Selecting U-Bolts Using Pipe, Conduit, or Tubing Trade Size
More
Selecting Clamps Using Pipe, Conduit, or Tubing Trade Size
More
Strut Channel Floor Mounts
Securely fasten strut channel to the floor.
Rubber mounts are the least abrasive and they distribute loads better than metal mounts. They’re often used on roof surfaces.
For technical drawings and 3-D models, click on a part number.
For Strut Channel | Mounting Holes | Post Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Lg. | Wd. | Ht. | Thick. | Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. | Dia. | Each | |
Straight Post, For 1 Strut Channel | ||||||||||||
Black Rubber | ||||||||||||
| 1 5/8" | 1 5/8" | 12 3/8" | 12 3/8" | 4 5/8" | 11/16" | Yes | 4 | 7/16" | 10 7/8" | 1/2" | 000000000 | 0000000 |
Strut Channel Covers
Create a four-sided raceway for cable, or give a more finished look to strut channel structures.
Rubber covers cushion pipe and duct work to reduce vibration. They’re also flexible.
For technical drawings and 3-D models, click on a part number.
10 ft. | |||
|---|---|---|---|
| Material | For Strut Channel Wd. | Each | |
Flexible | |||
| Black Rubber | 1 5/8" | 00000000 | 0000000 |
Clamp-On Framing and Fittings
Fittings come in two pieces to clasp over rails, making assembly and disassembly quicker than our other framing. Use it to form temporary partitions, modular conveyors, and workstations. To assemble, clamp fittings onto the rail and tighten the included cap screw and nut. For permanent connections and added strength, fittings have a 5/32" hole to drill in an additional screw (not included).
For technical drawings and 3-D models, click on a part number.
Swivel stem casters fit directly into the end of the rail.
Swivel plate casters clamp onto horizontal rails.
For Rail OD | Caster | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Mounting Foot Type | Features | Inch | Metric, mm | Capacity, lbs. | Material | Frame Material | Wheel Dia. | Wheel Material | Mounting Fasteners Included | Each | |
| Swivel Stem Caster | __ | 1.08" | 28 | 150 | Rubber | Steel | 3" | Red Rubber | Yes | 0000000 | 000000 |
| Swivel Stem Caster | Brake | 1.08" | 28 | 150 | Rubber | Steel | 3" | Red Rubber | Yes | 0000000 | 00000 |
| Swivel Plate Caster | Brake | 1.08" | 28 | 350 | Rubber | Steel | 4" | Blue Rubber | Yes | 0000000 | 00000 |
Strut-Mount Vibration-Damping Routing Clamps
Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.
TPE clamps hold lines of pipe, tubing, and conduit in light duty applications without the need for fasteners or installation tools. Made from a single piece of rubber, they prevent corrosion caused by metal-to-metal contact and resist most oils, chemicals, and cleaning compounds. To install, insert the clamp into strut channel and twist it 90° to secure. Then, press material into the clamp.
For technical drawings and 3-D models, click on a part number.
ID | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size  | Capacity | Lg. | Wd. | Ht. | Center Ht. | Thick. | For Strut Channel Wd. | Temp. Range, °F | Each | |
TPE Rubber | ||||||||||||
| 1/4" | 6 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 5/16" | 3/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 00000 |
| 3/8" | 10 | __ | 75 lbs. | 1 5/16" | 1 3/8" | 1 1/2" | 5/16" | 5/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1/2" | 13 | 1/8 | 75 lbs. | 1 1/2" | 1 3/8" | 1 13/16" | 7/16" | 3/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 5/8" | 16 | 1/4 | 75 lbs. | 1 1/2" | 1 3/8" | 2" | 1/2" | 7/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 3/4" | 18 | __ | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 1/2" | 1/8" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 3/4" | 19 | 3/8 | 75 lbs. | 1 1/2" | 1 3/8" | 2 1/8" | 9/16" | 9/64" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 7/8" | 22 | 1/2 | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 15/16" | 23 | __ | 75 lbs. | 1 5/8" | 1 3/8" | 2 1/2" | 11/16" | 5/32" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1 1/8" | 29 | 3/4 | 75 lbs. | 1 15/16" | 1 3/8" | 2 7/8" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
| 1 3/16" | 30 | __ | 75 lbs. | 1 15/16" | 1 3/8" | 3" | 13/16" | 3/16" | 1 5/8" | -50° to 275° | 000000000 | 0000 |
Nonconductive U-Bolts
These fiberglass-reinforced polyurethane U-bolts won't conduct electricity or cause metal-to-metal corrosion. They are abrasion, chemical, and UV resistant. Use them to support pipe, tube, and conduit from ceilings, walls, and poles.
For technical drawings and 3-D models, click on a part number.
