Filter by
System of Measurement
Screw Size
Mount Type
Length
Weight Capacity
Mounting Location
Finish
Thread Size
Mounting Hole Style
Angle
DFARS Specialty Metals
Appearance
Export Control Classification Number (ECCN)
For Use With
Clamping Action
Corner Brackets
 |  |
Style 11 | Style 14 |
 |  |
Style 15 | Style 16 |
Lg. | Each | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Material | Appearance | (A) | (B) | (C) | Thk. | Wt. Cap. | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | For Screw Size | 1-49 | 50-Up | |||
Screw On | ||||||||||||||||
| 11 | Galvanized Steel | Dull | 2 7/8" | 6 1/8" | 3 1/8" | 0.06" | 500 lb. | No | 5 | Straight | 1/2" | 15655A28 | 000000 | 000000 | ||
| 11 | 316 Stainless Steel | Dull | 2 7/8" | 6 1/8" | 3 1/8" | 0.06" | 500 lb. | No | 5 | Straight | 1/2" | 15655A29 | 00000 | 00000 | ||
| 14 | Galvanized Steel | Dull | 5 5/8" | 5 5/8" | 5" | 0.25" | Not Rated | No | 8 | Straight | 1/2" | 1845A34 | 00000 | 00000 | ||
| 14 | Galvanized Steel | Dull | 9 3/4" | 9 3/4" | 5" | 0.25" | Not Rated | No | 8 | Straight | 1/2" | 1845A35 | 00000 | 00000 | ||
| 15 | Galvanized Steel | Dull | 8 1/4" | 8 1/4" | 5" | 0.25" | Not Rated | No | 8 | Straight | 1/2" | 1845A38 | 00000 | 00000 | ||
| 16 | Galvanized Steel | Dull | 2 1/2" | 2 1/2" | 5" | 0.24" | Not Rated | No | 4 | Straight | 1/2" | 1845A41 | 00000 | 0000 | ||
Corner Machine Brackets
 |  |
With Two Mounting Slots | With Four Mounting Slots |
Made to meet tight dimensional tolerances for mounting applications on machines and automated equipment.
Lg. | Mounting | Each | |||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (B) | (C) | Lg. Tolerance | Thk. | Thk. Tolerance | Angle | Angle Tolerance | Corner Radius | Flatness Tolerance | Wt. Cap. | Mount Type | Fasteners Included | No. of Slots | For Screw Size | 1-19 | 20-Up | |||
Dull 6061 Aluminum | |||||||||||||||||||
| 1 3/4" | 1 3/4" | 2" | -0.044" to 0.044" | 0.125" | -0.009" to 0.009" | 90° | -1° to 1° | 1/8" | 0.015" | Not Rated | Screw On | No | 2 | 1/2" | 2313N51 | 00000 | 00000 | ||
Dull 316 Stainless Steel | |||||||||||||||||||
| 3" | 2" | 2" | -0.02" to 0.02" | 0.12" | -0.005" to 0.005" | 90° | -1° to 1° | 1/8" | 0.015" | Not Rated | Screw On | No | 2 | 1/2" | 2313N25 | 00000 | 00000 | ||
| 3" | 3" | 3" | -0.02" to 0.02" | 0.25" | -0.015" to 0.015" | 90° | -1° to 1° | 1/4" | 0.015" | Not Rated | Screw On | No | 4 | 1/2" | 2313N32 | 00000 | 00000 | ||
Flat-Surface Machine Brackets
 |
Used for mounting applications on machines and automated equipment, these brackets are made to meet tight dimensional tolerances.
Lg. | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
(A) | (C) | Lg. Tolerance | Thk. | Thk. Tolerance | Flatness Tolerance | Wt. Cap. | Mount Type | Fasteners Included | No. of Slots | For Screw Size | Each | |||
Dull 6061 Aluminum | ||||||||||||||
| 4" | 1 1/4" | -0.02" to 0.02" | 0.188" | -0.005" to 0.005" | 0.015" | Not Rated | Screw On | No | 2 | 1/2" | 2312N35 | 00000 | ||
Dull 316 Stainless Steel | ||||||||||||||
| 4" | 1 1/4" | -0.02" to 0.02" | 0.188" | -0.005" to 0.005" | 0.015" | Not Rated | Screw On | No | 2 | 1/2" | 2312N23 | 0000 | ||
Flat-Surface Brackets
 |
Style 5 |
Lg. | Each | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | Material | Appearance | (A) | (C) | Thk. | Wt. Cap. | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | For Screw Size | 1-49 | 50-Up | ||
| 5 | Galvanized Steel | Dull | 5 1/4" | 5 1/4" | 0.13" | Not Rated | No | 4 | Straight | 1/2" | 1845A45 | 00000 | 00000 | |
Pin-Lock Brackets
 |  |  |
Pin not included | Style 1 | Style 2 |
Lock these brackets together with a pin or a bolt. All components are sold separately. They are often used on marine docks.
