A plastic cover fully insulates these splices.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

Visually confirm your connection through the inspection window.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

Create a water- and corrosion-resistant seal while connecting two different sizes of wire.

These splices can withstand higher temperatures than insulated splices.

Tighten the screws to connect wires.

Make watertight connections for underground applications.

Insert wires and twist on the threaded end caps. The caps lock wires into place, making these splices a good choice for high-vibration applications.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

For use with a compression tool, these splices are color-coded to match compression dies.

Connect wire without stripping—these splices pierce insulation.

Use these fittings at pressures up to 9,700 psi. Also known as instrumentation fittings, they are made to tight tolerances for use in high-precision applications. They are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings.

Also known as I-line fittings, these quick-clamp fittings permit easy access to your line.

Also known as KF, QF, and NW fittings, these fittings are for high-vacuum applications, such as vacuum coating and heat treating, leak testing, and analyzing gases.

Polished to a 15 Ra and under finish, these fittings have a mirror smooth interior. They are also known as ultra-high-purity fittings.

Fittings have two anti-torque rings that compress the gasket to prevent rotation and reduce particle generation in high-vibration applications.

For high-vacuum systems with tube sizes too large for quick-clamp (KF) fittings, choose these bolt-together fittings.

Use these corrosion-resistant fittings in a low-pressure pipe line.

Unlike other stainless steel fittings, these are made in the U.S.A. for superior quality. As another marker of quality, they come with a certificate with a traceable lot number and test report that guarantees material composition.

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Typically used with standard-wall and low-pressure stainless steel unthreaded pipe fittings.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slip the pipe into the socket and weld.

Typically used with thick-wall and high-pressure stainless steel unthreaded pipe fittings.

Also known as Schedule 10 fittings, these are thin, lightweight, and corrosion resistant.

Also known as Schedule 40, this steel pipe is designed for low-pressure applications.

Typically used with extreme-pressure iron and steel threaded pipe fittings. Also known as Schedule XXH.

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Socket-connect fittings are easier to weld than butt-weld fittings because the fitting doesn't need to align perfectly to the pipe. Slide the pipe into the socket and weld.

Typically used with thick-wall and high-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 80.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Typically used with standard-wall and low-pressure iron and steel unthreaded pipe fittings. Also known as Schedule 40.

Typically used with extreme-pressure iron and steel unthreaded pipe fittings. Pipe is also known as Schedule XXH .

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

Butt-weld fittings allow for a smooth, flush connection that provides maximum flow.

Use these unthreaded flanges in low-pressure applications. Also known as Pressure Class 125 flanges.

Typically used with standard-wall aluminum unthreaded pipe fittings.

Also known as Pressure Class 200 fittings.