Blue Spring Steel | McMaster-Carr

Filter by

Thickness

Width

Length

Shape

Material

Heat Treatment

Hardness Rating

Hardness

Rockwell C48 to Rockwell C51

Fabrication

Yield Strength

Performance

Specifications Met

DFARS Specialty Metals

Exempt

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

REACH

RoHS

Export Control Classification Number (ECCN)

Elongation

Maximum Hardness After Heat Treatment

735 Products

About Steel

Compare over 50 grades of steel and cast iron to find the right material for you—all with material certificates for traceability.

Performance

High Strength

Yield strength between 25,000 and 65,999 psi

169 products

Wear Resistant

Resist abrasion, but may wear down from frequent use with hard material

566 products

Performance

Formable

Bend and shape into parts without cracking

139 products

Application

Multipurpose

Versatile for a wide range of uses

36 products

Wear-Resistant 1095 Spring Steel Strips

Also known as blue-tempered steel, this 1095 spring steel has a higher carbon content than 1075 spring steel for better wear resistance. It’s often used for spring clips, washers, and other parts that are under continual stress. These sheets and strips are hardened for increased abrasion and impact resistance.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg., ft.	Fabrication	Heat Treatment	Yield Strength	Hardness	Mechanical Finish	Specs. Met		Each
0.002" Thick (-0.0002" to 0.0002" Tolerance)



		3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K1	000000


		3/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K1	000000
		1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K427	00000
		1"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K2	000000
		2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K113	00000
		2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K3	000000
		3"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K383	00000
		3"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K4	000000


		0.003" Thick (-0.0003" to 0.0003" Tolerance)



				1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K428	00000


				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K57	000000
				1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K2	00000
				1"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K5	000000
				2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K3	00000
				2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K117	000000
				3"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K115	00000
				3"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K6	000000


				0.004" Thick (-0.0004" to 0.0004" Tolerance)



						1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K4	00000


						1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K7	000000
						1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K978	00000
						2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K6	00000
						2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K9	000000
						4"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K119	00000
						4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K101	000000
						6"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K121	00000
						6"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K72	00000


						0.005" Thick (-0.001" to 0.001" Tolerance)



								1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K7	00000


								1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K73	00000
								3/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K8	00000
								3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K74	00000
								1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K9	00000
								1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K75	000000
								3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K21	00000
								3/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K76	000000
								1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K11	00000
								1"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K77	000000
1 1/2"								10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K12	00000


1 1/2"	100							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K78	000000
2"	5							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K13	00000
2"	50							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K79	000000
3"	5							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K387	00000
3"	25							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K81	00000
6"	2							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K128	00000
6"	10							Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K82	00000


0.006" Thick (-0.0004" to 0.0004" Tolerance)



								1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K945	00000


		1/4"	100					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K946	00000
		1/2"	25					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K947	00000
		1/2"	100					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K948	00000
		1"	10					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K949	00000
		1"	100					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K951	000000
		3"	5					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K952	00000
		3"	25					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K953	00000
		6"	5					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K954	00000
		6"	25					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K955	000000


		0.007" Thick (-0.0004" to 0.0004" Tolerance)



				1/4"				25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K956	00000


				1/4"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K957	00000
				1/2"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K958	00000
				1/2"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K959	00000
				1"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K961	00000
				1"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K962	000000
				3"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K963	00000
				3"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K964	000000
				6"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K965	00000
				6"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K966	000000


				0.008" Thick (-0.001" to 0.001" Tolerance)



						1/4"		25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K27	00000


						1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K98	00000
						3/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K28	00000
						3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K99	000000
						1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K458	00000
						1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K741	000000
						3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K29	00000
						3/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K742	000000
						1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K31	00000
						1"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K743	000000
						2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K32	00000


						2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K491	000000
						3"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K153	00000
						3"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K744	000000
						6"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K154	00000
						6"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K758	000000
						12"	20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K938	000000


						0.01" Thick (-0.001" to 0.001" Tolerance)



	1/4"						25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K33	00000


	1/4"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K745	00000
	3/8"						25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K34	00000
	3/8"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K746	000000
	1/2"						25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K35	00000
	1/2"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K747	000000
	5/8"						25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K36	00000
	5/8"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K748	000000
	3/4"						25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K37	00000
	3/4"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K749	000000
	7/8"						10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K38	00000


