Mount components onto food processing lines, walls, and sanitary equipment while leaving space to clean in between. The smooth finish and rounded edges eliminate pits or crevices where bacteria could grow. These standoffs stand up to hard cleaners and detergents and won't corrode from frequent washdowns. A rubber seal stops water and contaminants from entering the body of these standoffs. They are FDA compliant for safe contact with food.

Connect male- and female-threaded parts of different thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through. Attach your parts to these adapters and use a hex key to secure the connection. Made of 304 stainless steel, all will hold up in wet environments. O-rings on each side create a tight seal, making them good for vacuum and compressed-air applications.

Join two female-threaded parts of various thread types and sizes, while allowing air, liquids, wire, or other thin materials to pass through. Attach your parts to these adapters and use a hex key to secure the connection. Made of 304 stainless steel, all will hold up in wet environments. O-rings on each side create a tight seal, making them good for vacuum and compressed-air applications.

Adapters are brass, which has good strength and corrosion resistance.

Screw these clamps directly into a tapped hole and use air pressure to quickly and consistently clamp and release parts when welding. Compact and lightweight, these clamps are easy to move and reposition when welding. They’re also known as swing clamps. Connect these clamps to a control valve and air line. When pressure is applied, the arm on these clamps rotates 90° into position over your workpiece before clamping down. When pressure is released, the arm rises and rotates out of the way, so you can load or unload parts.

Replacement Arms—Replacement arms (sold separately) do not include a holding screw. Extended arms (sold separately) give your clamp a longer reach than standard arms. However, you’ll have to use lower pressure, which means the actual clamping force will be lower than the clamp’s listed rating.

Connect these tools to your shop air to quickly install and remove fasteners. With fewer moving parts than battery-powered screwdrivers, these are less likely to overheat when used continuously. They also operate at higher speeds than battery-powered screwdrivers, so they're great for production lines and other high-volume jobs when you're on a time crunch.

Compact and lightweight, these clamps are easy to move and reposition when welding. Adjust the air pressure to quickly and consistently clamp or release parts. When pressure is applied, the arm on these clamps rotates 90° into position over your workpiece before clamping down. When pressure is released, the arm rises and rotates out of the way, so you can load or unload parts. They’re also known as swing clamps. Attach a sensor (not included) to activate relays and controllers. Connect their ports to a control valve and an air line. Use screws (not included) to mount the base to a flat surface.

All clamps come with a holding screw.

Replacement Arms—Replacement arms (sold separately) do not include a holding screw. Extended arms (sold separately) give your clamp a longer reach than standard arms. However, you’ll have to use lower pressure, which means the actual clamping force will be lower than the clamp’s listed rating.

Arm Adapters—Add an arm adapter to mount your own custom-machined arm.