5/8"-11 Bumpers | McMaster-Carr

Filter by

System of Measurement

Mount Type

Color

Hardness Rating

Hardness

Height

Base Material

Material

Thread Length

Performance

Low Frequency Vibration Damping

Mount Movement

Mounting Hole Diameter

Thread Depth

RoHS

Compliant with Exemptions

Not Compliant

Capacity per Mount

Less than 1,000 lb.

1,000 lb. to 9,999 lb.

Shape

Round

For Use Outdoors

Yes

Number of Mounting Holes

Overall Height

REACH

Maximum Temperature

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Minimum Temperature

64 Products

Reinforced Threaded-Hole Bumpers

Style 1

With a metal base plate for added strength, these bumpers withstand repeated impacts for a longer service life than all-rubber bumpers. You can also use them as spacers and noise reducers. Twist them onto a threaded stud on your equipment, or pair them with your own stud to create a custom-length bumper.

Multipurpose Neoprene About Multipurpose Neoprene

Style 1

A good choice for oily equipment that's exposed to sunlight, rain, and ozone. These aren't as oil resistant as Buna-N bumpers, but they can be used outdoors.

Hardness Rating—The harder the bumper, the better it withstands impact and abrasion over time. The softer the bumper, the more cushioning it provides for objects made of glass, soft metal, and other fragile materials. Bumpers with a medium rating offer a balance of impact resistance and cushioning.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 40A	Medium Soft	Black	-40 to 200	Steel	No	Yes	0000000	000000


		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 75A	Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000

Abrasion-Resistant Polyurethane Rubber About Abrasion-Resistant Polyurethane Rubber

Style 1

Our toughest rubber bumpers, they keep their shape even when knocked and scraped by metal and other abrasive materials. They're often used on industrial vehicles, conveyors, and heavy construction equipment.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 40A	Medium Soft	Red	-40 to 200	Steel	No	Yes	0000000	000000


		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 50A	Medium	Red	-40 to 200	Steel	No	Yes	00000000	00000
		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 60A	Medium Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000
		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 85A	Hard	Red	-40 to 200	Steel	No	Yes	0000000	00000
		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 95A	Extra Hard	Black	-40 to 200	Steel	No	Yes	00000000	00000

Oil-Resistant Buna-N About Oil-Resistant Buna-N

Style 1

These bumpers resist oil and fuels better than other rubber bumpers. Use them on frequently lubricated machinery and oily equipment, such as engines and pumps.

	Thread
	Size	Dp.	OD	Ht.	Hardness	Hardness Rating	Color	Temp., ° F	Base Plate Material	Nonmarking	For Use Outdoors		Each
Style 1



		5/8"-11	5/8"	1 3/4"	1 5/8"	Durometer 40A	Medium Soft	White	-60 to 175	Steel	Yes	No	00000000	000000

Adjustable Air Springs

Isolate vibration and absorb shock from moving equipment, even with changing loads. Also for leveling and lifting, use compressed air to adjust air springs to the height and force required for your application. They’re often used with vibratory screen and conveyors; loading and transfer stations; and sensitive testing and measuring equipment. Do not extend beyond height at full stroke.

Miniature-Sleeve Air Spring

									Air Inlet			Mount. Hole		Mount. Stud
Ht. @ Full Stroke	Compressed Ht.	Stroke Lg.	Extended Ht.	Full Stroke Lifting Force @ Pressure	Beginning Stroke Lifting Force @ Pressure	OD @ Full Stroke	Temp. Range, ° F	Air Spring Material	Thread Type	Gender	Pipe Size	Thread Size	Dp.	Thread Size	Lg.		Each
4.6"	1.5"	2.1"	3.6"	10 lbf @ 20 psi 40 lbf @ 60 psi 120 lbf @ 100 psi	120 lbf @ 20 psi 360 lbf @ 60 psi 600 lbf @ 100 psi	3.6"	-20 to 135	Neoprene	NPTF	Female	1/8	5/16"-18	7/16"	5/8"-11	1"	0000000	000000

Shock-Absorbing Swivel Leveling Mounts with Threaded Stud

Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Square Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Square Base.

					Base
Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Lg.	Wd.	Overall Ht.		Each
5/8"-11	2 1/2"	350	0.13"	7.5°	3"	3"	3 1/4"	00000000	000000
5/8"-11	2 1/2"	700	0.13"	7.5°	3"	3"	3 1/4"	00000000	00000

Round Neoprene Base with Zinc-Plated Steel Stud

Image of Product. Front orientation. Leveling Mounts. Shock-Absorbing Swivel Leveling Mounts with Threaded Stud, Round Base.

Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Swivel Range of Motion	Base Dia.	Overall Ht.		Each
5/8"-11	2 1/2"	500	0.13"	7.5°	3"	3 1/2"	00000000	000000
5/8"-11	2 1/2"	1,000	0.13"	7.5°	3"	3 1/2"	00000000	00000

Vibration-Damping Swivel Leveling Mounts with Threaded Stud

With Cushion

A rubber cushion reduces vibration to protect components and extend your machine’s life. For mounting versatility, you can install them in either threaded holes or unthreaded through holes at the bottom of equipment.

Zinc-Yellow-Chromate-Plated Steel Base—More corrosion resistant than nickel-plated steel, these mounts are suitable for damp environments. However, they won’t hold up to chemical cleaners, high-pressure washdowns, and other harsh conditions like stainless steel can.

304 Stainless Steel Base—The choice for most wet locations, these mounts can withstand repeated washdowns without corroding. However, they won't hold up to cleaning solutions that contain harsh chemicals like 316 stainless steel can.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

					With Rubber Cushion						With Plastic Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Cap. per Mount, lb.	Deflection @ Cap.	Overall Ht.	Cushion Material		Each	Cap. per Mount, lb.	Deflection @ Cap.	Overall Ht.	Cushion Material		Each
Zinc-Yellow-Chromate-Plated Steel Base and Stud



		5/8"-11	2"	7.5°	2 1/2"	1,800	0.05"	3 7/8"	Neoprene	0000000	000000	4,400	0.06"	3 7/8"	Fiber-Reinforced Nylon	0000000	000000


		304 Stainless Steel Base and Stud



				5/8"-11	4"	7.5°	2 5/8"	500	0.07"	5"	Buna-N	0000000	00000	—	—	—	—	———	0


				5/8"-11	4"	7.5°	3 13/16"	1,000	0.12"	5 7/16"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	4"	7.5°	3 7/8"	2,000	0.12"	5 7/16"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	4"	7.5°	5 1/2"	3,000	0.17"	6"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	4"	7.5°	5 1/2"	4,000	0.17"	6"	Buna-N	0000000	000000	—	—	—	—	———	0
				5/8"-11	6"	7.5°	2 5/8"	500	0.07"	7"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	6"	7.5°	3 13/16"	1,000	0.12"	7 7/16"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	6"	7.5°	3 7/8"	2,000	0.12"	7 7/16"	Buna-N	0000000	00000	—	—	—	—	———	0
				5/8"-11	6"	7.5°	5 1/2"	3,000	0.17"	8"	Buna-N	00000000	000000	—	—	—	—	———	0
				5/8"-11	6"	7.5°	5 1/2"	4,000	0.17"	8"	Buna-N	0000000	000000	—	—	—	—	———	0
				5/8"-11	8"	7.5°	3 7/8"	1,000	0.12"	9 7/16"	Buna-N	00000000	00000	—	—	—	—	———	0


				5/8"-11	8"	7.5°	3 7/8"	2,000	0.12"	9 7/16"	Buna-N	00000000	00000	—	—	—	—	———	0
				5/8"-11	10"	7.5°	3 7/8"	1,000	0.12"	11 7/16"	Buna-N	00000000	000000	—	—	—	—	———	0
				5/8"-11	10"	7.5°	3 7/8"	2,000	0.12"	11 7/16"	Buna-N	00000000	000000	—	—	—	—	———	0

Vibration-Damping Rigid Leveling Mounts with Threaded Hole

The rubber base reduces vibration to protect components and extend your machine's life. The base also cuts down on noise, protects floors from scrapes and gouges, and grips surfaces so vibrating equipment doesn't slide. Add your own stud to create a custom-length mount that levels equipment on uneven floors.

Stainless Steel Plate—These mounts have a stainless steel plate for excellent corrosion resistance.

	Thread Dp.	Cap. per Mount, lb.	Deflection @ Cap.	Base Dia.	Overall Ht.		Each
Polyurethane Rubber Base with Zinc-Plated Steel Plate



	5/8"-11	3/4"	7,000	0.3"	6"	1 1/4"	0000000	0000000


	Polyurethane Rubber Base with Stainless Steel Plate



			5/8"-11	3/4"	7,000	0.3"	6"	1 1/4"	0000000	000000

Seismic Vibration-Damping Mounts

Offset shock and vibration under normal conditions while preventing sheared bolts and other costly damage during an earthquake. With two rows of bolt holes and a steel covering to remain rigid and stable, these mounts withstand 1g of lateral force. Ideal for large industrial machinery, they stay rigid and strong under loads of up to 3,500 pounds.