	7/8"						100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K751	000000
	1"	10					Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K39	00000
	1"	100	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K752	000000
	1 1/4"	10	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K41	00000
	1 1/4"	100	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K753	000000
	1 1/2"	10	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K396	00000
	1 1/2"	75	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K667	000000
	2"	10	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K164	00000
	2"	75	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K165	000000
	2 1/2"	5	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K42	00000


	2 1/2"	50	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K754	000000
	3"	5	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K43	00000
	3"	50	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K167	000000
	4"	5	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K167	00000
	4"	25	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K755	000000
	6"	4	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K168	00000
	6"	25	Cold Worked				Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K169	000000
	8"	3	Cold Worked	Hardened			Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K169	00000
	8"	25	Cold Worked	Hardened	Not Rated		Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K492	000000
	10"	3	Cold Worked	Hardened	Not Rated		Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K171	00000


	10"	20	Cold Worked	Hardened	Not Rated		Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K756	000000
	12 3/8"	2	Cold Worked	Hardened	Not Rated		Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K11	00000
	12 3/8"	20	Cold Worked	Hardened	Not Rated		Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K759	000000


	0.012" Thick (-0.001" to 0.001" Tolerance)



			3/16"	25	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K44	00000


			3/16"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K761	00000
			1/4"	25	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K45	00000
			1/4"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K762	00000
			3/8"	25	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K46	00000
			3/8"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K763	000000
			1/2"	25	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K47	00000
			1/2"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K764	000000
			3/4"	25	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K432	00000
			3/4"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K765	000000
			1"	10	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K48	00000


1"			100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K766	000000
2"			10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K179	00000
2"			50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K767	000000
3"			5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K49	00000
3"			50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K768	000000
4"			5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K181	00000
4"			25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K769	000000
6"			3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K182	00000
6"			25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K493	000000
8"			3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K183	00000


8"			20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K771	000000
10"			3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K184	00000
10"			20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K494	000000
12 3/8"			3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K185	00000
12 3/8"			20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K495	000000


0.015" Thick (-0.001" to 0.001" Tolerance)



				1/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K51	00000


				1/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K772	00000
				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K52	00000
				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K773	00000
				5/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K53	00000
				5/16"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K774	000000
				3/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K54	00000
				3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K775	000000
				1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K55	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K776	000000
				5/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K192	00000


				5/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K777	000000
				3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K56	00000
				3/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K778	000000
				1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K57	00000
				1"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K779	000000
				1 1/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K58	00000
				1 1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K496	000000
				1 1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K59	00000
				1 1/2"	75	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K781	000000
	2"			10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K433	00000


	2"	50		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K782	000000
	3"	5		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K61	00000
	3"	50		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K783	000000
	4"	4		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K199	00000
	4"	25		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K784	000000
	6"	3		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K201	00000
	6"	20		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K785	000000
	8"	2		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K202	00000
	8"	10		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K786	00000
	10"	2		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K203	00000


	10"	10		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K787	00000
	12 3/8"	2		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K12	00000
	12 3/8"	10		Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K497	000000


	0.016" Thick (-0.001" to 0.001" Tolerance)



				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K62	00000


				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K788	000000
				1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K63	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K789	000000
				5/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K434	00000
				5/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K791	000000
				3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K64	00000
				3/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K792	000000
				1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K65	00000
				1"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K793	000000
				1 1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K211	00000


1 1/2"			75	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K794	000000
3"			6	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K212	00000
3"			25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K795	00000
6"			3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K976	00000
6"			20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K977	000000
8"			1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K991	00000
8"			10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K796	00000
12 3/8"			1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K992	00000
12 3/8"			10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K798	000000


0.018" Thick (-0.001" to 0.001" Tolerance)



				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K967	00000


				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K968	00000
				1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K969	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K971	00000
				1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K972	00000
				1"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K973	000000
				3"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K974	00000
				3"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K975	00000


				0.02" Thick (-0.001" to 0.001" Tolerance)



						1/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K73	00000


						1/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K809	00000
						1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K74	00000
						1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K873	00000
						5/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K75	00000
						5/16"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K812	00000
						3/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K76	00000
						3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K813	00000
						1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K77	00000
						1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K814	000000
						5/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K78	00000


						5/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K815	000000
	3/4"					10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K79	00000
	3/4"	100				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K816	000000
	1"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K81	00000
	1"	100				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K217	000000
	1 1/2"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K237	00000
	1 1/2"	50				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K817	000000
	2"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K82	00000
	2"	50				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K818	00000
	3"	5				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K239	00000


