belt Pulley Separators (not included). Select a separator with a thread size that matches the leg thread size of your face-grip puller.
    Legs and replacement legs (both sold separately) come in pairs. Choose from the legs to change the reach of your face-grip puller.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. Face-Grip Gear and Bearing Pullers .
    Pullers
    Replacement Legs
    Forcing Screw
    Fasteners
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Pipe
    Size
    Leg Thread
    Size
    For Screw
    Type
    For Max.
    Screw Size Dia.
    Req.
    Included
    End Cap
    Lg.
    Includes
    Each
    Pair
    1 1/4" to 4 1/2"5 7/8"3SteelSteel6 1/8"M12 × 1.5 mm—M10 × 1.5 mm——NoNo—Forcing Screw00000000000000———0
    1 1/2" to 4 1/4"2"Not RatedSteelSteel13"5/8"-18
    		——Cap3/8"YesYes—Forcing Screw
    Two 3/8"-16 × 3" Cap Screws    		00000000000———0
    2" to 7 3/4"—Not RatedSteelSteel11 5/8"3/4"-16
    		——Cap1/2"YesNo—Forcing Screw000000000000———0
    2 1/4" to 7 1/4"6 3/4"10SteelSteel12"3/4"-16
    		—5/8"-18
    		——NoNo1 1/2"Forcing Screw0000000000000000000000000000
    2 1/2" to 5 3/4"7 7/8"5 1/2SteelSteel8"M18 × 1.5 mm—M10 × 1.5 mm——NoNo—Forcing Screw0000000000000———0
    2 3/4" to 9 1/2"10 1/4"7 1/2SteelSteel7 1/2"1/2"-14
    		—M14 × 1.5 mm——NoNo—Forcing Screw0000000000000———0
    3" to 12"11 3/4"11SteelSteel13 1/4"—3/4
    		M18 × 1.5 mm——NoNo—Forcing Screw0000000000000———0
    3 1/4" to 11 3/4"9 1/2"17 1/2SteelSteel13 1/4"1"-14
    		—5/8"-18
    		——NoNo2"Forcing Screw000000000000000000000000000
    7" to 16 1/4"8 1/2"30SteelSteel17 1/4"1 1/2"-12
    		—1"-14
    		——NoNo2"Forcing Screw000000000000000000000000000
     
    Gear and Bearing Puller Legs
    Pair
    Legs for 10-ton Capacity Pullers (11 ¾" Reach)00000000000000
    Legs for 10-ton Capacity Pullers (15 ¾" Reach)0000000000000
    Legs for 17 ½-ton Capacity Pullers (4 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (16 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (22 ½" Reach)00000000000000
    Legs for 17 ½-ton Capacity Pullers (30" Reach)00000000000000
    Legs for 30-ton Capacity Pullers (18" Reach)00000000000000
    Legs for 30-ton Capacity Pullers (28" Reach)00000000000000

    Internal-Grip Gear and Bearing Pullers

    Also known as a pilot bearing puller, use this puller to grip the interior edge of press-fit bearings, oil seals, and bushings. It has a slide hammer that provides force to extract hard-to-remove objects. Choose from the jaws (sold separately) to increase the for ID size and reach of your puller. Jaws are sold individually.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Gear and Bearing Pullers. Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End.
    For ID
    Reach
    Lg.
    Wt. Cap.
    Puller
    Material
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Each
    1/2" to 1 1/2"3/4"Not RatedSteel4 1/4"7/16" × 1/8"0000000000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Each
    Jaw (For 1"-2 ¼" ID; 1" Reach)000000000000
    Jaw (For ½"-2" ID; 1 ¾" Reach)00000000000
    Narrow Head (For 1/2"-1 3/8" ID; 1/2"-20 Thread Size)000000000000
    Replacement 1 ¾-lb. Slide Hammer (½"-20 Thread Size)00000000000

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws—Bar Control.
    Image of Product. Two Jaws and Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, .