Multipurpose Neoprene About Multipurpose Neoprene

Steel Base and Cadmium-Plated Steel Bolt—The cadmium adds lubricity so the bolt threads on smoothly and won’t seize or gall if you need to adjust the height of your equipment.

										Base		Mounting
	Thread Size	Cap. per Mount, lb.	Thread Lg.	Deflection @ Cap.	Shear Cap. per Mount, lb.	Deflection @ Shear Cap.	Seismic Rating, g	Temp. Range, ° F	Overall Ht.	Lg.	Wd.	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.		Each
Steel Base and Cadmium-Plated Steel Bolt



		5/8"-11	1,400	1 1/4"	0.15"	400	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	000000


		5/8"-11	2,100	1 1/4"	0.15"	600	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	00000
		5/8"-11	3,500	1 1/4"	0.15"	1,000	0.09"	1	-20 to 225	2.375"	6.25"	3.75"	No	6	0.563"	5", 2.5"	0000000	00000

Shock-Absorbing Air Spring Vibration-Damping Mounts

Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.

Threaded-Insert Mount

Image of Product. Front orientation. Vibration-Damping Mounts. Shock-Absorbing Air Spring Vibration-Damping Mounts.

Multipurpose Neoprene—Resist wear and tear well enough for most applications. They are UV resistant and won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.

								Base			Mounting					Air Inlet
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Ht.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Max. Pressure, psi	Thread Size	Thread Type	Base Material		Each







			Multipurpose Neoprene

			5/8"-11	2,400	1.25"	Not Rated	Not Rated	3.5"	9.66"	2.94"	10"	10"	-20 to 180	No	4	0.56"	8.5"	80	0.305"-32	Schrader	Aluminum	00000000	0000000


			5/8"-11	4,800	1.5"	Not Rated	Not Rated	3.5"	13.31"	2.94"	13.5"	13.5"	-20 to 180	No	4	0.56"	12"	80	0.305"-32	Schrader	Aluminum	00000000	000000

Shock-Absorbing Rigid Leveling Mounts with Threaded Hole

Absorb sudden impacts from heavy machinery, such as punch presses, die cutters, and generators that jolt as they power on. These mounts have a solid rubber base, similar to a hockey puck, that isolates shock to protect floors and equipment from damage. The base also cuts down on noise and grips the floor so equipment doesn't slide when it's vibrating. Add your own stud to create a custom-length mount that levels equipment on uneven surfaces.

Stainless Steel Cover—The choice for most wet locations. The cover protects the base from grease and oil as well as repeated washdowns without corroding.

	Thread Dp.	Cap. per Mount, lb.	Deflection @ Cap.	Base Dia.	Overall Ht.		Each
Neoprene Base with Stainless Steel Cover



	5/8"-11	1"	2,800	0.25"	5 3/16"	1 7/8"	0000000	0000000


	5/8"-11	1"	4,200	0.24"	5 3/16"	1 7/8"	0000000	000000

Stay-Put Sanitary Swivel Leveling Mounts with Threaded Stud

With Cushion

Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

Cap Nuts—Cover and protect exposed threads. These nuts are free of crevices where bacteria can grow and have a silicone seal to keep out contaminants. The seal is metal- and X-ray detectable in case it falls into your line.

	Leveling Mounts															Cap Nuts
						Mounting Holes					With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Swivel Range of Motion	Base Dia.	No. of	Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Food Industry Std.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each		Each
304 Stainless Steel Base and Stud



		5/8"-11	2 7/8"	4" to 5 3/8"	9°	3 1/8"	2	No	11/32"	2 1/4"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	6,800	6 7/8"	Buna-N	0000000	0000000	000000000	000000


		5/8"-11	4 1/8"	5 3/16" to 7 3/4"	9°	3 1/8"	2	No	11/32"	2 1/4"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	5,400	9 1/4"	Buna-N	0000000	000000	000000000	00000

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. All have nylon-insert locknuts, which grip the thread to resist loosening without damaging threads. Use to support heavy pipe, tube, and conduit from ceilings, walls, and poles.

Zinc-Plated Steel—Zinc-plated steel U-bolts have good corrosion resistance in most environments.

