Filter by
For Use On
For Finish
For Polishing Step
Grit Rating
Abrasive Grain Size
Material
Abrasive Material
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Sold As
Hardness Rating
Buffing and Polishing Compounds
 |
Remove scratches, oxidation, and other surface imperfections from your workpiece. Apply a layer of compound by holding these bars against a revolving buffing wheel or polishing bob. Microns are approximate.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and imperfections.
2. Coloring produces an even finish.
Cutting/coloring compounds perform both steps at once.
Vegetable-Based—Pair with synthetic-felt polishing bobs to finish workpieces without using any animal-derived materials.
4 oz. | 6 oz. | 1 lb. | 2 lb. | 3 lb. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Abrasive Material | Abrasive Grain Size, μm | For Finish | Color | Vegetable Based | Each | Each | Each | Each | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel and Stainless Steel | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 40 | Extra Smooth | Gray | No | ——— | 0 | 0000000 | 00000 | 0000000 | 00000 | ——— | 0 | 000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 40 | Extra Smooth | Gray | Yes | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 000000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Chrome Oxide | 1 | Polished | Green | No | ——— | 0 | 00000000 | 0000 | 00000000 | 00000 | ——— | 0 | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Chrome Oxide | 1 | Polished | Green | Yes | ——— | 0 | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 5 | Polished | Yellow | No | ——— | 0 | 0000000 | 0000 | 0000000 | 0000 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Chrome, Steel, Stainless Steel, and Iron | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 4 | Polished | White | No | ——— | 0 | ——— | 0 | ——— | 0 | ——— | 0 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 5 | Polished | White | No | ——— | 0 | ——— | 0 | ——— | 0 | ——— | 0 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Steel, Stainless Steel, Aluminum, Brass, Bronze, and Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 2 | Polished | White | Yes | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 3 | Polished | White | No | ——— | 0 | 0000000 | 0000 | 0000000 | 00000 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 4 | Polished | Yellow | Yes | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Aluminum, Brass, Bronze, and Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 2 | Polished | Black | No | ——— | 0 | ——— | 0 | ——— | 0 | ——— | 0 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 15 | Polished | Brown Tripoli | Yes | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 35 | Extra Smooth | Brown Tripoli | No | ——— | 0 | 0000000 | 0000 | 0000000 | 0000 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 35 | Extra Smooth | Brown Tripoli | Yes | ——— | 0 | ——— | 0 | ——— | 0 | 000000 | 00000 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 50 | Extra Smooth | Brown Tripoli | No | ——— | 0 | 0000000 | 0000 | 0000000 | 0000 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Brass, Bronze, and Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Iron Oxide | 0.5 | Polished | Red Rouge | No | ——— | 0 | 0000000 | 0000 | ——— | 0 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Fiberglass | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Calcined Alumina | 1 | Polished | White | No | ——— | 0 | 0000000 | 0000 | 0000000 | 00000 | ——— | 0 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Plastic and Rubber | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 45 | Extra Smooth | Beige | No | ——— | 0 | 0000000 | 0000 | 0000000 | 0000 | ——— | 0 | 000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Quartz | 15 | Polished | Tan | No | ——— | 0 | ——— | 0 | 00000000 | 0000 | ——— | 0 | 00000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Silica | 35 | Extra Smooth | Brown | No | 00000000 | 00000 | ——— | 0 | 00000000 | 00000 | ——— | 0 | ——— | 0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Buffing and Polishing Compound Assortments
 |
No. of Pieces | Includes | Each | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cutting, Coloring, and Cutting/Coloring | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 4 | One 4 oz. Smooth-Finish Gray Cutting Compound One 4 oz. Extra-Smooth-Finish Brown Cutting/Coloring Compound One 4 oz. Polished-Finish White Rouge Coloring Compound One 4 oz. Polished-Finish Red Rouge Coloring Compound | 000000 | 000000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 6 | One 1 lb. Extra-Smooth-Finish Brown Cutting/Coloring Compound One 1 lb. Extra-Smooth-Finish Tan Cutting Compound One 1 lb. Polished-Finish White Rouge Coloring Compound One 1 lb. Polished-Finish Yellow Cutting/Coloring Compound One 1 lb. Polished-Finish White Coloring Compound One 1 lb. Polished-Finish Red Coloring Compound | 000000 | 00000 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Buffing Wheel and Compound Kits
 |
Remove scratches and gouges from your workpiece and bring it to a mirror-like finish. These kits include an assortment of buffing wheels and compounds for each step in the buffing process.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and surface imperfections.
2. Coloring produces an even finish.
Cutting/coloring compounds perform both steps at once.
The sisal wheel is durable and fast cutting—use it with the cutting compound to remove scratches and gouges. Use the cotton wheel with the cutting/color compound for your intermediate polishing step. For a mirror-like finish, use the soft flannel wheel with the coloring compound.