    Two Jaws—Bar Control

    Two Jaws and Combination 2/3 Jaws

    Image of Product. 4 Two Jaws and 2 Combination 2/3 Jaws. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets, Two Jaws and Combination 2/3 Jaws, 5 ton to 10 ton Capacity.

    4 Two Jaws and 2 Combination 2/3 Jaws

    Tackle a wide variety of pulling jobs—use pullers in these sets to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Combination 2/3 Jaw—Pullers with combination 2/3 jaws have mounting holes in both a 2-jaw and 3-jaw configuration, so you can attach the jaws either way to suit your application.
    Two Jaw—Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Wt. Cap.,
    ton
    Puller
    Material
    Forcing Screw
    Material
    Includes
    Each
    Two Jaws—Bar Control
    5SteelSteelCrossbar
    Forcing Screw (7/8"-9" Thread Size, 8" Long)
    Four Sets of Jaws (5", 6", 6" Tapered Tip, and 8" Reach)
    Two Jaw-Mounting Screws    		000000000000000
     
    Two Jaws and Combination 2/3 Jaws
    Not RatedSteel—Slide Hammer Puller with Grip Handle
    Clamping Cone
    Puller Hook
    2-Jaw Jaw Bar
    4 Sets of 2/3 Reversible-Jaw External/Internal Jaws (For 1"-8" ID, For 1/4"-6 3/4" OD, 4 3/4"-6 1/2" Reach)    		0000000000000
    5 to 10Steel—2-Reversible-Jaw External/Internal Grip Puller —5-ton Capacity (For 5/8"-6" OD)
    2/3-Jaw External Grip Puller—10-ton Capacity (For Up To 16" OD, 11" Reach)
    2-Reversible-Jaw External/Internal Grip Puller —7-ton Capacity (For 1/2"-8 5/8" OD)
    Internal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		000000000000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Straight-Tip Jaw for 6337K1 (25 tons; 6" Reach)0000000 Pair 0000000
    Straight-Tip Jaw for 6337K1 (25 tons; 10" Reach)0000000 Pair 000000
    Replacement Crossbars for 6337K1 (5 tons; Includes: Forcing Screw)0000000 Each 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 5" Reach)0000000 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 6" Reach)0000000 Pair 000000
    Replacement Straight-Tip Jaw for 6337K1 (5 tons; 8" Reach)0000000 Pair 000000
    Replacement Tapered-Tip Jaw for 6337K1 (5 tons; 6" Reach)0000000 Pair 000000

    Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    Grip objects on the outside or inside to tackle both types of pulling jobs. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out. Use the slide hammer to extract hard-to-remove objects.
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End.
    Puller has combination 2/3 jaws—it comes with a jaw bar so you can change between 2-jaw and 3-jaw configurations to suit your application.
    For ID
    For OD
    Reach Lg.
    Wt. Cap.
    Puller
    Material
    T-Handle
    Material
    Includes
    Each
    1 1/4" to 4 1/4"1" to 4 1/2"1 1/4", 3"Not RatedSteelSteelT-Handle0000000000000
     
    Accessories and Replacements for Gear and Bearing Pullers
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)—Crossbar allows you to pull objects that have tapped holes. Thread the center hole onto the slide hammer; requires two 3/8" dia. cap screws (not included).
    Replacement Jaw Bar (⅝"-18 Thread Size)—Replacement jaw bar converts the 3-jaw puller to a 2-jaw puller.
    Each
    Crossbar (For 1 ⅞"-5 ⅝" ID; For 1 ⅞"-5 ⅝" OD; For 0.375" Dia. Cap Screw)000000000000
    Internal Jaw (For ¾"-2 ½" ID; 2 ⅜" Reach)000000000000
    External/Internal Jaw (For 1 ¼"-3 ½" ID; For 1"-4 ½" OD; 3 ¾" Reach)000000000000
    External/Internal Jaw (For 1 ½"-4 ½" ID; For ¾"-5" OD; 4 ⅛" Reach)000000000000
    External/Internal Jaw (For 2 ¾"-5 ½" ID; For ¾"-7 ½" OD; 6 ½" Reach)000000000000
    Puller Hook (For ⅝" Minimum ID)00000000000
    2.5-lb. Slide Hammer (⅝"-18 Thread Size)00000000000
    5-lb. Slide Hammer (⅝"-18 Thread Size)00000000000
    Replacement Jaw Bar (⅝"-18 Thread Size)00000000000
    Replacement Adjusting Cone0000000000000

    Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers

    With reversible jaws that stay aligned, these pullers can quickly grip objects from the outside or inside. They’re often used to pull bearings and pulleys. To grip objects on the outside, attach the jaws with tips facing in. To grip objects from inside, attach the jaws with tips facing out.
    Two Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Two Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Two-jaw pullers have a slimmer profile than pullers with more jaws, so they fit in tighter spaces.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    3 3/4" to 6 1/4"1/2" to 5"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw00000000000000
    4" to 4 3/4"1/4" to 3 1/2"3 7/8"5SteelSteel7 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"1/2" to 6 1/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    4" to 10 1/4"1/2" to 7 3/4"5 7/8"10SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7" to 17 1/4"0" to 13 3/4"7 7/8"12SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7 3/4" to 23 1/4"1/2" to 20 1/2"11 7/8"15SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    2 3/4" to 7"1/4" to 4 3/4"3 7/8"4 1/2SteelSteel7 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw0000000000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"9 1/2SteelSteel10"1/2"-14
    		6"1 1/4" × 5/32"Forcing Screw0000000000000
    7" to 13 1/2"3/4" to 9 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
    7" to 17 1/4"3/4" to 13 3/4"7 7/8"11 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
     
    Three Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Standard Jaw—Bar Control.
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Three Jaws with Tips on One End, Narrow Jaw—Bar Control.

    Standard Jaw—Bar Control

    Narrow Jaw—Bar Control

    Three-jaw pullers are more stable and more evenly distribute pulling force than two-jaw pullers. Use them when space allows.
    Narrow Jaw—Narrow pullers have both narrow jaws and narrow jaw tips to grip objects in tight spaces.
    Bar Control—Pullers with a bar keep jaws straight at 90° as you slide them in and out. They won't kick out like the jaws do in caged pullers.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Standard Jaw—Bar Control
    2 3/4" to 5 1/2"0" to 3 1/2"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw00000000000000
    2 3/4" to 7"0" to 5"3 7/8"6 1/2SteelSteel6 1/4"M14 × 1.5 mm4"13/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"0" to 6 1/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    4" to 10 1/4"0" to 7 3/4"5 7/8"11 1/2SteelSteel10"1/2"-14
    		6"15/16" × 3/16"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13 1/2SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    7" to 17 1/4"4 1/4" to 14 3/4"7 7/8"13 1/2SteelSteel17 3/4"1"-117 3/4"1 3/8" × 5/32"Forcing Screw0000000000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"11 7/8"16 1/2SteelSteel17 3/4"1"-1111 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    8 3/4" to 19 3/4"4 1/4" to 14 3/4"19 3/4"16 1/2SteelSteel17 3/4"1"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    11" to 23 1/2"5" to 20 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
    11 1/2" to 29 1/4"6" to 25 1/2"19 3/4"22SteelSteel16 3/8"1 1/8"-1119 3/4"1 3/8" × 5/32"Forcing Screw000000000000000
     
    Narrow Jaw—Bar Control
    2 3/4" to 5 1/2"1/4" to 3 1/2"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    2 3/4" to 7"1/4" to 5"3 7/8"6SteelSteel6 1/4"M14 × 1.5 mm4"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 8 3/4"3/4" to 6 1/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw0000000000000
    4" to 10 1/4"3/4" to 7 3/4"5 7/8"11SteelSteel10"1/2"-14
    		6"1 3/16" × 1/8"Forcing Screw0000000000000
    7" to 13 1/2"0" to 9 3/4"7 7/8"13SteelSteel13 1/4"3/4"-14
    		7 3/4"1 3/8" × 1/4"Forcing Screw0000000000000
     
    Combination 2/3 Jaws with Tips on One End
    Image of Product. Front orientation. Contains Inset. Gear and Bearing Pullers. Quick-Hold Reversible-Jaw External/Internal-Grip Gear and Bearing Pullers , Combination 2/3 Jaws with Tips on One End, Standard Jaw—Spring-Loaded Control.

