McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    20 Products

    High-Output Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard blowers can handle. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, drying, ventilating, and exhausting. Blowers that weigh 280 lbs. or less can also be used for material conveying.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Blowers, Round Outlet.
    Blowers with a totally enclosed motor enclosure can be used in dirty, dusty, and wet environments.
    Blowers
    Replacement
    Wheels
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    120 ft³/min @ 5 in. H₂O
    315 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,4501/33 15/16"5"9"17 3/4"15 5/16"14 1/4"585.2 amp/2.6 amp-10 to 150SteelNo7/16"000000000000000000000000000000
    280 ft³/min @ 5 in. H₂O
    400 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,4503/43 15/16"5"9 3/4"17 11/16"15 5/16"16 1/4"628.0 amp/4.0 amp-10 to 150SteelNo7/16"00000000000000000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    120 ft³/min @ 5 in. H₂O
    315 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,4501/34"5"9"17 3/4"15 3/8"17 3/4"521.4 amp/0.7 amp-10 to 150SteelNo7/16"0000000000000000000000000000
    280 ft³/min @ 5 in. H₂O
    400 ft³/min @ 3 in. H₂O    		65 dBA @ 15 ft.3,4503/43 15/16"5"9 3/4"17 3/4"15 5/16"14 1/4"612.3 amp/1.1 amp-10 to 150SteelNo7/16"00000000000000000000000000000
     

    Corrosion-Resistant Blowers

    A 304 stainless steel housing offers good corrosion resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Rectangular Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. Corrosion-Resistant Blowers.
    Blowers
    Replacement
    Wheels
    Outlet
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Ht.
    Wd.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Temp. Range,
    ° F
    Housing Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		65 dBA @ 15 ft.3,4503/45 5/8"3 5/8"5"9"17 3/4"15 3/8"14 5/8"9.6 amp/4.8 amp-15 to 180304 Stainless SteelNo1/2"0000000000000000000000000000000
     
    120V AC/208V AC to 230V AC
     
    Single Phase—Hardwire
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,4501 1/25 5/8"3 5/8"5"10"17 3/4"15 3/8"14 5/8"13.2 amp/7.3 amp-15 to 180304 Stainless SteelNo1/2"00000000000000000000000000000
     
    208V AC to 230V AC/460V AC
     
    Three Phase—Hardwire
    195 ft³/min @ 5 1/4 in. H₂O
    345 ft³/min @ 4 1/4 in. H₂O    		68 dBA @ 15 ft.3,4503/45 5/8"3 5/8"5"9"17 3/4"15 3/8"14 5/8"2.5 amp/1.13 amp-15 to 180304 Stainless SteelNo1/2"0000000000000000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    505 ft³/min @ 4 1/2 in. H₂O
    635 ft³/min @ 3 1/4 in. H₂O    		74 dBA @ 15 ft.3,4501 1/25 5/8"3 5/8"5"10"17 3/4"15 3/8"14 5/8"3.92 amp/1.96 amp-15 to 180304 Stainless SteelNo1/2"00000000000000000000000000000
    1,600 ft³/min @ 4 1/2 in. H₂O
    1,800 ft³/min @ 3 1/4 in. H₂O    		73 dBA @ 15 ft.3,55057"5 5/8"5"12"22 1/4"20 9/16"17 5/8"11.8 amp/5.9 amp-15 to 180304 Stainless SteelNo1/2"00000000000000000000000000000
     

    Spark-Resistant Blowers

    These blowers have an aluminum housing for spark resistance. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    320 ft³/min @ 1 in. H₂O
    375 ft³/min @ 1/4 in. H₂O    		60 dBA @ 15 ft.3,4501/34"5"4 3/4"12 5/8"9 7/8"12 1/4"6.0 amp/3.2 amp0 to 150AluminumNo7/16"0000000000000000
     

    High-Output Spark-Resistant Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard spark-resistant blowers can handle. They have an aluminum housing for spark resistance. They install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting. All blowers have a totally enclosed motor enclosure, which can be used in dirty, dusty, and wet environments.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water.
    With Round Outlet and Round Inlet—Totally Enclosed Motor Enclosure
    Image of Product. Front orientation. Blowers. High-Output Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    280 ft³/min @ 5 in. H₂O
    400 ft³/min @ 3 in. H₂O    		70 dBA @ 15 ft.3,4503/44"5"10 1/4"17 1/16"14 11/16"14 11/16"708.0 amp/4.0 amp-10 to 150AluminumNo7/16"0000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    280 ft³/min @ 5 in. H₂O
    400 ft³/min @ 3 in. H₂O    		70 dBA @ 15 ft.3,4503/44"5"10 1/4"17 1/16"14 11/16"14 11/16"692.2 amp/1.1 amp-10 to 150AluminumNo7/16"000000000000000
     

    High-Output Hazardous Location Spark-Resistant Blowers

    Powerful and durable, these blowers are able to blow air through larger systems that have more airflow resistance than standard hazardous location spark-resistant blowers can handle. They have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet
    Image of Product. Front orientation. Blowers. High-Output Hazardous Location Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Wt.,
    lb.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Hazardous Location Rating
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    400 ft³/min @ 3 in. H₂O70 dBA @ 15 ft.3,4503/44"5"10 1/4"17 1/16"14 11/16"17 3/16"7610.4 amp/5.2 amp-10 to 150AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups F, G
    		No7/16"00000000000000000
     
    230V AC/460V AC
     
    Three Phase—Hardwire
    400 ft³/min @ 3 in. H₂O70 dBA @ 15 ft.3,4503/44"5"10 1/4"17 1/16"14 11/16"17 3/16"692.3 amp/1.2 amp-10 to 150AluminumNEC Class I Divisions 1, 2 Groups C, D
    NEC Class II Divisions 1, 2 Groups F, G
    		No7/16"0000000000000000
     

    Hazardous Location Spark-Resistant Blowers

    These blowers have an explosion-proof motor that is UL listed for hazardous locations. They also have an aluminum housing for spark resistance. These blowers install in ductwork similar to duct fans, but are for use where high static pressures are present. Use them for equipment cooling, material conveying, drying, ventilating, and exhausting.
    Note: Airflow depends on the resistance created by ductwork. This resistance, known as static pressure (SP), is measured in inches of water. It is the responsibility of users in California to follow local energy efficiency regulations. Operating these blowers at a high airflow may violate these regulations.
    With Round Outlet and Round Inlet
    Image of Product. Front orientation. Blowers. Hazardous Location Spark-Resistant Blowers.
    Overall
    Mounting
    Airflow @ SP
    Volume (Sound)
    @ Distance
    Motor Speed,
    rpm
    Power,
    hp
    Outlet
    Dia.
    Inlet
    Dia.
    Wheel
    Dia.
    Ht.
    Wd.
    Dp.
    Current
    Temp. Range,
    ° F
    Housing
    Material
    Hazardous Location Rating
    Enclosure
    Rating
    Fasteners
    Included
    Hole
    Dia.
    Each
    120V AC/230V AC
     
    Single Phase—Hardwire
    320 ft³/min @ 1 in. H₂O
    375 ft³/min @ 1/4 in. H₂O    		60 dBA @ 15 ft.3,4501/34"5"4 3/4"12 5/8"9 7/8"12 1/4"7.0 amp/3.5 amp0 to 150AluminumNEC Class I Divisions 1, 2 Group D
    NEC Class II Divisions 1, 2 Groups F, G
    		IP44
    		No7/16"0000000000000000
     
    back to top