Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Snug-Hold Threaded-Rod-Mount Clamping Hangers
Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers and loop hangers. All have a threaded hole on top for mounting with threaded rod.
Epoxy coated iron hangers are corrosion resistant and can be used with copper tubing.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Thread Size  | Cap., lbs. | Lg. | Wd. | Ht. | Mounting Hole Dia. | Specifications Met | Each | |
Epoxy Coated Iron | ||||||||||
| 1/2" | 12 | 3/8"-16 | 180 | 1 11/16" | 9/16" | 1" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 000000 |
| 5/8" | 15 | 3/8"-16 | 180 | 1 3/4" | 9/16" | 1 1/4" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
| 7/8" | 22 | 3/8"-16 | 180 | 1 15/16" | 9/16" | 1 1/2" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
| 1 1/8" | 28 | 3/8"-16 | 180 | 2 1/4" | 9/16" | 1 13/16" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
| 1 3/8" | 34 | 3/8"-16 | 180 | 2 5/8" | 9/16" | 2" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
| 1 5/8" | 41 | 3/8"-16 | 180 | 2 15/16" | 9/16" | 2 1/4" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
| 2 1/8" | 53 | 3/8"-16 | 180 | 3 7/16" | 9/16" | 2 3/4" | 3/8" | Fed. Spec. WW-H-171E, Type 25; MSS-SP-58-2009, Type 12 | 0000000 | 00000 |
Self-Opening Hinged Lid Supports
No separate hinges are required, these supports act as a hinge and lid support all in one. Springs provide lifting assistance to raise and hold lids open—slightly lift the lid to get it started and the support will do the rest. Manually shut the lids and the supports will hold them in the closed position. Often used in overhead installations, these supports are designed for lids that open up from the side. All are rated for maximum lid weight—do not exceed the weight listed. They can be used individually but should be used in pairs for lids longer than 24". Mounting position is determined as you look into your cabinet or chest.
For technical drawings and 3-D models, click on a part number.
Min. Mounting | For Max. Lid Weight, lbs. | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dp. (A) | Clearance (B) | Lid Mounting Clearance (C) | For Lid Opening Angle | One Lid Support | Two Lid Supports | Material | Appearance | Color | Spring Material | Mounting Position | Hardware Included | Screw Size | No. of Holes | Each | |
Side Mount, Opens Up | |||||||||||||||
| 1.82" | 5.44" | 3.94" | 75°, 90° | 5 | 10 | Epoxy-Coated Steel | Dull | White | Nickel Steel | Left Side | No | M4, M5 | 2, 3 | 00000000 | 000000 |
| 1.82" | 5.44" | 3.94" | 75°, 90° | 5 | 10 | Epoxy-Coated Steel | Dull | White | Nickel Steel | Right Side | No | M4, M5 | 2, 3 | 00000000 | 00000 |