Filter by
Screw Size
Angle
Weight Capacity
Finish
Offset Length
DFARS Specialty Metals
Export Control Classification Number (ECCN)
Mounting Hole Diameter
Ring Style
Corner Machine Brackets
 |  |
With Two Mounting Slots | With Four Mounting Slots |
Made to meet tight dimensional tolerances for mounting applications on machines and automated equipment.
Lg., mm | Mounting | Each | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (C) | Lg. Tolerance, mm | Thk., mm | Thk. Tolerance, mm | Angle | Angle Tolerance | Corner Radius, mm | Flatness Tolerance, mm | Wt. Cap. | Mount Type | Fasteners Included | No. of Slots | For Screw Size | 1-19 | 20-Up | |||
Dull 6061 Aluminum | |||||||||||||||||||
| 35 | 30 | 30 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 90° | -1° to 1° | 3.2 | 0.38 | Not Rated | Screw On | No | 2 | M6 | 2313N52 | 00000 | 00000 | ||
| 80 | 40 | 50 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 90° | -1° to 1° | 3.2 | 0.38 | Not Rated | Screw On | No | 4 | M6 | 2313N57 | 00000 | 00000 | ||
Dull 316 Stainless Steel | |||||||||||||||||||
| 35 | 30 | 30 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 90° | -1° to 1° | 3.2 | 0.38 | Not Rated | Screw On | No | 2 | M6 | 2313N26 | 0000 | 0000 | ||
| 80 | 40 | 60 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 90° | -1° to 1° | 3.2 | 0.38 | Not Rated | Screw On | No | 4 | M6 | 2313N33 | 00000 | 00000 | ||
Standoff Brackets
 |  |
Mounting Fasteners Not Included |
Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.
Mounting Hole (A) | Mounting Hole (B) | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Wd. | Ht. | Thk. | Wd. | Lg. | Ctr.-to-Ctr. | Wd. | Lg. | Ctr.-to-Ctr. | No. of Mounting Holes | For Screw Size | Mounting Fasteners Included | Wt. Cap., lb. | Each | |||
Galvanized Steel | |||||||||||||||||
| 6 5/16" | 1 3/16" | 1 15/16" | 1/8" | 5/16" | 9/16" | 5 1/8" | 1/4" | 3" | — | 3 | 1/4", M6 | No | 110 | 2760N11 | 000000 | ||
| 8 1/4" | 1 3/16" | 1 15/16" | 1/8" | 5/16" | 9/16" | 7 1/16" | 1/4" | 2" | 3 1/8" | 4 | 1/4", M6 | No | 110 | 2760N12 | 00000 | ||
| 10 1/4" | 1 3/16" | 1 15/16" | 1/8" | 5/16" | 9/16" | 9 1/16" | 1/4" | 2 15/16" | 3 15/16" | 4 | 1/4", M6 | No | 110 | 2760N13 | 00000 | ||
Sensor and Switch Mounting Brackets
 |  |  |
Style 5 | Style 6 | Style 11 |
For Round Bodies
| |
Style 5 | Style 6 |
Lg., mm | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | For Sensor/Switch OD, mm | Material | (A) | (B) | (C) | Thk., mm | Fasteners Included | No. of Holes | For Screw Size | Each | ||
| 5 | 18 | 304 Stainless Steel | 38 | 25 | 39 | 3 | No | 2 | M6 | 55205K115 | 000000 | |
| 5 | 22 | 304 Stainless Steel | 38 | 25 | 39 | 3 | No | 2 | M6 | 55205K117 | 00000 | |
| 5 | 24 | 304 Stainless Steel | 38 | 25 | 39 | 3 | No | 2 | M6 | 55205K119 | 00000 | |
| 6 | 18 | 304 Stainless Steel | 38 | — | 58 | 3.1 | No | 2 | M6 | 55205K116 | 00000 | |
| 6 | 22 | 304 Stainless Steel | 38 | — | 58 | 3.1 | No | 2 | M6 | 55205K118 | 00000 | |
| 6 | 24 | 304 Stainless Steel | 38 | — | 58 | 3.1 | No | 2 | M6 | 55205K121 | 00000 | |
For Flat/Rectangle Bodies
|
Style 11 |
Lg., mm | Sensor/Switch Mounting | Surface Mounting | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Material | (A) | (B) | (C) | Thk., mm | Fasteners Included | No. of Slots | No. of Holes | For Screw Size | Fasteners Included | No. of Slots | No. of Holes | For Screw Size | Each | ||
| 11 | Zinc-Plated Iron | 50 | 22 | 60 | 2 | Yes | 2 | 2 | M4 | Yes | 2 | 1 | M6 | 55205K201 | 00000 | |
Flat-Surface Machine Brackets
 |
Used for mounting applications on machines and automated equipment, these brackets are made to meet tight dimensional tolerances.
