McMaster-Carr logo
    Filter by
    System of Measurement
    Plain Bearing Type
    Bearing Type
    For Load Direction
    Industrial Info Compare
    Shaft Type
    Lubrication
    U.S.–Mexico–Canada Agreement (USMCA) Qualifying
    DFARS Specialty Metals
    Export Control Classification Number (ECCN)
    Industrial Info Snippet
    Maximum Temperature
    Lubrication Method
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    60 Products
    About Sleeve Bearings
    industrial info icon

    Choose a sleeve bearing that matches your load and speed requirements and that's right for your environment.

    Made-to-Order Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Made-to-Order Oil-Embedded Sleeve Bearings.
    Get the perfect fit with made-to-order sleeve bearings—just send us the dimensions. All are made from porous metal and saturated with oil to reduce maintenance and downtime. Although these bearings will work in most conditions, oil may drip away if temperatures get too high. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    To Order: Please specify ID, OD, and length. The difference between the ID and OD must be at least 0.0625" for inch sizes or 2 mm for metric.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they operate at slower speeds. The increased iron content makes these bearings appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    Choose an ID
    Choose an OD
    Choose a Length
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    0.1250" to 0.3120"0.1875" to 0.5625"0.063" to 0.625"Synthetic Oil-35 to 3006391K7110000000
    0.3125" to 0.7495"0.3750" to 0.9375"0.063" to 1.500"Synthetic Oil-35 to 3006391K712000000
    0.7500" to 1.2495"0.8125" to 1.5000"0.063" to 2.750"Synthetic Oil-35 to 3006391K713000000
    1.2500" to 1.9995"1.3125" to 2.2500"0.063" to 3.000"Synthetic Oil-35 to 3006391K714000000
    2.0000" to 2.9375"2.0625" to 3.0000"0.063" to 4.000"Synthetic Oil-35 to 3006391K715000000
    3.000 mm to 7.995 mm5.000 mm to 14.000 mm2.00 mm to 16.00 mmSynthetic Oil-35 to 3006658K91000000
    8.000 mm to 18.995 mm10.000 mm to 24.000 mm2.00 mm to 38.00 mmSynthetic Oil-35 to 3006658K92000000
    19.000 mm to 31.995 mm21.000 mm to 38.000 mm2.00 mm to 70.00 mmSynthetic Oil-35 to 3006658K93000000
    32.000 mm to 50.995 mm34.000 mm to 57.000 mm2.00 mm to 75.00 mmSynthetic Oil-35 to 3006658K94000000
    51.000 mm to 65.000 mm53.000 mm to 75.000 mm2.00 mm to 100.00 mmSynthetic Oil-35 to 3006658K95000000
     
    High-Load 863 Iron Copper
    0.1250" to 0.3120"0.1875" to 0.5625"0.063" to 0.625"Synthetic Oil-15 to 3002868T985000000
    0.3125" to 0.7495"0.3750" to 0.9375"0.063" to 1.500"Synthetic Oil-15 to 3002868T986000000
    0.7500" to 1.2495"0.8125" to 1.5000"0.063" to 2.750"Synthetic Oil-15 to 3002868T987000000
    1.2500" to 1.9995"1.3125" to 2.2500"0.063" to 3.000"Synthetic Oil-15 to 3002868T988000000
    2.0000" to 2.9375"2.0625" to 3.0000"0.063" to 4.000"Synthetic Oil-15 to 3002868T989000000
     

