Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Mount these bumpers on a threaded stud. All are reinforced with a steel core or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

For quick and easy installation, wrap these bumpers around tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. They're also good for providing protection during shipment and storage.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these metric mounts have superior corrosion resistance.

Broader, stronger threads enable faster adjustments and higher load capacities than standard V-shaped threads.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Well-suited to damp environments, these mounts have a stainless steel nut for excellent corrosion resistance.

Use these metric mounts on heavy machines and equipment.

A hex nut at the base of the stud allows for easy height adjustment.

Protect surfaces from scratches and wear.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

These mounts have a cushion on top to provide padding between your furniture and the mount.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

A two-piece design requires less clearance than one-piece mounts and simplifies installation—raise your machine just enough to slide the base underneath, then insert the stud from above.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Great as nonslip feet, thread these rubber suction cups to the bottom of your lightweight equipment.

A swiveling base compensates for angled legs and uneven surfaces.

An integral cushion reduces noise and vibration.

Great for use outdoors, these feet are EPDM rubber, which withstands exposure to direct sunlight.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

A swiveling base compensates for angled legs and uneven surfaces.

A two-piece design makes these mounts easier to install than one-piece mounts.

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.

These mounts withstand exposure to weather and resist oil, antifreeze, and other petroleum-based fluids.

Specifically designed for light vertical loads, these mounts buckle to protect lightweight equipment such as small fans and pumps from vibration.

Designed for tight spaces such as inside machinery, these mounts fit into a cutout, so they so they have a low top profile.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Spring action provides significant isolation of vibration and noise.

Made of nitrile rubber, these mounts are oil resistant for use in compression load applications with punch presses, milling machines, grinders, and air compressors.

Connect these mounts to your air supply for vibration and shock isolation in compression load applications.