Lg., mm | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (C) | Lg. Tolerance, mm | Thk., mm | Thk. Tolerance, mm | Flatness Tolerance, mm | Wt. Cap. | Mount Type | Fasteners Included | No. of Slots | For Screw Size | Each | |||
Dull 6061 Aluminum | ||||||||||||||
| 60 | 20 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 0.38 | Not Rated | Screw On | No | 2 | M6 | 2312N41 | 00000 | ||
Dull 316 Stainless Steel | ||||||||||||||
| 60 | 20 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 0.38 | Not Rated | Screw On | No | 2 | M6 | 2312N24 | 0000 | ||
Offset-Surface Machine Brackets
 |
With tight dimensional tolerances, these brackets are good for mounting applications on machines and automated equipment.
Lg., mm | Mounting | ||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (C) | Offset | Lg. Tolerance, mm | Thk., mm | Thk. Tolerance, mm | Angle | Angle Tolerance | Corner Radius, mm | Flatness Tolerance, mm | Wt. Cap. | Mount Type | Fasteners Included | No. of Slots | For Screw Size | Each | |||
Dull 316 Stainless Steel | |||||||||||||||||||
| 40 | 45 | 45 | 25 | -0.5 to 0.5 | 3 | -0.2 to 0.2 | 90° | -1° to 1° | 3.2 | 0.38 | Not Rated | Screw On | No | 4 | M6 | 2314N17 | 000000 | ||
Tie-Down Rings
 |
Style H |
These rings pivot to secure loads in various directions.
Warning: Never use for lifting applications.
316 Stainless Steel—316 stainless steel rings have excellent resistance to salt water and chemicals.
Ring | Base | Mounting Holes | Each | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Wt. Cap., lb. | Inner Wd. | Ht. | Thk. | Style | Lg. | Wd. | Material | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Wd. | Ctr.-to-Ctr. Lg. | For Mounting Screw Size | 1-99 | 100-Up | |||
316 Stainless Steel | |||||||||||||||||||
| H | 3,170 | 1 1/16" | 1 3/16" | 1/4" | D-Ring | 1 5/8" | 1 3/4" | 316 Stainless Steel | No | 3 | 1/4" | 1 1/16" | 1 1/16" | M6 | 33815T11 | 000000 | 000000 | ||
Base-Mount Drawer Slides
 |  |
With Lever Drawer Release | Without Drawer Release |
When you don't have enough clearance for side-mount or under-the-counter slides, mount these to the base of your drawer. The slides fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation.
Lever Drawer Release—Slides with lever drawer release let you remove your drawer from its cabinet by separating the inner part of the slide from the outer track.