    Made-to-Order Ultra-Low-Friction Oil-Embedded Sleeve Bearings

    Image of Product. Front orientation. Sleeve Bearings. Made-to-Order Ultra-Low-Friction Oil-Embedded Sleeve Bearings.
    Our slipperiest made-to-order sleeve bearings in whatever size you need—just send us the dimensions. With nonstick PTFE particles added to the oil, they reduce friction to minimize wear and heat, so equipment runs more efficiently and lasts longer. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    Choose an ID
    Choose an OD
    Choose a Length
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    0.1250" to 0.3120"0.1875" to 0.5625"0.063" to 0.625"Synthetic OilPTFE
    		-40 to 3001688K810000000
    0.3125" to 0.7495"0.3750" to 0.9375"0.063" to 1.500"Synthetic OilPTFE
    		-40 to 3001688K82000000
    0.7500" to 1.2495"0.8125" to 1.5000"0.063" to 2.750"Synthetic OilPTFE
    		-40 to 3001688K83000000
    1.2500" to 1.9995"1.3125" to 2.2500"0.063" to 3.000"Synthetic OilPTFE
    		-40 to 3001688K84000000
    2.0000" to 2.9375"2.0625" to 3.0000"0.063" to 4.000"Synthetic OilPTFE
    		-40 to 3001688K85000000
     

    Made-to-Order Oil-Embedded Sleeve Bearings for Food and Beverage

    Image of Product. Front orientation. Sleeve Bearings. Made-to-Order Oil-Embedded Sleeve Bearings for Food and Beverage.
    Get the perfect fit with made-to-order sleeve bearings—just send us the dimensions. These lead-free bearings are infused with a food-grade oil that is odorless, colorless, tasteless, and safe for unintended contact with food. They’re often used in food and beverage processing, packing, and handling equipment. All are made from porous metal and saturated with oil to reduce maintenance and downtime. All are fabricated, lubricated, and inspected in the U.S.
    With no moving parts, sleeve bearings are the simplest way to support the load of a rotating shaft while reducing friction. Also known as plain bearings.
    To Order: Please specify ID, OD, and length. The difference between the ID and OD must be at least 0.0625" for inch sizes or 2 mm for metric.
    841 Bearing Bronze—A classic choice for a starter pick. Also known as SAE 841 bearings.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away at higher temperatures.
    Choose an ID
    Choose an OD
    Choose a Length
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    0.1250" to 0.3120"0.1875" to 0.5625"0.063" to 0.625"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K850000000
    0.3125" to 0.7495"0.3750" to 0.9375"0.063" to 1.500"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K86000000
    0.7500" to 1.2495"0.8125" to 1.5000"0.063" to 2.750"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K87000000
    1.2500" to 1.9995"1.3125" to 2.2500"0.063" to 3.000"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K88000000
    2.0000" to 2.9375"2.0625" to 3.0000"0.063" to 4.000"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.35707095K89000000
     

    Made-to-Order Oil-Embedded Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Made-to-Order Oil-Embedded Thrust Bearings.
    When you can't find the perfect fit, send us the dimensions and we'll have a bearing made for you. These bearings are our simplest to use, with no moving parts and no need to lubricate. Their porous surface releases oil over time, so you can install and forget them.
    To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".
    841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
    High-Load 863 Iron Copper—Iron makes these bearings harder, stronger, and more resistant to sudden starts and stops than 841 bearing bronze. However, they run at slower speeds. The increased iron content also makes them appear silver.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
    Choose an ID
    Choose an OD
    Choose a
    Thickness
    Base Oil
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    0.500" to 2.250"0.750" to 2.500"0.063" to 0.250"Synthetic Oil-35 to 3005906K20000000
     
    High-Load 863 Iron Copper
    0.125" to 0.499"0.500" to 0.749"0.063" to 0.250"Synthetic Oil-15 to 3002879T9100000
    0.500" to 2.250"0.750" to 2.500"0.063" to 0.250"Synthetic Oil-15 to 3002879T92000000
     

    Made-to-Order Ultra-Low-Friction Oil-Embedded Thrust Bearings

    Image of Product. Front orientation. Thrust Bearings. Made-to-Order Ultra-Low-Friction Oil-Embedded Thrust Bearings.
    Our slipperiest metal thrust bearings in whatever size you need—just send us the dimensions. Their oil contains nonstick PTFE particles that reduce wear and heat, extending the life of your equipment. You'll often find them on machines with frequent starts and stops, such as conveyors.
    To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".
    841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
    Choose an ID
    Choose an OD
    Choose a
    Thickness
    Base Oil
    Lubricant
    Additive
    Temp. Range,
    ° F
    Each
    841 Bearing Bronze
    0.125" to 0.499"0.500" to 0.749"0.063" to 0.250"Synthetic OilPTFE
    		-60 to 3007421K35000000
    0.500" to 2.250"0.750" to 2.500"0.063" to 0.250"Synthetic OilPTFE
    		-60 to 3007421K36000000
     