	3"	25				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K819	00000
	4"	4				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K241	00000
	4"	25				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K874	000000
	6"	3				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K242	00000
	6"	20				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K499	000000
	8"	2				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K243	00000
	8"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K822	00000
	10"	2				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K244	00000
	10"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K25	000000
	12"	10				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K939	000000


	12 3/8"	2				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K13	00000
	12 3/8"	6				Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K528	000000


	0.025" Thick (-0.001" to 0.001" Tolerance)



		1/4"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K93	00000


		1/4"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K831	00000
		5/16"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K94	00000
		5/16"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K832	00000
		3/8"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K437	00000
		3/8"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K833	000000
		1/2"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K95	00000
		1/2"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K834	000000
		5/8"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K96	00000
		5/8"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K835	000000
		3/4"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K97	00000


		3/4"	100	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K836	000000
		7/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K98	00000
		7/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K837	000000
		1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K99	00000
		1"	75	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K838	000000
		1 1/4"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K101	00000
		1 1/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K839	00000
		1 1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K102	00000
		1 1/2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K841	00000
		2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K103	00000


		2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K842	000000
		3"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K272	00000
		3"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K843	00000
		4"	3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K273	00000
		4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K844	00000
		6"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K274	00000
		6"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K931	00000
		8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K275	00000
		8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K845	000000
		10"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K276	00000


		10"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K503	000000
		12 3/8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K14	00000
		12 3/8"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K546	000000


		0.028" Thick (-0.001" to 0.001" Tolerance)



				1/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K104	00000


				1/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K846	00000
				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K105	00000
				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K847	00000
				3/8"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K106	00000
				3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K848	000000
				1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K107	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K849	000000
				5/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K108	00000
				5/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K851	000000
				3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K109	00000


3/4"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K852	000000
1"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K284	00000
1"	75			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K252	000000
2"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K401	00000
2"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K853	000000
3"	4			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K286	00000
3"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K854	000000
6"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K287	00000
6"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K855	00000
8"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K288	00000


8"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K856	000000
10"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K289	00000
10"	9			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K33	000000


0.03" Thick (-0.002" to 0.002" Tolerance)



				2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K932	00000


				2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K933	000000
				6"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K291	00000
				6"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K857	00000
				8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K292	00000
				8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K858	000000
				10"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K293	00000
				10"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K504	000000
				12"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K941	000000
				12 3/8"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K294	00000
				12 3/8"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K561	00000


				0.032" Thick (-0.002" to 0.002" Tolerance)



						3/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K402	00000


						3/16"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K859	00000
						1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K403	00000
						1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K861	00000
						5/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K438	00000
		5/16"				100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K862	00000
		3/8"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K439	00000
		3/8"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K863	000000
		1/2"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K451	00000
		1/2"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K864	000000
		5/8"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K404	00000


		5/8"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K573	000000
		3/4"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K405	00000
		3/4"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K865	000000
		1"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K302	00000
		1"	50			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K866	00000
		1 1/4"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K452	00000
		1 1/4"	50			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K867	00000
		1 1/2"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K406	00000
		1 1/2"	50			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K868	00000
		2"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K305	00000


		2"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K869	000000
		2 1/2"	3			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K394	00000
		2 1/2"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K673	000000
		3"	4			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K306	00000
		3"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K871	000000
		4"	3			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K307	00000
		4"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K505	000000
		6"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K308	00000
		6"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K507	00000
		8"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K309	00000


		8"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K872	000000
		10"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K311	00000
		10"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K506	000000
12 3/8"		2	Cold Worked			Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K15	00000
12 3/8"	5	Cold Worked	Hardened			Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K577	00000


0.035" Thick (-0.002" to 0.002" Tolerance)



		1/4"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K407	00000


		1/4"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K875	00000
		3/8"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K408	00000
		3/8"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K876	000000
		1/2"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K409	00000
		1/2"	100			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K877	000000
		3/4"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K411	00000
		3/4"	75			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K878	00000
		1"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K453	00000
		1"	50			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K879	00000
		1 1/2"	5	Cold Worked		Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K412	00000


