Filter by
System of Measurement
Capacity
Maximum Temperature
Width
Lid Material
Lid Type
Handle Material
Clarity
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Faucet Spout OD
Faucet Material
Mouth ID
Plastic Jars
 |
Style P |
Store liquids or solids.
Style P
|
Style P have durable, thick walls.
Mouth | Lid | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Capacity | Dia. | Ht. | OD | ID | Color | Type | Material | Color | Autoclavable | Max. Temp., ° F | Each | |||
Polypropylene | ||||||||||||||
Silicone Rubber Seal | ||||||||||||||
| 2 gal. / 7,575 ml | 7 1/2" | 13 1/8" | 2 3/4" | 2 1/4" | Semi-Clear White | Threaded | Polypropylene | Semi-Clear White | Yes | 250 | 4322T7 | 000000 | ||
Carboys
Carboys with Faucet
 |
Style D |
Dispense liquids hands-free with the built-in faucet on these carboys. Choose a seal material based on the chemicals being dispensed. PTFE and Viton® seals resist a broad range of aggressive solvents and acids, outperforming Buna-N and LDPE seals in chemical resistance. Silicone rubber or EPDM seals suit general-purpose lab use where extreme chemical resistance is not required.
Beverage Coolers
Drinking Water
 |
Top Handle |
Mounting Brackets—Drinking water coolers can be paired with a mounting bracket to place them on a vehicle or wall. The mounting bracket has a strap to secure the cooler.
Coolers | Mounting Brackets | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lid | |||||||||||||
Cap., gal. | Dia. | Ht. | Material | Color | Type | Color | Handle Location | Faucet Type | Each | Each | |||
| 2 | 11 1/2" | 15" | Plastic | Yellow | Tight Fitting | Red | Top | Push Button | 5616T11 | 000000 | 5554T55 | 0000000 | |
 |
Padlock Sold Separately |
Add a lock to prevent tampering and cross-contamination. It also keeps the lid from jostling loose in the case of a fall.
Open Lg. | Closed Lg. | Overall Wd. | For Max. No. of Padlocks | For Max. Padlock Shackle Dia. | Label Included | Material | Color | Mounting Fasteners Included | Each | ||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 6 1/2" | 3" | 2" | 1 | 5/16" | No | Plastic | White | Yes | 5616T101 | 000000 |
Plastic Hand-Pump Sprayers
 |  |
Style A | Style B |
 |  |
Style C | Style F |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. Made of lightweight plastic, the tank on these sprayers resists chemicals and impact. They’re often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Warning: Face the nozzle away from you to safely release pressure from the relief valve. If there’s no relief valve, place the tank on its side with the top pointed away from you before you release.
Cone Dispensing—Sprayers with a cone nozzle are good for everyday cleaning.
Flat Dispensing—The flat nozzle is useful for creating powerful coverage over a wide area.
Mist Dispensing—To clean delicate equipment or cool machinery, use the mist nozzle.
Stream Dispensing—Remove stuck-on material with the stream nozzle.
Viton® Fluoroelastomer Seal—Viton® fluoroelastomer seals are chemical resistant, so you can spray oils, acids, and solvents without damaging the seal.
Polypropylene—Polypropylene wands resist most chemicals. They are lighter than stainless steel but are less durable.
Stainless Steel—Stainless steel wands resist most chemicals.
Aluminum—Aluminum wands are durable but can corrode when exposed to strong chemicals.
Internal Pressure Regulator—Sprayers with an internal pressure regulator keep pressure at or below 55 psi.
Pressure-Relief Valve—Sprayers with a pressure-relief valve let you release the air inside safely without being sprayed.