ID | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | Ht. | Thread Lg. | Capacity, lbs. | Color | Ctr.-to-Ctr. | No. of Nuts Included | Temp. Range, ° F | Each | |
Polyurethane Rubber | |||||||||||
3/8"-16 Thread Size | |||||||||||
| 15/16" | 24 | 1/2 | 2 1/16" | 1 1/4" | 75 | Gray | 1 5/16" | 2 | -40° to 150° | 00000000 | 000000 |
| 1 1/8" | 29 | 3/4 | 2 1/4" | 1 1/4" | 75 | Gray | 1 1/2" | 2 | -40° to 150° | 00000000 | 00000 |
| 1 3/8" | 35 | 1 | 2 1/2" | 1 1/4" | 75 | Gray | 1 3/4" | 2 | -40° to 150° | 00000000 | 00000 |
| 1 11/16" | 43 | 1 1/4 | 2 13/16" | 1 1/4" | 75 | Gray | 2 1/16" | 2 | -40° to 150° | 00000000 | 00000 |
| 2" | 51 | 1 1/2 | 3 1/8" | 1 1/4" | 75 | Gray | 2 3/8" | 2 | -40° to 150° | 00000000 | 00000 |
1/2"-13 Thread Size | |||||||||||
| 2 7/16" | 62 | 2 | 3 11/16" | 1 1/2" | 150 | Gray | 2 15/16" | 2 | -40° to 150° | 00000000 | 00000 |
| 2 15/16" | 75 | 2 1/2 | 4 3/16" | 1 1/2" | 150 | Gray | 3 7/16" | 2 | -40° to 150° | 00000000 | 00000 |
| 3 9/16" | 90 | 3 | 4 13/16" | 1 1/2" | 150 | Gray | 4 1/16" | 2 | -40° to 150° | 00000000 | 00000 |
| 4 1/16" | 103 | 3 1/2 | 5 3/8" | 1 1/2" | 150 | Gray | 4 9/16" | 2 | -40° to 150° | 00000000 | 00000 |
| 4 9/16" | 116 | 4 | 5 7/8" | 1 1/2" | 150 | Gray | 5 1/16" | 2 | -40° to 150° | 00000000 | 00000 |
Stackable Vibration-Damping Threaded-Rod-Mount Clamping Hangers
 Shown Connected |  End Clamp |
 Stacking Clamp |
Connect these hangers together to organize multiple lines of pipe, tubing, and conduit. They have a tight-fitting, santoprene body that reduces vibration and prevents corrosion caused by metal-to-metal contact. The smooth surface of the rubber prevents debris buildup and makes cleaning easy.
End clamps have a top plate with a threaded hole for mounting with threaded rod and a bottom plate with hardware for holding clamps together. You can attach a stacking clamp to the bottom of an end clamp.
Stacking clamps have stacking hardware and a plate for attaching to an end clamp or to other stacking clamps. They must be connected to an end clamp to mount.
Note: All hangers must be the same length and height. Do not exceed the capacity of the individual hanger in multiple hanger applications.
For technical drawings and 3-D models, click on a part number.
ID | Plate Material | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric, mm | For Pipe Size | For Thread Size | Color | Top | Bottom | Cap., lbs. | Lg. | Wd. | Ht | Temp. Range, °F | Includes | Specifications Met | Each | |
Santoprene Rubber | |||||||||||||||
End Clamp | |||||||||||||||
| 1/4" | 6 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 000000 |
| 1/2" | 13 | 1/8 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 3/4" | 19 | 3/8 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 1" | 25 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 1" | 25 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 1 1/2" | 38 | __ | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 2" | 51 | 1 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 2" | 51 | 1 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 2 1/2" | 64 | 2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 3" | 76 | 2 1/2 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
| 3 1/2" | 89 | 3 | 3/8"-16 | Beige | 304 Stainless Steel | 304 Stainless Steel | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | __ | DIN 3015-1 | 0000000 | 00000 |
Stacking Clamp | |||||||||||||||
| 1/4" | 6 | __ | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 1/2" | 13 | 1/8 | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 3/4" | 19 | 3/8 | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 1" | 25 | __ | __ | Beige | __ | __ | 350 | 1 15/16" | 1 1/4" | 1 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 1" | 25 | __ | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 1 1/2" | 38 | __ | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 2" | 51 | 1 1/2 | __ | Beige | __ | __ | 350 | 3 3/8" | 1 1/4" | 2 11/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 2" | 51 | 1 1/2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 2 1/2" | 64 | 2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 3" | 76 | 2 1/2 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
| 3 1/2" | 89 | 3 | __ | Beige | __ | __ | 350 | 5" | 1 1/4" | 4 7/16" | -40° to 270° | Stacking Hardware and Plate | DIN 3015-1 | 0000000 | 00000 |
Cable Holders
Mount to a surface to secure and route cable.
Clip-on cable holders slide on to panels or cabinets to grip.
Style AA and BB clip on to pipe and conduit.
Cable Holder Assortments
Keep an assortment of large and small cable holders on hand for holding and routing cable across your surface.
For technical drawings and 3-D models, click on a part number.
| Total No. of Pieces | Includes | For Use Outdoors | Each | |
Black | ||||
|---|---|---|---|---|
Adhesive-Back Mount | ||||
Rubber | ||||
| 18 | 12 Small Cable Holders—0.78" Lg. × 0.65" Wd. × 0.67" Ht. (for 3/8" max. bundle dia.) 6 Large Cable Holders—0.98" Lg. × 0.78" Wd. × 0.82" Ht. (for 1/2" max. bundle dia.) | No | 0000000 | 000000 |
White | ||||
Adhesive-Back Mount | ||||
Rubber | ||||
| 18 | 12 Small Cable Holders—0.78" Lg. × 0.65" Wd. × 0.67" Ht. (for 3/8" max. bundle dia.) 6 Large Cable Holders—0.98" Lg. × 0.78" Wd. × 0.82" Ht. (for 1/2" max. bundle dia.) | No | 0000000 | 00000 |
Extra-Wide Elastic Cable Ties
Elastic Beaded Cable Ties
The evenly spaced ball-shaped beads allow you to adapt to changes in the bundle size.
Guards for Hose and Tube Clamps
Cover the ends of hose and tube clamps to prevent them from cutting people and nearby objects. Made of flexible TPE plastic, these guards can be cut to size for shorter bands or T-bolts.