		1 1/2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K881	00000
		2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K319	00000
		2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K882	000000
		3"	3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K321	00000
		3"	20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K883	000000
		6"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K322	00000
		6"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K884	00000
		8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K323	00000
		8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K512	000000
		10"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K324	00000


		10"	7	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K41	000000
		12 3/8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K16	00000
		12 3/8"	7	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K53	000000


		0.042" Thick (-0.002" to 0.002" Tolerance)



				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K413	00000


				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K885	00000
				3/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K414	00000
				3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K886	000000
				1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K415	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K887	000000
				5/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K416	00000
				5/8"	75	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K691	000000
				3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K331	00000
				3/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K889	00000
				1"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K417	00000


				1"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K891	00000
				1 1/4"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K418	00000
				1 1/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K892	00000
				1 1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K334	00000
				1 1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K893	00000
				2"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K335	00000
				2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K894	000000
				3"	3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K336	00000
				3"	20	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K895	000000
				4"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K337	00000


4"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K896	00000
6"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K338	00000
6"	9			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K292	00000
8"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K339	00000
8"	7			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K42	000000
10"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K341	00000
10"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K43	000000
12 3/8"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K17	00000
12 3/8"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K54	000000


0.05" Thick (-0.002" to 0.002" Tolerance)



				3/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K343	00000


				3/16"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K897	00000
				1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K454	00000
				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K898	00000
				3/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K419	00000
				3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K899	000000
				1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K421	00000
				1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K901	000000
				5/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K347	00000
				5/8"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K902	00000
				3/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K455	00000


				3/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K903	000000
				1"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K422	00000
				1"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K904	000000
				1 1/4"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K351	00000
				1 1/4"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K905	00000
		1 1/2"		4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K352	00000
		1 1/2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K906	000000
		2"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K353	00000
		2"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K301	000000
		3"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K354	00000


		3"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K907	00000
		4"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K355	00000
		4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K908	00000
		6"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K356	00000
		6"	7 1/2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K304	000000
		8"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K357	00000
		8"	6	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K44	000000
		10"	1	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K358	00000
		10"	4	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K45	000000
		12 3/8"	2	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K18	00000


		12 3/8"	3	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K611	000000


		0.062" Thick (-0.002" to 0.002" Tolerance)



				3/16"	25	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K456	00000


				1/4"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K423	00000
				1/4"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K911	000000
				3/8"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K424	00000
				3/8"	100	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K912	000000
				1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K364	00000
				1/2"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K913	00000
				5/8"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K425	00000
				5/8"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K914	000000
				3/4"	5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K426	00000
				3/4"	50	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K915	000000


1"				5	Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K367	00000
1"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K916	00000
1 1/4"	4			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K368	00000
1 1/4"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K917	000000
1 1/2"	4			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K369	00000
1 1/2"	25			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K309	000000
1 3/4"	3			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K395	00000
1 3/4"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K674	000000
2"	3			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K371	00000
2"	20			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K311	000000


2 1/2"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K372	00000
2 1/2"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K918	00000
3"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K373	00000
3"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K919	00000
4"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K374	00000
4"	7			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K628	000000
6"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K375	00000
6"	6 1/2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K313	000000
8"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K376	00000
8"	5			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K473	000000


10"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K377	00000
10"	3 1/2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K475	000000
10"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K936	000000
12"	10			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9036K937	000000
12 3/8"	1			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9075K378	00000
12 3/8"	2			Cold Worked	Hardened	Not Rated	Rockwell C48 to Rockwell C51 (Extra Hard)	Polished	ASTM A684	9072K19	00000

Formable 1095 Spring Steel Sheets

These sheets are annealed to soften their temper, so they can be formed into shape and then heat treated for spring properties. They’re made from 1095 spring steel, which is more wear resistant than 1075 spring steel because of its higher carbon content. These sheets are often made into parts that will be used under continual stress, such as spring clips and washers.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg.	Fabrication	Heat Treatment	Yield Strength	Hardness	Max. Hardness After Heat Treatment	Specs. Met		Each
0.015" Thick (-0.002" to 0.002" Tolerance)



		3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K611	000000


		8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K668	00000
		8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K675	00000


		0.015" Thick (-0.001" to 0.001" Tolerance)



				24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B88 (Medium)	Not Rated	ASTM A684	9043K115	00000


				24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B88 (Medium)	Not Rated	ASTM A684	9043K116	00000


				0.02" Thick (-0.002" to 0.002" Tolerance)