Without Release—Slides without a drawer release prevent drawers from being removed. Because they don’t come apart, these slides provide the most support for drawers containing heavy items.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Closed Lg. | Travel Lg. | For Max. Drawer Wd. | Wd. | Ht. | Wt. Cap. per Pair, lb. | Roller Type | Fasteners Included | Screw Size | Extension | Pair | |||
Steel | |||||||||||||
Lever Drawer Release | |||||||||||||
| 30" | 30" | 42" | 2 13/16" | 3/4" | 150 | Ball Bearing | No | 1/4", M6 | Full | 1102A36 | 0000000 | ||
| 32" | 32" | 42" | 2 13/16" | 3/4" | 150 | Ball Bearing | No | 1/4", M6 | Full | 1102A37 | 000000 | ||
| 34" | 34" | 42" | 2 13/16" | 3/4" | 150 | Ball Bearing | No | 1/4", M6 | Full | 1102A38 | 000000 | ||
| 36" | 36" | 42" | 2 13/16" | 3/4" | 150 | Ball Bearing | No | 1/4", M6 | Full | 1102A39 | 000000 | ||
Without Release | |||||||||||||
| 10" | 10" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A31 | 000000 | ||
| 12" | 12" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A32 | 000000 | ||
| 14" | 14" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A63 | 000000 | ||
| 16" | 16" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A64 | 000000 | ||
| 18" | 18" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A65 | 000000 | ||
| 20" | 20" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A66 | 000000 | ||
| 22" | 22" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A67 | 000000 | ||
| 24" | 24" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A68 | 000000 | ||
| 26" | 26" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A69 | 000000 | ||
| 28" | 28" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A71 | 000000 | ||
| 30" | 30" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A72 | 000000 | ||
| 32" | 32" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A73 | 000000 | ||
| 36" | 36" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A75 | 000000 | ||
| 40" | 40" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A76 | 000000 | ||
| 42" | 42" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A33 | 000000 | ||
| 44" | 44" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A34 | 000000 | ||
| 48" | 48" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A78 | 000000 | ||
| 54" | 54" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A35 | 000000 | ||
| 60" | 60" | 32" | 3" | 3/4" | 180 | Ball Bearing | No | 1/4", M6 | Full | 1102A79 | 000000 | ||
Push-to-Open Drawer Slides
 |
No need to turn a knob or pull a handle—these slides open a drawer with a light push. They're often used in sanitary environments where you need to limit the surfaces you touch. They fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation. Mount them to the sides of drawer openings in cabinets. To remove your drawer from its cabinet, use the release lever to separate the inner part of the slide from the outer track.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Closed Lg. | Travel Lg. | For Max. Drawer Wd. | Wd. | Ht. | Wt. Cap. per Pair, lb. | Roller Type | Fasteners Included | Screw Size | Extension | Pair | |||
Steel | |||||||||||||
Lever Drawer Release | |||||||||||||
| 11 13/16" | 12" | 36" | 1/2" | 1 13/16" | 60 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A32 | 000000 | ||
| 13 3/4" | 14" | 36" | 1/2" | 1 13/16" | 75 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A33 | 00000 | ||
| 15 3/4" | 16" | 36" | 1/2" | 1 13/16" | 100 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A34 | 00000 | ||
| 17 3/4" | 18" | 36" | 1/2" | 1 13/16" | 100 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A35 | 00000 | ||
| 19 11/16" | 20" | 36" | 1/2" | 1 13/16" | 100 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A36 | 00000 | ||
| 21 5/8" | 22" | 36" | 1/2" | 1 13/16" | 100 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A37 | 00000 | ||
| 23 5/8" | 24" | 36" | 1/2" | 1 13/16" | 85 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A38 | 00000 | ||
| 25 9/16" | 26" | 36" | 1/2" | 1 13/16" | 70 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A39 | 00000 | ||
| 27 9/16" | 28" | 36" | 1/2" | 1 13/16" | 60 | Ball Bearing | Yes | M6, No. 8 | Full | 11435A41 | 00000 | ||
Hold-Open Drawer Slides
|
A stop holds your drawer in place when opened for sustained access to its contents. Push firmly on the drawer to close. These slides fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation. They mount to the sides of drawer openings in cabinets. To remove your drawer from its cabinet, these slides have a lever that separates the inner part of the slide from the outer track.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Closed Lg. | Travel Lg. | For Max. Drawer Wd. | Wd. | Ht. | Wt. Cap. per Pair, lb. | Roller Type | Fasteners Included | Screw Size | Extension | Pair | |||