No. of Pieces | For Polishing Step | Includes | Max. Rotation Speed, rpm | Each | |||
|---|---|---|---|---|---|---|---|
| 6 | Cutting, Coloring, Cutting/Coloring | One Cotton Buffing Wheel—6" Dia. × 5/16" Thick. × 1" Arbor Hole One Sisal Buffing Wheel—6" Dia. × 5/8" Thick. × 1" Arbor Hole One Flannel Buffing Wheel—6" Dia. × 3/4" Thick. × 1/2" Arbor Hole One 1 lb. Extra-Smooth-Finish Gray Cutting Compound One 1 lb. Polished-Finish Yellow Cutting/Coloring Compound One 1 lb. Polished-Finish White Coloring Compound | 3,600 | 0000000 | 000000 | ||
Aggressive Buffing and Polishing Compounds
 |
Remove more material than traditional buffing compounds. These consist of abrasive grains embedded in glue to adhere to your buffing wheel. They remove scratches and surface imperfections and leave a dull satin finish. Also known as greaseless compounds. Apply by holding one of these bars against a revolving buffing wheel. Grit is approximate.
Cutting, the first step in the buffing process, removes scratches and surface imperfections.
Abrasive Material | Abrasive Grain Size, μm | Grit (For Finish) | Color | Dia. | Lg. | Wt., lb. | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Steel, Stainless Steel, Aluminum, Brass, Bronze, and Copper | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
For Cutting | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 38 | 400 (Extra Smooth) | Black | 2 1/2" | 10 1/2" | 3 | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 40 | 280 (Extra Smooth) | Black | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 60 | 240 (Extra Smooth) | Red | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 80 | 180 (Smooth) | Red | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 100 | 150 (Smooth) | Red | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 120 | 120 (Smooth) | Red | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Aluminum Oxide | 173 | 80 (Rough) | Red | 2 1/2" | 10 1/2" | 3 | 0000000 | 00000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Polishing Bob and Compound Kits
 |
Everything you need to polish small areas and hard-to-reach spots. These kits include polishing bobs in different shapes, sizes, and hardness ratings, along with buffing compounds. Use these bobs in a drill or grinder for bits and burs.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and surface imperfections.
2. Coloring produces an even finish.
Wool Felt—These bobs absorb and retain compounds better than synthetic felt bobs, so you don't need to reapply as often.
Synthetic Felt—These bobs have more pores than wool felt. For soft and medium bobs, the pores make the head squishy for squeezing into small spaces. For hard and extra hard bobs, the pores dissipate heat during aggressive polishing to extend the bobs’ life and prevent damage to your workpiece.
Soft—Create the finest finish and polish delicate materials.
Medium—Balance removing material with leaving a smooth finish.
Hard—For aggressive material removal.
Extra Hard—The most aggressive material removal. These bobs are also good for hard materials.
No. of Pieces | Hardness Rating | For Polishing Step | Includes | Container Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wool Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 20 | Medium, Hard | Cutting, Coloring | One Medium Cylinder with Flat Tip Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Cylinder with Round Tip Polishing Bob—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. One Medium Ball Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Oval Polishing Bob—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. One Medium Pear Polishing Bob—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. One Medium Cone with Flat Tip Polishing Bob—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. One Medium Cone with Round Tip Polishing Bob—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Medium Flat-Edge Buffing Wheels—3/4" Dia. × 1/8" Thick. Four Hard Tapered-Edge Buffing Wheels—3/4" Dia. × 1/8" Thick. One 1/8" Dia. Shank for Buffing Wheels One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish Red Rouge Coloring Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 55 | Hard, Extra Hard | Cutting, Coloring | Three Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Four Extra-Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Flat-Edge Buffing Wheels—1" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 57 | Soft, Medium | Cutting, Coloring | Four Medium Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Medium Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/4" Shank Dia. Four Medium Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Medium Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Medium Flat-Edge Buffing Wheels—1" Dia. × 1/4" Thk. One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 59 | Soft, Medium, Hard, Extra Hard | Cutting, Coloring | Three Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Medium Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Extra-Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Medium Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Extra-Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Medium Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/2" Head Lg. × 1/4" Shank Dia. One 1/2 oz. Extra-Smooth-Finish Brown Tripoli Cutting Compound One 1/2 oz. Polished-Finish Black Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Synthetic Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 35 | Soft | Coloring | Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Four Soft Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four Soft Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Soft Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—7/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 39 | Hard | Cutting, Coloring | Four Hard Cylinder with Flat Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—1/4" Head Dia. × 1/4" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Two Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Four Hard Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Hard Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based Black Cutting Compound One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 51 | Soft, Hard | Cutting, Coloring | Four Hard Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Four Soft Cylinder with Flat Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cylinder with Flat Tip Polishing Bobs—1/2" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Dia. × 1/8" Shank Dia. Three Soft Ball with Round Tip Polishing Bobs—3/8" Head Dia. × 3/8" Head Dia. × 1/8" Shank Dia. Two Hard Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Soft Ball with Round Tip Polishing Bobs—3/4" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Hard Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Three Soft Cone with Round Tip Polishing Bobs—1/2" Head Dia. × 3/4" Head Lg. × 1/8" Shank Dia. Two Hard Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Two Soft Cone with Round Tip Polishing Bobs—3/4" Head Dia. × 1 1/8" Head Lg. × 1/8" Shank Dia. Three Hard Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—5/8" Dia. × 1/4" Thk. Three Soft Flat-Edge Buffing Wheels—7/8" Dia. × 1/4" Thk. One 1/2 oz. Polished-Finish Vegetable-Based Black Cutting Compound One 1/2 oz. Polished-Finish Vegetable-Based White Coloring Compound | Plastic Case | 0000000 | 000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Mold Repair Kits
 |
Keep these kits on hand to repair damaged molds. They come with everything you need to smooth bumps, buff scratches, and shine surfaces.