						3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K612	00000


						8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K669	00000
						8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K676	00000
						15"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K682	00000
						24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K631	00000
						24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K649	000000


						0.025" Thick (-0.002" to 0.002" Tolerance)



								3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K613	00000


								8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K42	00000
								8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K24	00000
								15"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K12	00000
								24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K632	00000
								24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K651	000000


								0.032" Thick (-0.002" to 0.002" Tolerance)



										3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K614	00000


										8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K43	00000
										8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K25	00000
										15"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K13	00000
										24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K633	00000
										24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K652	000000


										0.035" Thick (-0.002" to 0.002" Tolerance)



	3"										3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K615	00000


	8"										12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K44	00000
	8"										24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K26	00000
	15"										48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K14	00000
	24"										24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K634	00000
	24"										48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K653	000000


	0.042" Thick (-0.002" to 0.002" Tolerance)



			3"								3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K616	00000


			8"								12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K45	00000
			8"								24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K27	00000
			15"								48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K15	00000
			24"	24"							Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K635	00000
			24"	48"	Cold Worked						Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K654	000000


			0.05" Thick (-0.002" to 0.002" Tolerance)



					3"						3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K617	00000


					8"						12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K46	00000
					8"						24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K28	00000
					15"						48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K16	00000
					24"						24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K636	00000
					24"	48"					Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K655	000000


					0.062" Thick (-0.003" to 0.003" Tolerance)



							3"				3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K618	00000


							8"				12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K47	00000
							8"				24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K29	00000
							15"				48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K17	00000
							24"				24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K637	00000
							24"				48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K656	000000


							0.065" Thick (-0.002" to 0.002" Tolerance)



									3"		3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K619	00000


									8"		12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K671	00000
									24"		24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K638	00000
									24"		48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K657	000000


0.072" Thick (-0.003" to 0.003" Tolerance)



										3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K621	00000


										8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K48	00000
										8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K31	00000
										15"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K18	00000
										24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K639	00000
										24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K658	000000


	0.078" Thick (-0.002" to 0.002" Tolerance)



										3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K622	00000


										8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K672	00000
										8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K678	00000
										24"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K641	00000
										24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K659	000000


			0.083" Thick (-0.003" to 0.003" Tolerance)



										3"	3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K623	00000


										8"	12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K49	00000
										8"	24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K32	00000
										15"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K19	00000
										24"	48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K661	000000


										0.094" Thick (-0.003" to 0.003" Tolerance)



						8"					12"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K51	00000


						8"					24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K33	00000
						15"					48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K21	00000
						24"					24"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K643	00000
						24"					48"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K662	000000


						0.109" Thick (-0.003" to 0.003" Tolerance)



							3"					3"	Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K625	00000


							8"	12"				Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K52	00000
							8"	24"				Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K34	00000
							15"	48"				Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K22	000000
							24"	24"				Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K644	00000
							24"	48"				Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K663	000000


0.125" Thick (-0.003" to 0.003" Tolerance)



								3"	3"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K626	00000


								8"	12"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K53	00000
								8"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K35	00000
								15"	48"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K23	000000
								24"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K645	00000
								24"	48"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K664	000000


	0.134" Thick (-0.003" to 0.003" Tolerance)



								3"	3"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K627	00000


								8"	12"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K673	00000
								8"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K679	00000
								24"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K646	000000
								24"	48"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K665	000000


			0.156" Thick (-0.003" to 0.003" Tolerance)



								3"	3"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K628	00000


								8"	12"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K674	00000
								8"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K681	00000
								24"	24"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K647	000000
								24"	48"			Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K666	000000


								0.187" Thick (-0.003" to 0.003" Tolerance)



									3"	3"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K629	00000


									8"	12"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K57	00000
									8"	24"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K36	000000
									15"	48"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K37	000000
									24"	24"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K648	000000
									24"	48"		Cold Worked	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A684	9043K667	000000


						0.25" Thick (-0.008" to 0.008" Tolerance)



										8"	12"	Hot Rolled	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A830	9043K108	00000


										15"	48"	Hot Rolled	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A830	9043K109	000000
										24"	48"	Hot Rolled	Annealed	Not Rated	Rockwell B90 (Medium)	Not Rated	ASTM A830	9043K111	000000