Steel | |||||||||||||
Lever Drawer Release | |||||||||||||
| 11 13/16" | 12" | 24" | 1/2" | 1 13/16" | 75 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A42 | 000000 | ||
| 13 3/4" | 14" | 24" | 1/2" | 1 13/16" | 80 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A43 | 00000 | ||
| 15 3/4" | 16" | 24" | 1/2" | 1 13/16" | 85 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A44 | 00000 | ||
| 17 3/4" | 18" | 24" | 1/2" | 1 13/16" | 90 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A45 | 00000 | ||
| 19 11/16" | 20" | 24" | 1/2" | 1 13/16" | 95 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A46 | 00000 | ||
| 21 5/8" | 22" | 24" | 1/2" | 1 13/16" | 100 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A47 | 00000 | ||
| 23 5/8" | 24" | 24" | 1/2" | 1 13/16" | 95 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A48 | 00000 | ||
| 25 9/16" | 26" | 24" | 1/2" | 1 13/16" | 90 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A49 | 00000 | ||
| 27 9/16" | 28" | 24" | 1/2" | 1 13/16" | 85 | Ball Bearing | Yes | M6, No. 8 | Full | 1057A51 | 00000 | ||
 |  |
Shown Mounted Above Drawer Slide | Shown Mounted Inline with Drawer Slide |
 |
Clip On |
Mouting | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Travel Lg. | Lg. | Wd. | Ht. | Hardware Included | No. of Holes | Slot Lg. | Slot Wd. | Slot Ctr.-to-Ctr. | Pair | |||
Steel | ||||||||||||
Clip On | ||||||||||||
| 14" | 13 5/8" | 0.58" | 1.4" | No | 2 | 0.88" | 0.25" | 11.53" | 11435A204 | 00000 | ||
| 16" | 15 5/8" | 0.58" | 1.4" | No | 2 | 0.88" | 0.25" | 13.5" | 11435A51 | 0000 | ||
| 18" | 17 9/16" | 0.58" | 1.4" | No | 2 | 0.88" | 0.25" | 15.47" | 11435A52 | 0000 | ||
| 20" | 19 9/16" | 0.58" | 1.4" | No | 2 | 0.88" | 0.25" | 17.44" | 11435A53 | 0000 | ||
| 22", 24", 26", 28" | 21 1/2" | 0.58" | 1.4" | No | 2 | 0.88" | 0.25" | 19.41" | 11435A54 | 0000 | ||
 |  |
Screw On | Screw On |
Rear Mounting Brackets for Steel Slides with Lever Drawer Release—Rear mounting brackets let you mount your slide to the face frame and rear of your cabinet when there aren’t any vertical dividers or sides to mount to.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Travel Lg. | For Max. Drawer Wd. | Lg. | Wd. | Ht. | Hardware Included | No. of Holes | Slot Lg. | Slot Wd. | Slot Ctr.-to-Ctr. | Pair | |||
Zinc-Plated Steel | |||||||||||||
Screw On | |||||||||||||
| 6", 8", 10", 12", 14", 16", 18", 20", 22", 24", 26", 28" | 24" | 4" | 1.94" | 1.91" | No | 2 | 0.315" | 0.175" | 1.25" | 11435A203 | 00000 | ||
Stacked Drawer Slides
 |
The stacked design provides stability for deep and wide drawers. These slides fully extend for convenient access to the back of drawers. All have ball bearing rollers for smooth, quiet operation. They mount to the sides of drawer openings in cabinets. If you need to remove your drawer from its cabinet, these slides have a lift-out release that separates the slide parts.
Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Closed Lg. | Travel Lg. | For Max. Drawer Wd. | Wd. | Ht. | Wt. Cap. per Pair, lb. | Roller Type | Fasteners Included | Screw Size | Extension | Pair | |||
Steel | |||||||||||||
Lift-Out Drawer Release | |||||||||||||
| 11 13/16" | 12 1/4" | 27" | 1/2" | 3 13/16" | 140 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A29 | 000000 | ||
| 13 3/4" | 14 3/16" | 27" | 1/2" | 3 13/16" | 145 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A31 | 00000 | ||
| 15 3/4" | 16 1/8" | 27" | 1/2" | 3 13/16" | 150 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A32 | 00000 | ||
| 17 3/4" | 18 1/8" | 27" | 1/2" | 3 13/16" | 150 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A33 | 00000 | ||
| 19 11/16" | 20" | 27" | 1/2" | 3 13/16" | 145 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A34 | 00000 | ||
| 21 5/8" | 21 15/16" | 27" | 1/2" | 3 13/16" | 140 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A35 | 00000 | ||
| 23 5/8" | 24 3/8" | 27" | 1/2" | 3 13/16" | 135 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A36 | 00000 | ||
| 25 9/16" | 26 5/16" | 27" | 1/2" | 3 13/16" | 130 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A37 | 00000 | ||
| 27 9/16" | 28 1/4" | 27" | 1/2" | 3 13/16" | 130 | Ball Bearing | Yes | M6, No. 8 | Full | 17165A38 | 00000 | ||
