McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    45 Products

    Floor-Mount Tracks for Hanging Doors

    Image of System. Front orientation. Contains Annotated. Door Tracks and Fittings. Floor-Mount Tracks for Hanging Doors.
    Image of ProductInUse. Front orientation. Door Tracks and Fittings. Floor-Mount Tracks for Hanging Doors.
    Stop hanging doors from swaying. These tracks and guides (both sold separately) give your door a path to run along the floor for smooth, stable motion. Light spring tension keeps the guides nestled in the track, so they won't jump the track. This system is especially great for making heavy doors glide evenly, but you can also use them with bypassing and folding doors. When you use them with folding doors, the guides swivel to allow the doors to open.
    Use a saw to cut tracks to the length you need. You can mount tracks on top of finished floors or set them into a recess to avoid creating an obstruction or tripping hazard. Secure two guides to the bottom of each door directly under the hangers on the top of the door.
    Lg.,
    ft.
    Wd.
    Ht.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    No. of Mounting
    Holes
    Pkg.
    Qty.
    Pkg.
    Powder-Coated Steel
    101/2"0.375"BlackNo0.218"2227808N120000000
     
    Door Guides

    Track Kits for Bypassing Cabinet Doors

    Image of Product. Front orientation. Contains Border. Door Tracks and Fittings. Track Kits for Bypassing Cabinet Doors, Aluminum.
    Image of Product. Front orientation. Contains Border. Door Tracks and Fittings. Track Kits for Bypassing Cabinet Doors, Plastic.

    Aluminum

    Plastic

    Image of Specification. Front orientation. Contains Border. Beige. Track Kits for Bypassing Cabinet Doors.

    Beige

    Image of Specification. White. Front orientation. Contains Border. White. Track Kits for Bypassing Cabinet Doors.

    White

    Kits include an upper and lower track for hanging lightweight cabinet doors that slide past each other.
    Aluminum—Aluminum tracks have mounting holes for fasteners.
    Plastic—Plastic tracks mount with glue or tape with adhesive on both sides.
    Upper
    Track
    Lower
    Track
    4 ft. Long
    6 ft. Long
    For Door
    Thk.
    Ht.
    Wd.
    Ht.
    Wd.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Each
    Aluminum—For Wood Doors
    1/4"1/2"1 1/4"1/4"1 1/4"No1/8"1720A220000001720A24000000
     
    Plastic—For Glass and Wood Doors
    1/4"9/16"7/8"5/16"7/8"BeigeNo1717A1000001717A300000
     
    Plastic—For Wood Doors
    1/8"9/16"5/8"5/16"5/8"BeigeNo1717A11000001717A1200000
    1/4"9/16"7/8"5/16"7/8"WhiteNo1717A13000001717A1400000
    1/2"9/16"1 3/8"5/16"1 3/8"BeigeNo1717A17000001717A1800000
    3/4"3/4"1 15/16"3/8"1 15/16"BeigeNo1717A15000001717A1600000
     

    Roller Track Kits for Bypassing Doors

    Image of Product. Front orientation. Contains Border. Door Tracks and Fittings. Roller Track Kits for Bypassing Doors, 60 lb. Track Capacity.
    Image of Product. Front orientation. Contains Border. Door Tracks and Fittings. Roller Track Kits for Bypassing Doors, 125 lb. Track Capacity.
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Track Kits for Bypassing Doors, 250 lb. Track Capacity.

    60 lb. Track Capacity

    125 lb. Track Capacity

    250 lb. Track Capacity

    These kits include everything you need to hang two doors that slide past each other. Tracks can be cut to length with a saw. Hangers adjust vertically between the bottom of tracks and the top of the door. Two hangers per door are required.
    Kits
    Additional Hangers
    Vert.
    Adjustment
    Lg.,
    ft.
    For Door Thk.
    Ht.
    Min.
    Max.
    Material
    Mounting Fasteners
    Included
    Each
    Pair
    Each
    60 lb. Track Capacity
    43/4" to 1 3/8"1 1/16"1 1/4"1 9/16"Steel
    Yes1223A1000000———00
    53/4" to 1 3/8"1 1/16"1 1/4"1 9/16"Steel
    Yes1223A200000———00
    63/4" to 1 3/8"1 1/16"1 1/4"1 9/16"Steel
    Yes1223A300000———00
    83/4" to 1 3/8"3 1/8"1 1/8"1 3/8"Steel
    Yes1223A4100000———00
     
    125 lb. Track Capacity
    41 3/8" to 1 3/4"1 3/16"2 1/16"2 11/16"AluminumYes1223A66000001223A101000000
    51 3/8" to 1 3/4"1 3/16"2 1/16"2 11/16"AluminumYes1223A67000001223A10100000
    61 3/8" to 1 3/4"1 3/16"2 1/16"2 11/16"AluminumYes1223A68000001223A10100000
    81 3/8" to 1 3/4"1 3/16"2 1/16"2 11/16"AluminumYes1223A69000001223A10100000
     
