A spring-loaded toggle holds against the back of the material.

Bolts are beveled under the head for use in countersunk holes.

Use these stud-style anchors with nuts.

Use these stud-style anchors with nuts.

Easy to install, tap these anchors in like a nail—no drilled hole required.

These steel anchors are available with corrosion-resistant finishes.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

The removable flat head provides a flush finish in countersunk holes.

These 18-8 stainless steel anchors have good chemical resistance.

A zinc plating provides corrosion resistance in wet environments.

These 18-8 stainless steel anchors have good chemical resistance.

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Install like a stud anchor—just thread the anchor, a nut, and a washer onto the end of a threaded rod, drive into a hole, and turn the nut to expand the base. Also known as rod anchors, they're often used with threaded rod to hang pipe and wiring.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

Drive these tools with a hammer to expand anchors.

Bolts are beveled under the head for a flush finish in countersunk holes.

Use in applications requiring high strength.

A tamper-resistant nut prevents unwanted removal of the object you are anchoring.

These anchors are also known as drive rivets. To install, hammer the screw into the body. Unthread the screw to remove.

A zinc plating provides corrosion resistance in wet environments.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

Also known as mungo anchors, these have large fins that prevent rotation.

These stud-style anchors include a nut and a washer.

For narrow holes and small cavities where toggle anchors won't fit.

These steel anchors are available with corrosion-resistant finishes.

18-8 stainless steel anchors have good chemical resistance.

Also known as Tapcons, use these screws in applications requiring high strength.

These 410 stainless steel screws are more corrosion resistant than ultra-corrosion-resistant coated steel screws.

These 410 stainless steel screws are more corrosion resistant than ultra-corrosion-resistant coated steel screws.

Wedge these hangers in concrete and other solid materials.

These hangers are a popular choice for overhead applications.

These hangers have internal threads for use with threaded rods, bolts, and anchors.

About half the strength of medium-strength bolts, these bolts are for light duty work-holding.

A wing-like toggle holds against the back of the material and spreads the force over a large area to hold 30 lbs. or more.

18-8 stainless steel studs have good chemical resistance and may be mildly magnetic. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.

A hollow center allows these studs to be used as an axle, a vent, or a passageway for wiring.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

These bits allow you to easily switch to another size by changing only the bit body. They are hollow and cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Also known as A-taper bits, these fit rotary hammers with a taper-shank chuck.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

These hollow bits cut with their outside edge for drilling holes larger than 1 1/2" in diameter.

Drill holes up to 1 1/2" in diameter.

The SDS-Max shank has three deep slots and two shallow slots for use with SDS-Max-drive rotary hammers.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

A more controlled chip removal reduces heat buildup. Use these bits on brittle materials such as block and brick.