High-Strength 1075 Spring Steel Strips

Create high-strength parts that compress and extend without losing shape, such as springs, shims, and clips. Also known as scaleless steel, this 1075 spring steel comes hardened for extra wear and fatigue resistance. However, you’ll need to cut it to shape since it’s too hard to form. For more complex shaping, consider annealed 1075 spring steel sheets, or 1050 for the tightest bends.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Wd.	Lg., ft.	Fabrication	Heat Treatment	Yield Strength	Hardness		Each
0.01" Thick (-0.001" to 0.001" Tolerance)



		1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K11	000000


		1"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K12	00000
		1"	75	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K112	00000
		2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K13	00000
		4"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K214	00000
		6"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K15	00000
		6"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K215	00000


		0.015" Thick (-0.001" to 0.001" Tolerance)



				1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K16	00000


				1"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K17	00000
				1"	50	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K217	00000
				2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K18	00000
				2"	25	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K218	00000
				4"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K219	00000
				6"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K221	00000


				0.018" Thick (-0.001" to 0.001" Tolerance)



						1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K22	00000


						1"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K23	00000
						2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K24	00000
						6"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K126	00000


						0.02" Thick (-0.001" to 0.001" Tolerance)



								1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K27	00000


								1/2"	100	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K127	00000
								1"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K28	00000
								1"	50	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K128	00000
								2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K29	00000
								2"	25	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K229	00000
								4"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K231	00000
								6"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K232	00000


								0.025" Thick (-0.001" to 0.001" Tolerance)



										1/2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K33	00000


1/2"										75	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K233	00000
1"	5									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K34	00000
1"	50									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K234	00000
2"	5									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K35	00000
2"	25									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K235	00000
6"	5									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K237	00000


0.032" Thick (-0.001" to 0.001" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K38	00000


										1/2"	50	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K238	00000
		1"								5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K39	00000
		1"	25							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K239	00000
		2"	10							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K241	00000
		4"	10							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K242	00000
		6"	5							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K243	00000


		0.035" Thick (-0.001" to 0.001" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K44	00000


										1/2"	50	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K244	00000
										1"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K45	00000
				1"						25	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K245	00000
				2"	10					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K246	00000
				4"	10					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K247	00000
				6"	5					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K248	00000


				0.042" Thick (-0.001" to 0.001" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K63	00000


						1"				25	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K632	00000
						2"	10			Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K633	00000
						3"	10			Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K634	00000
						4"	5			Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K635	00000
						6"	4			Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K636	00000


						0.05" Thick (-0.001" to 0.001" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K49	00000


										1"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K51	00000
										1"	25	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K251	00000
										2"	10	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K252	00000
								3"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K52	00000
								4"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K253	00000
								6"	4	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K154	00000


								0.062" Thick (-0.002" to 0.002" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K55	00000


1/2"	25									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K255	00000
1"	10									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K256	00000
2"	10									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K157	00000
3"	5									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K56	00000
4"	4									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K158	00000
6"	3									Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K159	00000


0.094" Thick (-0.002" to 0.002" Tolerance)



										1/2"	5	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K61	00000


		1/2"								100	Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K261	000000
		5/8"	5							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K62	00000
		3/4"	5							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K183	00000
		1"	4							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K184	00000
		1 1/4"	3							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K185	00000
		1 1/2"	3							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K186	00000
		1 1/2"	50							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K266	000000
		2"	2							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K187	00000
		2"	25							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K267	000000
		2 1/2"	2							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K188	00000


		2 1/2"	25							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K268	000000
		3"	1							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K189	00000
		3"	25							Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K269	000000
		4"	1	Cold Worked						Hardened	Not Rated	Rockwell C45 (Hard)	9074K191	00000
		4"	10	Cold Worked	Hardened					Not Rated	Rockwell C45 (Hard)	9074K271	000000
		5"	1	Cold Worked	Hardened					Not Rated	Rockwell C45 (Hard)	9074K192	00000
		5"	10	Cold Worked	Hardened					Not Rated	Rockwell C45 (Hard)	9074K272	000000


		1/8" Thick (-0.002" to 0.002" Tolerance)



				1/2"	5					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K193	00000


				3/4"	4					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K194	00000
				7/8"	3					Cold Worked	Hardened	Not Rated	Rockwell C45 (Hard)	9074K195	00000
				1"	3	Cold Worked				Hardened	Not Rated	Rockwell C45 (Hard)	9074K196	00000
				1 1/4"	2	Cold Worked	Hardened			Not Rated	Rockwell C45 (Hard)	9074K197	00000
				1 1/2"	2	Cold Worked	Hardened			Not Rated	Rockwell C45 (Hard)	9074K198	00000