    Made-to-Order Oil-Embedded Thrust Bearings for Food and Beverage

    Image of Product. Front orientation. Thrust Bearings. Made-to-Order Oil-Embedded Thrust Bearings for Food and Beverage.
    Get the perfect fit for your food plant—just send us the dimensions. Infused with food-grade oil, these bearings are safe for incidental contact with food. The oil is odorless, colorless, and tasteless, so they're common on food production and packaging lines. You can install and forget them since their porous surface releases oil over time.
    To Order: Please specify ID, OD, and thickness. The difference between the ID and OD must be at least 0.25".
    841 Bearing Bronze—A balance of strength and speed makes these bearings a good choice for most applications. Also known as SAE 841 bearing bronze.
    Synthetic Oil Base—A high-quality lubricant makes all the difference. Synthetic oil is less sensitive to temperature changes than mineral oil, so it won't get runny and leak away if the bearing heats up.
    Choose an ID
    Choose an OD
    Choose a
    Thickness
    Base Oil
    Temp. Range,
    ° F
    Specs. Met
    Each
    841 Bearing Bronze
    0.125" to 0.499"0.500" to 0.749"0.063" to 0.250"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, NSF Registered H15429T61000000
    0.500" to 2.250"0.750" to 2.500"0.063" to 0.250"Synthetic Oil-75 to 300FDA Compliant 21 CFR 178.3570, NSF Registered H15429T62000000
     

    Made-to-Order Clamping Rigid Shaft Couplings

    When you need a strong hold and even grip on shafts that are oversized due to finishes, undersized from wear, or uncommonly sized, we’ll make a coupling for you that fits just right. Tell us your shaft diameters to the nearest 0.001” or 0.1 mm.
    These couplings clamp around your shafts to prevent marring them. But, you need access to the end of each shaft to slide them into place. Because they’re rigid, they don’t allow movement between shafts, making them good for high-torque jobs. This also means your shafts must align to connect.
    Through-Bore Rigid Shaft Couplings—For Round Shafts
    Image of Product. Front orientation. Rigid Shaft Couplings. Made-to-Order Clamping Rigid Shaft Couplings , For Round Shafts.
    Image of Attribute. Through Bore. Side1 orientation. Contains Annotated. Through Bore. Made-to-Order Clamping Rigid Shaft Couplings .

    Through Bore

    To Order: For through-bore shaft couplings, please specify your shaft diameter in 0.001” or 0.1 mm increments within the range listed.
    Through-bore couplings connect same-size shafts.
    Choose a Shaft
    Diameter
    Overall
    Lg.
    OD
    Material
    Max. Rotation
    Speed, rpm
    Max. Torque,
    in·lbf
    For Rotary Motion
    Each
    0.375" to 0.500"1 7/8"1 1/4"Steel7,500625Forward/Reverse, Start/Stop, Continuous3509N110000000
    0.375" to 0.750"2 5/8"1 3/4"Steel7,5002,540Forward/Reverse, Start/Stop, Continuous3509N12000000
    0.500" to 1.000"3"2"Steel6,5002,670Forward/Reverse, Start/Stop, Continuous3509N13000000
    0.500" to 1.250"3 3/8"2 1/4"Steel5,5003,810Forward/Reverse, Start/Stop, Continuous3509N14000000
    0.750" to 1.500"3 3/4"2 1/2"Steel4,0004,575Forward/Reverse, Start/Stop, Continuous3509N15000000
    0.750" to 1.750"4 1/2"3"Steel4,0008,110Forward/Reverse, Start/Stop, Continuous3509N16000000
    0.750" to 2.000"4 7/8"3 1/4"Steel4,0009,275Forward/Reverse, Start/Stop, Continuous3509N17000000
    9.6 mm to 12.7 mm48 mm32 mmSteel7,500625Forward/Reverse, Start/Stop, Continuous3509N51000000
    9.6 mm to 19.0 mm67 mm44 mmSteel7,5002,540Forward/Reverse, Start/Stop, Continuous3509N52000000
    12.7 mm to 25.4 mm76 mm51 mmSteel6,5002,670Forward/Reverse, Start/Stop, Continuous3509N53000000
    12.7 mm to 31.7 mm86 mm57 mmSteel5,5003,810Forward/Reverse, Start/Stop, Continuous3509N54000000
    19.1 mm to 38.1 mm95 mm64 mmSteel4,0004,575Forward/Reverse, Start/Stop, Continuous3509N55000000
    19.1 mm to 44.4 mm114 mm76 mmSteel4,0008,110Forward/Reverse, Start/Stop, Continuous3509N56000000
    19.1 mm to 50.8 mm124 mm83 mmSteel4,0009,275Forward/Reverse, Start/Stop, Continuous3509N57000000