Lg. | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Style | (A) | (C) | Projection | Thk. | For Pin Dia. | Wt. Cap. | Mount Type | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | For Screw Size | Each | |||
Dull Galvanized Steel | |||||||||||||||
| 1 | 5 1/4" | 5 1/4" | 2 5/8" | 0.19" | 3/4" | Not Rated | Screw On | No | 4 | Straight | 1/2" | 1845A46 | 000000 | ||
| 2 | 5 1/4" | 5 1/4" | 2 5/8" | 0.19" | 3/4" | Not Rated | Screw On | No | 4 | Straight | 1/2" | 1845A47 | 00000 | ||
Webbing Anchor Plates
 |  |
Mounting Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
For Max. Webbing Wd. | Work Load Limit, lb. | Lg. | Wd. | Mounting Fasteners Included | No. of | Dia. | Each | |||
Zinc-Plated Steel | ||||||||||
| 2" | 1,000 | 1 7/8" | 2 3/4" | No | 1 | 1/2" | 3648T95 | 000000 | ||
Build-Your-Own Heavy Duty Handrail Mounting Brackets
 |
Create custom brackets to support metal handrails on stairs, ramps, and railings by cutting, machining, and welding these components.
Bases
 |
Material | Appearance | Dia. | Thk. | Wt. Cap., lb. | Mount Type | Mounting Fasteners Included | For Screw Size (No. of Mounting Holes) | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Steel | Dull | 3" | 1/4" | 200 | Weld On | No | 1/2" (1 Straight) | 1743A16 | 00000 | ||
Door Stops for Sliding Doors
 |
Style 4 |
Keep sliding doors and panels from damaging walls and door frames. Mount these stops with screws.
Style 4—Style 4 mount on walls and ceilings.
304 Stainless Steel—Stainless steel stops have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance. They include a rubber bumper, which is abrasion resistant.
Wraparound Rope Cleats
 |
Style A |
Wind rope around these cleats for a secure, temporary hold.
Warning: Never use for lifting applications.
Style A
|
Bolt On—Bolt-on cleats have exposed fasteners that attach directly to the deck or other surface.
Galvanized Iron—Galvanized iron cleats have mild corrosion resistance.
Mounting Holes | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
For Max. Rope Dia. | Lg. | Overall Ht. | Mounting Fasteners Included | No. of | Dia. | Ctr.-to-Ctr. Lg. | For Mounting Screw Size | Each | |||
Bolt On | |||||||||||
Galvanized Iron | |||||||||||
| 1" | 14" | 3 1/2" | No | 2 | 5/8" | 4 1/4" | 1/2" | 33805T48 | 000000 | ||
Door Guides
 |
Style 7 |
Steady sliding doors as they open and close. These guides control your door's motion and keep the bottom of the door from swinging. Made to resist corrosion, they’re suitable for both exterior and interior doors.
Guides
|
Style 7 |
Style 7—Style 7 have a concrete anchor that bolts directly to cement floors. Drill a hole into the floor and press the included anchor shield inside to hold these guides firm. A roller at the top of the anchor spins as your door opens or closes.
Style | For Max. Door Thk. | Ht. | Dia. | Thread Lg. | Material | Roller Material | Mounting Fasteners Included | Mounting Screw Size | Each | |||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Floor Mount | ||||||||||||
| 7 | Any | 2 3/4" | 2 1/2" | 2 1/8" | Steel | Rubber | Yes | 1/2" | 7791N13 | 000000 | ||
Hydraulic Convertible Side Clamps
 |  |  |
Max. Clamping Stroke | Holding Force, lbf | Set Screw Drive | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Lg. | Wd. | Jaw Ht. | Mechanical | Hydraulic | Mechanical | Hydraulic | Slot Lg. | Edge-to-Slot Lg. | Size | Style | Thread Size | Material | Fasteners Included | Each | |||
For 1/2", M12 Mounting Screw Size | ||||||||||||||||||
| 1 1/2" | 3 3/8" | 2 3/4" | 3/8" | 3/8" | 5/16" | 2,000 | 250 | 1" | 1" | 3/8" | Hex | 1/2"-20 | Steel | No | 9997N102 | 0000000 | ||
| 2 3/8" | 3 1/4" | 2 3/4" | 3/8" | 1/2" | 1/4" | 2,500 | 560 | 1" | 1/2" | 3/8" | Hex | 1/2"-20 | Steel | No | 9997N101 | 000000 | ||
Milling-Machine Vise Jaws with Changeable Parallels
 |
Quickly move parallels in and out of these jaws and raise your workpiece within the vise. Choose jaws and the mating pair or set of parallels. Mount jaws to the vise, slide the parallels in place, and then rest your workpiece on top to allow more clearance for cutting tools.
Jaws
 |
Jaw | Mounting | Steel Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Pair | |||
Flat Jaw | |||||||||||
| 6" | 1 3/4" | 0.735" | -0.001" to 0.001" | No | 17/32" | 3 7/8" | 1/2" | 1005N12 | 0000000 | ||
Quick-Change Milling-Machine Vise Jaws
 |
Significantly cut down on jaw changeover time—this two-part system lets you swap out jaws in less than 30 seconds. Mount the jaw plates to the vise and slide the dovetailed jaw stock in and out of the plates.