No. of Pieces | Includes | For Use On | For Finish | Container Type | Each | ||
|---|---|---|---|---|---|---|---|
| 77 | Twenty Aluminum-Oxide Polishing Stones (100-1200 Grit) Nine Silicon-Carbide Polishing Stones (120-1200 Grit) One Polishing Stone Holder One 2 oz. Bottle of Lubricant Three Horse-Hair Polishing Brushes (Cup-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Horse-Hair Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Steel Polishing Brushes (End-Style)—1/4" Brush Dia. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—3/16" Head Dia. × 3/16" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (60 Grit)—1/4" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—1/8" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Aluminum-Oxide Sanding Bits (120 Grit)—7/32" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. One Aluminum-Oxide Belt Sanding Stick (320 Grit) Eleven Birch Wood Lapping Sticks Three 2 gram Syringes of Polished-Finish (2-22 Microns) Diamond Lapping Paste One 50 gram Tube of Mold Polish Three Polishing Bobs (Flat-Tip Cylinder) —1/4" Head Dia. × 3/8" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Round-Tip Cone)—3/8" Head Dia. × 1/2" Head Lg. × 1/8" Shank Dia. Three Polishing Bobs (Bevel-Tip Rectangle)—1/4" Head Wd. × 1" Head Lg. × 1/8" Shank Dia. | Aluminum, Brass, Ceramic, Copper, Iron, Lead, Masonry, Plastic, Tin | Smooth, Extra Smooth, Polished | Plastic Case | 0000000 | 0000000 |
Polishing Bob and Compound Kits for Reciprocating Polishers
 |
Everything you need to polish flat surfaces with a reciprocating polisher. These kits include polishing bobs in different sizes and hardness ratings, along with buffing compounds. The bobs have a flat profile that moves back and forth with the motion of the reciprocating polisher. They’re good for large surfaces or squeezing into narrow, linear spaces. Use the beveled tip to polish at an angle.
Most buffing processes have two steps, cutting and coloring.
1. Cutting removes scratches and surface imperfections.
2. Coloring produces an even finish.
Wool Felt—These bobs absorb and retain compounds better than synthetic felt bobs, so you don't need to reapply as often.
Medium—Balance removing material with leaving a smooth finish.
Hard—For aggressive material removal.
No. of Pieces | Hardness Rating | For Polishing Step | Includes | Container Type | Each | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Wool Felt | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| 26 | Medium, Hard | Cutting, Coloring | Four Medium Rectangle with Bevel Tip Polishing Bobs—1/4" Head Wd. × 1/4" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—1/4" Head Wd. × 1/4" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Rectangle with Bevel Tip Polishing Bobs—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—3/8" Head Wd. × 3/8" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Medium Rectangle with Bevel Tip Polishing Bobs—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. Four Hard Rectangle with Bevel Tip Polishing Bobs—1/2" Head Wd. × 1/2" Head Thk. × 1 1/2" Head Lg. × 1/8" Shank Dia. One 1/2 oz. Smooth-Finish Gray Cutting Compound One 1/2 oz. Polished-Finish White Coloring Compound | Plastic Case | 0000000 | 0000000 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rotary Tool Buffing and Polishing Kits for Dremel Grinders
 |
Buff, polish, and clean with these kits.
No. of Pieces | For Mfr. Model No. | Includes | Each | ||
|---|---|---|---|---|---|
| 20 | 100, 100-N/7, 200, 3000, 3000-1/24, 7760-N/10, 8220, 8220-1/28, 8240, 8250, 8260 | Six Buffing Wheels—1/2" Dia. Five Buffing Wheels—1" Dia. Cup-Style Polishing Brush—1/2" Brush Dia. × 1/8" Shank Dia. End-Style Polishing Brush—1/8" Brush Dia. × 1/8" Shank Dia. Two Wheel-Style Polishing Brushes—3/4" Brush Dia. × 1/8" Shank Dia. Polishing Bob—3/8" Head Dia. Polishing Bob with 1/8" Shank—1/2" Head Dia. Slotted-Head Mandrel—1/8" Shank Dia. Spiral Mandrel—1/8" Shank Dia. Polishing Compound Plastic case | 0000000 | 000000 |