High-Strength 1075 Spring Steel Sheets

Form high-strength springs, shims, and clips. 1075 spring steel is easier to shape than 1095 because it’s alloyed with less carbon. For more complex forming, consider 1050 spring steel instead. Once made into a part and heat treated, 1075 continues to hold its shape when compressed and extended, but not as well as 1095.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Lg.	Fabrication	Heat Treatment	Yield Strength, psi	Hardness	Max. Hardness After Heat Treatment	Specs. Met		Each
0.015" Thick (-0.003" to 0.003" Tolerance)



	8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K81	000000


	8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K82	00000


	0.02" Thick (-0.003" to 0.003" Tolerance)



			8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K83	00000


			8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K84	00000


			0.025" Thick (-0.003" to 0.003" Tolerance)



					8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K71	00000


					8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K41	00000
					15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K11	00000
					24"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K85	000000


					0.032" Thick (-0.003" to 0.003" Tolerance)



							8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K72	00000


							8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K42	00000
							15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K12	00000
							24"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K86	000000


							0.035" Thick (-0.003" to 0.003" Tolerance)



									8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K73	00000


									8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K43	00000
									15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K13	00000


									0.042" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K74	00000


											8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K44	00000
											15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K14	00000


0.05" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K55	00000


											8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K45	00000
											15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K15	000000


	0.062" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K56	00000


											8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K46	00000
											15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K16	000000


			0.072" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K57	00000


											8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K47	00000
											15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K17	000000


											0.083" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K58	00000


											8"	24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K48	00000
											15"	48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K18	000000


											0.094" Thick (-0.003" to 0.003" Tolerance)



								8"				12"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K59	00000


								8"				24"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K49	00000
								15"				48"	Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K19	000000


								0.109" Thick (-0.003" to 0.003" Tolerance)



									8"	12"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K61	00000


									8"	24"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K51	00000
									15"	48"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K21	000000


0.125" Thick (-0.003" to 0.003" Tolerance)



									8"	12"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K62	00000


									8"	24"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K52	00000
									15"	48"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K22	000000


	0.187" Thick (-0.003" to 0.003" Tolerance)



									8"	12"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K63	00000


									8"	24"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K53	000000
									15"	48"			Cold Worked	Annealed	50,000	Rockwell B90 (Medium)	Rockwell C64	ASTM A684	9071K23	000000

Multipurpose Formable 1050 Spring Steel Sheets

Containing more carbon than low-carbon steel—but less than 1095 spring steel—1050 spring steel is easily formed into parts such as washers, brackets, and springs before being hardened for use. It resists stress, so it won’t snap when formed or twisted. Because it has a lower carbon content than 1095 spring steel, it’s not as wear resistant.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

	Lg.	Fabrication	Heat Treatment	Yield Strength, psi	Hardness	Max. Hardness After Heat Treatment	Specs. Met		Each
0.025" Thick (-0.003" to 0.003" Tolerance)



	8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N11	000000


	8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N12	00000
	15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N13	00000


	0.032" Thick (-0.003" to 0.003" Tolerance)



			8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N21	00000


			8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N22	00000
			15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N23	00000


			0.035" Thick (-0.003" to 0.003" Tolerance)



					8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N31	00000


					8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N32	00000
					15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N33	00000


					0.042" Thick (-0.003" to 0.003" Tolerance)



							8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N41	00000


							8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N42	00000
							15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N43	00000


							0.05" Thick (-0.003" to 0.003" Tolerance)



									8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N51	00000


									8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N52	00000
									15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N53	00000


									0.062" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N61	00000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N62	00000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N63	00000


0.072" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N71	00000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N72	00000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N73	00000


	0.083" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N81	00000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N82	00000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N83	00000


											0.094" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N91	00000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N92	000000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N93	000000


											0.109" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N111	00000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N112	000000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N113	000000


											1/8" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N114	000000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N115	000000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N116	000000


											0.187" Thick (-0.003" to 0.003" Tolerance)



											8"	12"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N117	000000


											8"	24"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N118	000000
											15"	48"	Cold Worked	Annealed	38,000	Rockwell B74	Rockwell C58	ASTM A682, ASTM A684	5582N119	000000