    Standard Jaw—Spring-Loaded

    Control

    Combination 2/3-jaw pullers have mounting holes in both a two-jaw and three-jaw configuration, so you can attach the jaws either way. Lift up the base to add or remove jaws.
    Spring-Loaded Control—Pullers with spring-loaded jaws lock in place for quick one-hand operation. Spring tension holds the jaws against the object being pulled, so you can tighten the locking nut.
    Weight Capacity—Weight capacity is dependent on the material and thread size of the forcing screw. It should be used as a guide. If you can grip and reach an object, your puller will normally have enough power to pull it. When in doubt, choose the next larger puller size.
    Pullers
    Replacement
    Forcing Screws
    Forcing Screw
    For ID
    For OD
    Reach
    Lg.
    Wt. Cap.,
    ton
    Puller
    Material
    Material
    Overall
    Lg.
    Thread Size
    Jaw Overall
    Lg.
    Jaw Tip Wd. ×
    Jaw Tip Thk.
    Includes
    Each
    Each
    Standard Jaw—Spring-Loaded Control
    3" to 4"3" to 4"4"2SteelSteel8 3/4"M15 × 2 mm4"9/16" × 3/16"Forcing Screw000000000000000000000000000
    3" to 7"3" to 7"7"5SteelSteel11 3/4"M18 × 2.5 mm7"7/8" × 1/4"Forcing Screw0000000000000000000000000
     

    Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box

    Image of Product. Front orientation. Gear and Bearing Pullers. Reversible-Jaw External/Internal-Grip Gear and Bearing Puller Sets with Locking Storage Box .
    Complete with a locking cabinet, use the pullers in this set to tackle a wide variety of pulling jobs—use pullers to grip objects from the outside or the inside. To grip objects on the outside, attach puller jaws with tips facing in. To grip objects from inside, attach the puller jaws with tips facing out.
    Wt. Cap., ton
    Puller
    Material
    Includes
    Each
    5 1/2 to 7 1/2SteelInternal Extractor (for 1/2"-1-7/8" ID, 1-1/2" Reach)
    Six Cap Screws (3 of each: 3/8"-24 × 3" Lg., 3/8"-16 × 3" Lg.) for Adjustable Face-Grip Puller
    Steel Locking Cabinet (25 3/4" Height, 29 1/2" Width, 10" Depth)
    2/3 Reversible-Jaw External/Internal Grip Puller (For 1 1/4"-6 3/4" ID, For 1/4"-6" OD, 4-3/4" Reach) with Slide Hammer
    Adjustable Face-Grip Puller (For 3 1/4"-9 5/8" OD) with 6 3/4” Long Forcing Screw
    Adjustable Face-Grip Puller (For 3/4"-4 1/4" OD) with 4 1/4” Long Forcing Screw
    Combination 2/3-Jaw External Grip Puller—7 1/2-ton Capacity (For Up To 10 1/2" OD, 5" Reach)
    Combination 2/3-Jaw External Grip Puller—5 1/2-ton Capacity (For Up To 7" OD, 3 1/4" Reach)
    Two Sets of Long-Reach Jaws (Three Jaws for 5 1/2-ton Capacity Puller and Three Jaws for 7-ton Capacity Puller)
    Bearing Separator (1/4"-1 3/4 Spread)
    Bearing Separator (3/4"-4 1/4" Spread)    		00000000000000000
     
    back to top