Repair Kits—Add a repair kit to replace worn or damaged components, such as the check valve or O-rings.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Stream Dispensing | |||||||||||||||||||||
| A | 2 | 7" | 19" | Polyethylene | Buna-N | Polypropylene | White | 40" | 12" | 4 1/2" | 1/2 gal. 1 gal. 1 1/2 gal. 2 L 4 L 6 L | Continuous Spray, Internal Pressure Regulator, Reinforced Hose | — | 6878N321 | 000000 | 6878N317 | 000000 | 6878N912 | 000000 | ||
| A | 2 | 8 1/2" | 21" | Polyethylene | Buna-N | Aluminum | White | 36" | 18" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Reinforced Hose | — | 6878N348 | 00000 | 6878N343 | 0000 | 6878N917 | 0000 | ||
Mist/Stream Dispensing | |||||||||||||||||||||
| B | 2 | 8 11/16" | 18 3/4" | Polyethylene | Buna-N | Polypropylene | White | 36" | 14" | 1 3/4" | — | Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | — | 6878N331 | 00000 | ——— | 0 | ——— | 0 | ||
Cone/Flat/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 5/8" | 17 3/8" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 18" | 2" | — | Continuous Spray, Pressure-Relief Valve | Shoulder Strap | 7095T42 | 00000 | 7095T91 | 00000 | 1356N21 | 00000 | ||
Cone/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 5/8" | 17 3/8" | Polyethylene | Viton® Fluoroelastomer | Stainless Steel | White | 50" | 21" | 2" | 1/2 gal. 1 gal. 1 L | Continuous Spray, Filter, Pressure-Relief Valve | Shoulder Strap | 6878N345 | 00000 | 6878N344 | 00000 | 6878N919 | 00000 | ||
| F | 2 | 8 1/8" | 22 7/8" | Polyethylene | Buna-N | Polypropylene | White | 34" | 18" | 3" | 1/2 gal. 2 L | Continuous Spray, Extended Handle, Filter, Pressure-Relief Valve, Reinforced Hose, Wand Holder | — | 6878N18 | 00000 | 6878N101 | 00000 | 6878N103 | 00000 | ||
Flat/Mist/Stream Dispensing | |||||||||||||||||||||
| C | 2 | 8 1/2" | 21" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | White | 50" | 21" | 2" | — | Carrying Handle, Continuous Spray, Filter, Pressure-Relief Valve, Reinforced Hose | Shoulder Strap | 6878N326 | 00000 | ——— | 0 | ——— | 0 | ||
Hand-Pump Foamers
 |
The nozzle on this foamer injects air to make cleaners and disinfectants foam. It can also be used as a sprayer.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure that the tank, seal, wand, and nozzle are suitable for your application.
Continuous Spray—The trigger locks for continuous spraying.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
Foamers | Repair Kits | Replacement Trigger and Wand Kits | |||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Nozzle Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Graduations | Features | Includes | Each | Each | Each | |||||
Cone/Flat/Foam/Stream Dispensing | |||||||||||||||||||||
| 2 | 9" | 20 1/2" | Polyethylene | Viton® Fluoroelastomer | Stainless Steel | Polypropylene | Semi-Clear White | 50" | 21" | 2" | 1/2 gal. 2 L | Continuous Spray, Pressure-Relief Valve, Wand Holder | Four Spray Nozzles, One Foam Nozzle, Shoulder Strap | 1356N11 | 000000 | 1356N22 | 000000 | 1356N21 | 000000 | ||
Heavy Duty Plastic Hand-Pump Sprayers
 |
These sprayers have a more durable construction than our other plastic hand-pump sprayers. They have a large fill opening for easy filling and cleaning. Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. They are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides. They have a trigger that can be locked for continuous spray.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Replacement Trigger and Wand Kits—Replacement trigger and wand kits do not include nozzles.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Clarity | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Each | Each | Each | |||||
Cone/Mist/Stream Dispensing | ||||||||||||||||||
| 2 | 7 3/4" | 19 1/4" | Polyethylene | Viton® Fluoroelastomer | Polypropylene | Opaque | Black | 42" | 12" | 4" | 7095T53 | 0000000 | 7095T541 | 000000 | 7095T535 | 000000 | ||
Metal Hand-Pump Sprayers
 |  |
Style A | Style B |
Pump the handle to pressurize the tank, then squeeze the trigger on the wand to spray. These sprayers are often used for degreasers, insecticides, disinfectants, cleaning solutions, and herbicides.
Note: The material of the parts can affect a sprayer's compatibility with a chemical or solution. Make sure the tank, seal, wand, and nozzle are suitable for your application.
Style A—Style A sprayers have a trigger that locks for continuous spray.They also have a filter in the tank to prevent clogs.
Style B—Style B sprayers have a trigger that locks for continuous spray.
Sprayers | Repair Kits | Replacement Trigger and Wand Kits | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Cap., gal. | Dia. | Ht. | Tank Material | Seal Material | Wand Material | Nozzle Material | Color | Hose Lg. | Wand Lg. | Fill Opening Dia. | Features | Each | Each | Each | |||||
Mist/Stream Dispensing | ||||||||||||||||||||
| A | 2 | 8" | 18" | Epoxy-Coated Steel | Viton® Fluoroelastomer | Brass | Brass | Blue | 42" | 12" | 3" | Continuous Spray, Filter | 7558T52 | 0000000 | 7558T55 | 000000 | 7558T53 | 000000 | ||
Cone/Flat/Stream Dispensing | ||||||||||||||||||||
| B | 2 | 8" | 17 1/2" | Stainless Steel | Viton® Fluoroelastomer | Brass | Polypropylene | — | 40" | 12" | 5 1/4" | Continuous Spray | 7529T32 | 000000 | 7529T12 | 00000 | 7529T63 | 00000 | ||