Jaw Plates
 |
Jaw plates have set screws on top for securing the jaw stock. Tighten using the included T-handle key. Plates have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaw | Mounting | Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Includes | Pair | |||
Flat Jaw | ||||||||||||
| 6" | 1 3/4" | 0.688" | -0.0005" to 0.0005" | Yes | 17/32" | 3 7/8" | 1/2" | 1/4" Hex T-Handle Key | 2406N1 | 0000000 | ||
Adjustable-Angle Milling-Machine Vise Jaws
 |  |
Arrange the included pins in a series of holes to position a part at any angle and hold odd-shaped parts securely.
Jaw | Pin | Mounting | Steel Jaw | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Dia. | Dia. Tolerance | Workholding Angle | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Includes | Pair | |||
Adjustable-Pin Jaw | |||||||||||||||
| 6" | 1 3/4" | 0.725" | -0.0008" to 0.0008" | 1/4" | -0.0007" to 0.0007" | 5°, 10°, 15°, 20°, 25°, 30°, 45° | No | 17/32" | 3 7/8" | 1/2" | Four 7/8" Lg. Pins Three 1 19/32" Lg. Pins Three 2 9/32" Lg. Pins Three 3" Lg. Pins | 1005N26 | 0000000 | ||
Hardened Milling-Machine Vise Jaws
 |
Hardened for wear resistance, these steel jaws are replacements for the ones that come installed on your vise. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaw | Mounting | Steel Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Pair | |||
Flat Jaw | |||||||||||
| 6" | 1 3/4" | 0.725" | -0.0005" to 0.0005" | No | 17/32" | 3 7/8" | 1/2" | 8474A22 | 0000000 | ||
Slotted Milling-Machine Vise Jaws
 |
Hold workpieces steady with these vise jaws—they work with slot-mount workstops so you can quickly position, adjust, and change out your workpieces. Using jaws and workstops together keeps the workpiece from slipping, and gives you more control over the position than jaws alone. Slide your workstop into a slot on either the top or the bottom jaw and tighten with a screw. One slot is closer to the jaw face than the other to give you more positioning options. These jaws have industry-standard mounting hole patterns to match most vises, including those made by Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaw | Mounting | Steel Jaw | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Each | |||
Flat Jaw | |||||||||||
| 6" | 1 7/8" | 0.735" | -0.0005" to 0.0005" | No | 17/32" | 3 7/8" | 1/2" | 3740N12 | 0000000 | ||
Milling-Machine Vise Jaws for Round Material
 |  |
Vertical Groove | Vertical and Horizontal Grooves |
The V-shaped recess holds round material securely for machining. Place one of these jaws on one side of your vise and use a flat jaw on the other. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
Jaws with vertical and horizontal grooves holds 1/2" to 1 1/4" dia. workpieces vertically and 1/4" to 1/2" dia. workpieces horizontally.
Vertical Groove—Jaws with vertical groove holds 3/4" to 1 3/4" dia. workpieces.
Jaw | For Workpiece Dia. | Mounting | Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Vertical | Horizontal | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Each | |||
Grooved Jaw | |||||||||||||
Vertical Groove | |||||||||||||
| 6" | 1 3/4" | 1.26" | -0.005" to 0.005" | 3/4" to 1 3/4" | — | No | 17/32" | 3 7/8" | 1/2" | 2579N1 | 0000000 | ||
Vertical and Horizontal Grooves | |||||||||||||
| 6" | 1 3/4" | 1" | -0.005" to 0.005" | 1/2" to 1 1/4" | 1/4" to 1/2" | No | 17/32" | 3 7/8" | 1/2" | 2579N2 | 000000 | ||
Machinable Milling-Machine Vise Jaws
 |
Made from unhardened metal, machine these jaws to fit the contours and curves of your workpiece. They have an industry standard hole pattern that fits most manufacturers' vises, including Kurt, Chick, TE-CO, Toolex, and Palmgren.
1018 Low-Carbon Steel Jaw—1018 low-carbon steel jaws are more durable than 6061 aluminum.
Jaw | Mounting | 6061 Aluminum Jaw | 1018 Low-Carbon Steel Jaw | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wd. | Ht. | Thk. | Thk. Tolerance | Fasteners Included | Hole Dia. | Hole Ctr.-to-Ctr. | For Mounting Screw Size | Pair | Pair | ||||
Flat Jaw | |||||||||||||
| 6" | 2" | 1" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N28 | 000000 | 1005N38 | 000000 | ||
| 6" | 2" | 1.25" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N24 | 00000 | 1005N39 | 000000 | ||
| 6" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N29 | 00000 | 1005N41 | 000000 | ||
| 6" | 2" | 2" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N31 | 00000 | 1005N42 | 000000 | ||
| 6" | 3" | 2" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N32 | 000000 | 1005N43 | 000000 | ||
| 8" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N33 | 000000 | 1005N44 | 000000 | ||
| 10" | 2" | 1.5" | -0.002" to 0.002" | No | 0.532" | 3 7/8" | 1/2" | 1005N34 | 000000 | 1005N45 | 000000 | ||
