We will reply to your message within an hour.
The slotted bar on these buckles allows you to attach an eye easily.
Permanently sew webbing onto these buckles.
Attach webbing to these buckles without sewing.
These buckles have a bar that grips webbing tightly without sewing.
These slides are rated for heavy duty applications.
Add a slide to webbing to make adjustable straps.
Use the split in the hook to slide a loop on and off these fittings.
Permanently sew webbing onto these hooks.
The base of these hooks grip rope.
Attach tips to webbing to prevent frayed ends and make it easier to thread.
Sew webbing onto these plates for a permanent anchor point or run webbing through to use them as guides.
Also known as lashing straps, use these to tightly secure material.
The hook on these straps quickly connects to the buckle—no need to spend time threading the end through the buckle.
Cut rolls to length and add the no-sew buckle.
Cut rolls to length and add the no-sew buckles. These straps stretch to hold bundles tight.
The rubber strap holds bundles tight by conforming to the shape of the material.
Create custom-length cable ties for large bundles and heavy materials.
Slip these buckles onto strapping as you tighten.
Crimp these seals with a sealer after pulling strap tight with a tensioner.
Use these buckles to secure Light Duty Metal Strapping around pipe or packages.
Use a sealer to crimp these seals onto metal strapping to keep it under tension.
Use this metal strapping for securing pipe coverings as well as for packaging.
Designed for both permanent connections and emergency repairs, use these buckles with banding to create your own low-profile hose clamps.
Keep this banding on hand for both permanent connections and emergency repairs. You'll need an installation tool and a buckle (both sold separately) to create a band clamp.
These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.
The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.
Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.
Create 2" diameter and larger smooth-band worm-drive clamps.
The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.
Hang, pull, and secure loads. These rings are good for general non-lifting applications.