316 Stainless Steel— 316 stainless steel U-bolts have excellent corrosion and chemical resistance.

	ID
	Inch	Metric, mm	For Pipe Size	Ht.	Thread Lg.	Wt. Cap., lb.	Ctr.-to-Ctr.	No. of Nuts Included	Temp. Range, ° F		Each
Zinc-Plated Steel







				5/8"-11 Threads

				6"	152	—	8 3/8"	2"	3,600	7 3/4"	2	-65 to 340	00000000	000000


				6.625"	168	6	8 3/4"	2"	3,600	7 3/4"	2	-65 to 340	00000000	00000


				316 Stainless Steel







								5/8"-11 Threads

								6"	152	—	8 3/8"	2"	3,600	7 3/4"	2	-65 to 340	00000000	000000

Stay-Put Swivel Leveling Mounts with Threaded Stud and Offset Hole

One or more offset mounting holes extend from underneath machines to give you more room to drill and install fasteners. These mounts bolt down to secure equipment that doesn’t need to move and prevent it from creeping or tipping. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Round Base


1 Mounting Hole With Cushion	2 Mounting Holes With Cushion

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

					Mounting Holes			With Rubber Cushion
	Thread Size	Thread Lg.	Swivel Range of Motion	Base Dia.	Fasteners Included	Dia.	Ctr.-to-Ctr. Lg.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each
304 Stainless Steel Base and Stud







				1 Mounting Hole

				5/8"-11	4"	5°	2 15/16"	No	19/32"	—	1,770	4 7/8"	Buna-N	0000000	000000


				5/8"-11	4"	5°	3 15/16"	No	19/32"	—	2,220	5 1/4"	Buna-N	0000000	00000
				5/8"-11	6"	5°	2 15/16"	No	19/32"	—	1,770	6 7/8"	Buna-N	0000000	00000
				5/8"-11	6"	5°	3 15/16"	No	19/32"	—	2,220	7 1/4"	Buna-N	0000000	00000




						2 Mounting Holes

						5/8"-11	4"	5°	2 15/16"	No	19/32"	4 1/8"	1,770	4 7/8"	Buna-N	00000000	00000


						5/8"-11	6"	5°	2 15/16"	No	19/32"	4 1/8"	1,770	6 7/8"	Buna-N	00000000	00000

Vibration-Damping Bolt-Down Mounts

Style 6,

Threaded-Insert Mount

These mounts reduce vibration and noise while anchoring machinery from below. Bolt them to the bases of fans, pumps, and generators so vibration from moving components doesn't wear out parts, crack floors, and push equipment out of place.

Style 6—Threaded-Insert Mount

Style 6,

Threaded-Insert Mount

Best for your tightest spaces, these are our lowest-profile, high-capacity mounts. Their arched construction dissipates the heavy thuds of punch presses and other high-impact machinery.

							Base			Mounting						Each
Thread Size	Cap. per Mount, lb.	Deflection @ Cap.	Shear Cap. per Mount	Deflection @ Shear Cap.	Overall Ht.	Dia.	Lg.	Wd.	Temp. Range, ° F	Fasteners Included	No. of Holes	Hole Dia.	Hole Ctr.-to-Ctr.	Base Material		1-24	25-99	100-Up







			Multipurpose Neoprene

			5/8"-11	1,500	0.03"	Not Rated	Not Rated	1.19"	4"	7"	2.5"	0 to 180	No	2	0.66"	5.5"	Steel	00000000	0000000	0000000	0000000


			5/8"-11	3,000	0.03"	Not Rated	Not Rated	1.19"	4"	7"	4"	0 to 180	No	2	0.66"	5.5"	Steel	00000000	000000	000000	000000

Vibration-Damping Swivel Leveling Mounts with Threaded Hole

With Cushion

A rubber cushion reduces vibration to protect components and extend your machine’s life. These mounts have a ball-and-socket joint in the base that swivels to compensate for slightly sloped and pitted floors. Add your own stud to create a custom-length mount that you can install in either threaded holes or unthreaded through holes.

Plastic Cushion—The plastic bottom won't scratch or scuff floors when you’re moving equipment.

Rubber Cushion—In addition to reducing vibration, the cushion grips surfaces so vibrating equipment doesn't slide. It also cuts down on noise and protects floors from scrapes and gouges.