    250 lb. Track Capacity
    51 3/8" to 1 3/4"1 7/16"2 3/16"2 11/16"AluminumYes1223A320000001223A550000000
    61 3/8" to 1 3/4"1 7/16"2 3/16"2 11/16"AluminumYes1223A330000001223A55000000
    81 3/8" to 1 3/4"1 7/16"2 3/16"2 11/16"AluminumYes1223A340000001223A55000000
     

    Roller Track Kits for Bypassing Cabinet Doors

    Image of Product. Front orientation. Contains Border. Door Tracks and Fittings. Roller Track Kits for Bypassing Cabinet Doors.
    For smoother operation than standard track kits, these kits include upper and lower roller track. Use them to hang lightweight cabinet doors that slide past each other. To mount, use nails or glue track in place. Height of cabinet door should not exceed twice its width.
    Upper
    Track
    Lower
    Track
    3 ft. Long
    4 ft. Long
    5 ft. Long
    6 ft. Long
    For Door
    Thk.
    Ht.
    Wd.
    Ht.
    Wd.
    Mounting Fasteners
    Included
    Each
    Each
    Each
    Each
    Zinc-Plated Steel—For Glass Doors
    1/4"5/8"15/16"1"1"No1718A50000001718A20000001718A300000001718A40000000
     

    Roller Tracks for Doors

    Image of System. Front orientation. Contains Annotated. Door Tracks and Fittings. Roller Tracks for Doors.
    Combine tracks, mounting brackets, hangers, and end stops to create a system for hanging doors.
    Door stops (not included) mount on the floor to keep sliding doors and panels from damaging walls and door frames.
    Wall-Mount Brackets
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Wall-Mount Brackets, Support Brackets with Center Stop.
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Wall-Mount Brackets, Double-Track-Support Brackets.
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Wall-Mount Brackets, Joint Brackets.
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Wall-Mount Brackets, Double-Track-Joint Brackets.

    Support Brackets

    with Center Stop

    Double-Track-Support

    Brackets

    Joint Brackets

    Double-Track-Joint

    Brackets

    Wall-mount brackets wrap around the outside of tracks and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
    Support Bracket—Support brackets mount the tracks in the desired location.
    Double-Track-Support Brackets—Double-track support brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
    Joint Brackets—Joint brackets join two pieces of track together to create longer runs. Tabs on the top of the brackets slot into pockets in the adjoining track. Joint brackets also act as support brackets.
    Double-Track-Joint Brackets—Double-track joint brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
    Center Stop—Brackets with a center stop provide support and a door stop at the center for bi-parting door installations.
    Powder-Coated Steel—Powder-coated steel components are durable, so they resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Ht.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Support Brackets with Center Stop
     
    Powder-Coated Steel
    4001 3/4"7 15/16"BeigeNo7/16"1207A6390000000
    4001 3/4"7 15/16"BlackNo7/16"1207A641000000
    6002 1/4"10 3/8"BeigeNo9/16"1207A642000000
    8002 5/8"10 1/2"BeigeNo9/16"1207A643000000
     
    Galvanized Steel
    4001 3/4"7 15/16"No7/16"1207A645000000
     
    Zinc-Plated Steel
    6002 1/4"10 3/8"No9/16"1207A646000000
     
    Double-Track-Support Brackets
     
    Powder-Coated Steel
    4001 3/4"8"BeigeNo7/16"1207A13100000
    4001 3/4"8"BlackNo7/16"1207A63400000
     
    Galvanized Steel
    4001 3/4"8"No7/16"1207A13400000
     
    Joint Brackets
     
    Zinc-Plated Steel
    1,0002 5/8"7 5/16"No11/16"1207A638000000
     
    Double-Track-Joint Brackets
     
    Powder-Coated Steel
    4001 3/4"8"BeigeNo7/16"1207A13300000
     
    Galvanized Steel
    4001 3/4"8"No7/16"1207A13600000
     
    Wall-Mount Brackets with Debris Cap
    Image of Product. Front orientation. Door Tracks and Fittings. Roller Tracks for Doors, Brackets, Wall Mount, Caps, Double-Track-Support Brackets.

    Double-Track-Support

    Brackets

    Brackets with a debris cap keep dirt and debris out of tracks and rollers. They will not prevent the hanger from rolling off tracks.
    Wall-mount brackets wrap around the outside of tracks and mount to the wall to act as supports and joints. They can be mounted on any vertical surface, such as above doorways. Brackets are required every 2 ft. of track.
    Double-Track-Support Brackets—Double-track support brackets hold two parallel tracks for bypassing doors. Bypassing door systems are often used if there isn’t space on one side of the door to fit a full-size door.
    Powder-Coated Steel—Powder-coated steel components are durable, so they resist wear and tear over time.
    Galvanized Steel—Galvanized steel components have better corrosion resistance in wet environments than powder-coated steel components, so they are the better choice for use outdoors.
    For Track
    Cap., lb.
    For Inside
    Track Wd.
    Ht.
    Color
    Mounting Fasteners
    Included
    Mounting
    Hole Dia.
    Each
    Double-Track-Support Brackets
     
    Powder-Coated Steel
    4001 3/4"8"BeigeNo7/16"1207A132000000
     
    Galvanized Steel
    4001 3/4"8"No7/16"1207A13500000
     
    back to top