Cable-Pull Switches

Filter by

Actuator Style

System of Measurement

Switching Voltage

Switch Action

Switching Current

Switch Type

Number of Terminals

Switch Designation

Wire Connection

Width

Number of Circuits Controlled

Switch Starting Position

Conduit Connection Gender

Conduit Thread Type

Conduit Trade Size

Depth

DFARS Compliance

Height

Mounting Hole Diameter

Number of Mounting Holes

RoHS Compliance

Housing Material

Certification

Forward

How can we improve?

11 Products

Overhead Rope-Pull Switches

Pull the hanging rope in any direction to actuate these switches. They're rated NEMA 4 for protection against washdowns.

For technical drawings and 3-D models, click on a part number.

With Screw Terminals
Rope Lg., ft.	No. of Circuits Controlled	Switch Starting Position	Switch Action	No. of Terminals	Industry Designation	Switching Current @ Voltage	Max. Voltage	Actuation Force, lbs.	Conduit Trade Size	Mounting Fasteners Included		Each
15	2	1 Off (Normally Open) and 1 On (Normally Closed)	Springs Back (Momentary)	4	DPST-1NO/1NC	6 A @ 120 V AC, 3 A @ 240 V AC, 0.6 A @ 125 V DC	600V AC 600V DC	5	1/2	Yes	0000000	0000000

Cable-Pull Emergency Stop Switches

One Direction

One Direction with Power and Tension Indicator

Two Direction

Immediately cut power by pulling a cable. All have positive force, snap open contacts that will open the circuit when actuated even if a spring fails or the contacts stick. Cables must be held in position under tension.

Two-direction switches can be used with tension springs (sold separately) to open contacts and stop machinery if the cable breaks.

Switches with power indicator illuminate when the cable has been pulled.

Switches with tension indicator make it easier to set the correct cable tension.

Accessory kits (sold separately) simplify the installation of a new switch.

For technical drawings and 3-D models, click on a part number.

Switches
									Mounting					Accessory Kits
For Max. Cable Lg., ft.	No. of Circuits Controlled	Switch Starting Position	No. of Terminals	Industry Designation	Switching Current @ Voltage	Max. Voltage	Actuation Force, lbs.	Conduit Trade Size	Fasteners Included	No. of Holes	Hole Dia.		Each	Includes		Each
With Screw Terminals
1 Direction (IP65, NEMA 4)
15	1	1 Off (Normally Open) and 1 On (Normally Closed)	4	DPST-1NO/1NC	10 A @ 120 V AC	400V AC	18	1/2	No	4	1/4"	00000000	0000000	Cable, Clamps, Tension Screws, Thimbles	00000000	0000000
30	1	1 Off (Normally Open) or 1 On (Normally Closed)	3	SPDT	10 A @ 120 V AC	380V AC	27	1/2	No	4	1/4"	00000000	000000	Cable, Clamps, Tension Screws, Thimbles	00000000	000000
75	2	2 Off (Normally Open) or 2 On (Normally Closed)	6	DPDT	10 A @ 120 V AC	380V AC	45	1/2	No	4	1/4"	00000000	000000	Cable, Clamps, Tension Screws, Thimbles	00000000	000000
1 Direction with Power Indicator and Tension Indicator (IP67, NEMA 4, NEMA 13)
250	1	1 Off (Normally Open) or 1 On (Normally Closed)	3	SPDT	6 A @ 120 V AC	300V AC	40	1/2	No	4	1/4"	00000000	000000	__	000000	00
2 Direction (IP67)
165	2	1 Off (Normally Open) and 1 On (Normally Closed)	4	DPST-1NO/1NC	1.1 A @ 120 V AC	240V AC	5	3/4	No	2	5/16"	00000000	000000	Cable, Clamps, Eyebolts, Tension Screws, Tension Springs	00000000	000000

Connect these switches to a cable to control circuits from a distance. They're typically used to turn off production lines and material handling systems. Equipment will not start up again until switch is manually reset. Mount in any position.

For technical drawings and 3-D models, click on a part number.

With Screw Terminals
No. of Circuits Controlled	Switch Starting Position	Switch Action	No. of Terminals	Industry Designation	Switching Current @ Voltage	Max. Voltage	Actuation Force, lbs.	Conduit Trade Size	Mounting Fasteners Included		Each
1	1 On (Normally Closed)	Stays Switched (Maintained)	2	SPST-NC	6 A @ 120 V AC, 3 A @ 240 V AC; 0.6 A @ 125 V DC	600V AC 600V DC	2-6	1/2	Yes	0000000	0000000