						With Rubber Cushion					With Plastic Cushion
	Thread Size	Thread Dp.	Swivel Range of Motion	Base Dia.	Overall Ht.	Cap. per Mount, lb.	Deflection @ Cap.	Cushion Material		Each	Cap. per Mount, lb.	Deflection @ Cap.	Cushion Material		Each
Zinc-Yellow-Chromate-Plated Steel Base



		5/8"-11	7/16"	7.5°	2 1/2"	1 7/8"	1,800	0.05"	Neoprene	0000000	000000	4,400	0.06"	Fiber-Reinforced Nylon	0000000	000000

Stay-Put Sanitary Swivel Leveling Mounts with Threaded Stud and Offset Hole

With Cushion

Free of crevices where bacteria can grow, these mounts have an extremely smooth finish, rounded edges, and a covered stud. A silicone seal at the base of the thread cover keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. You can also bolt them down so machines don’t creep across the floor or tip over. The mounting hole extends from underneath your machine to give you more room to drill and install fasteners. A ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—A cushion under the base protects floors from scrapes and gouges.

	Leveling Mounts														Cap Nuts
						Mounting Holes				With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Swivel Range of Motion	Base Dia.	Fasteners Included	No. of	Dia.	Food Industry Std.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each		Each
304 Stainless Steel Base and Stud



		5/8"-11	2 7/8"	4 5/16" to 5 11/16"	10°	3 1/8"	No	1	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300	7 3/16"	Buna-N	0000000	000000	000000000	000000


		5/8"-11	4 1/8"	5 1/2" to 8 1/16"	10°	3 1/8"	No	1	19/32"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300	9 9/16"	Buna-N	0000000	00000	000000000	00000

Vibration-Damping Rigid Leveling Mounts with Threaded Stud

Style 1

The rubber base reduces vibration to protect components and extend your machine's life. The base also cuts down on noise, protects floors from scrapes and gouges, and grips surfaces so vibrating equipment doesn't slide. Install these mounts in threaded holes to level equipment on uneven floors. Use a locknut (not included) to install mounts in unthreaded through holes.

	Thread Size	Thread Lg.	Cap. per Mount, lb.	Deflection @ Cap.	Base Dia.	Overall Ht.		Each
Neoprene Base and Zinc-Plated Steel Stud



	1	5/8"-11	2 1/2"	40	0.2"	2 3/16"	3 5/16"	00000000	000000


	1	5/8"-11	2 1/2"	80	0.2"	2 3/16"	3 5/16"	00000000	00000
	1	5/8"-11	2 1/2"	180	0.2"	2 3/16"	3 5/16"	00000000	00000

Sanitary Swivel Leveling Mounts with Threaded Stud

With

Cushion

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. They also have a rubber cushion that reduces vibration to extend your machine’s life. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

With an extremely smooth finish, rounded edges, and a covered stud, these mounts are free of crevices where bacteria can grow. They have a silicone seal at the base of the thread cover that keeps contaminants out. The seal is made with chemical additives, so you can find it with an X-ray machine if it falls into your line. Mounts are certified by 3-A, EHEDG, and USDA to meet sanitary design standards. The ball-and-socket joint in the base swivels to compensate for slightly sloped and pitted floors. For mounting versatility, you can install these mounts in either threaded holes or unthreaded through holes at the bottom of equipment.

Rubber Cushion—A cushion under the base grips surfaces so vibrating equipment doesn't slide. It also protects floors from scrapes and gouges.

	Leveling Mounts											Cap Nuts
							With Rubber Cushion
	Thread Size	Thread Lg.	Mounting Ht.	Swivel Range of Motion	Base Dia.	Food Industry Std.	Cap. per Mount, lb.	Overall Ht.	Cushion Material		Each		Each
304 Stainless Steel Base and Stud



		5/8"-11	3 3/8"	4 1/8" to 5 1/2"	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000	7"	Buna-N	000000	000000	000000000	000000


		5/8"-11	3 3/8"	4 3/8" to 5 11/16"	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300	7 1/4"	Buna-N	000000	00000	000000000	00000
		5/8"-11	3 3/8"	4 3/8" to 5 11/16"	10°	4 1/8"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	4,900	7 1/4"	Buna-N	0000000	00000	000000000	00000
		5/8"-11	4 1/2"	5 5/16" to 7 7/8"	10°	2 9/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	2,000	9 3/8"	Buna-N	000000	00000	000000000	00000
		5/8"-11	4 1/2"	5 1/2" to 8 1/16"	10°	3 3/16"	3-A Certified 88-00, FDA Compliant 21 CFR 177.2600	3,300	9 9/16"	Buna-N	000000	00000	000000000	00000