    Made-to-Order Two-Piece Rigid Shaft Couplings

    For hard-to-access shafts that are oversized from coatings or undersized from wear, we’ll get you a coupling in the right size that clamps on as two pieces, so you don’t need to move your shafts or installed components. Let us know your shaft diameter to the nearest 0.001” or 0.1 mm. These couplings are rigid, making them good for high-torque applications. However, your shafts must be aligned.
    Through-Bore Rigid Shaft Couplings—For Round Shafts
    Image of Product. Front orientation. Rigid Shaft Couplings. Made-to-Order Two-Piece Rigid Shaft Couplings , For Round Shafts.
    Image of Attribute. Through Bore. Side1 orientation. Contains Annotated. Through Bore. Made-to-Order Two-Piece Rigid Shaft Couplings .

    Through Bore

    To Order: For through-bore shaft couplings, please specify your shaft diameter in 0.001” or 0.1 mm increments within the range listed.
    Through-bore couplings connect same-size shafts.
    Choose a Shaft
    Diameter
    Overall
    Lg.
    OD
    Material
    Max. Rotation
    Speed, rpm
    Max. Torque,
    in·lbf
    For Rotary Motion
    Each
    0.375" to 0.500"1 7/8"1 1/4"Steel7,500720Forward/Reverse, Start/Stop, Continuous3499N110000000
    0.375" to 0.750"2 5/8"1 3/4"Steel7,5002,920Forward/Reverse, Start/Stop, Continuous3499N12000000
    0.500" to 1.000"3"2"Steel6,5003,070Forward/Reverse, Start/Stop, Continuous3499N13000000
    0.500" to 1.250"3 3/8"2 1/4"Steel5,5004,380Forward/Reverse, Start/Stop, Continuous3499N14000000
    0.750" to 1.500"3 3/4"2 1/2"Steel4,0005,260Forward/Reverse, Start/Stop, Continuous3499N15000000
    0.750" to 1.750"4 1/2"3"Steel4,0009,330Forward/Reverse, Start/Stop, Continuous3499N16000000
    0.750" to 2.000"4 7/8"3 1/4"Steel4,00010,670Forward/Reverse, Start/Stop, Continuous3499N17000000
    9.6 mm to 12.7 mm48 mm32 mmSteel7,500720Forward/Reverse, Start/Stop, Continuous3499N41000000
    9.6 mm to 19.0 mm67 mm44 mmSteel7,5002,920Forward/Reverse, Start/Stop, Continuous3499N42000000
    12.7 mm to 25.4 mm76 mm51 mmSteel6,5003,070Forward/Reverse, Start/Stop, Continuous3499N43000000
    12.7 mm to 31.7 mm86 mm57 mmSteel5,5004,380Forward/Reverse, Start/Stop, Continuous3499N44000000
    19.1 mm to 38.1 mm95 mm64 mmSteel4,0005,260Forward/Reverse, Start/Stop, Continuous3499N45000000
    19.1 mm to 44.4 mm114 mm76 mmSteel4,0009,330Forward/Reverse, Start/Stop, Continuous3499N46000000
    19.1 mm to 50.8 mm124 mm83 mmSteel4,00010,670Forward/Reverse, Start/Stop, Continuous3499N47000000
    back to top