Fold the ring handle into the recess to stay out of the way when not in use. It lays flat so you won’t bump into these latches or catch clothes on them. The latches project further into enclosures than other latches without a recess. To open them, pull the ring with your finger. Turn the head a quarter turn to lock, then turn it another quarter turn to create compression. The second turn also reduces rattling from vibration.

Also known as compression cam latches, these latches create a tighter hold than traditional cam latches, making them useful for doors that have a seal. A gasket helps keep low-pressure washdowns and dust from entering through the latch. This helps you maintain your sealed enclosure's IP or NEMA rating. Made of stainless steel, these latches won’t rust in areas that are constantly exposed to moisture.

All of these latches include multiple cams with an adjustable latching distance. They handle a wide range of latching distances, so they’re best for tasks when precise distances are unknown. Adjust the position of the cam before you begin to install them. The latch installation hole can be made with a round hole instead of the irregularly shaped standard cam hole. This is especially helpful if the material of the door is difficult to cut or part of an existing structure.

For technical drawings and 3-D models, click on a part number.

Grip and turn the ring handle to open and close doors and drawers, then fold it out of the way when you are done. Also known as quarter-turn latches, these latches have an arm that rotates 90° to secure enclosures. They come with a reversible offset cam that has an adjustable latching distance. Best for tasks when precise distances are unknown, they handle a wide range of latching distances. Adjust the position of the cam before you begin to install them.

For technical drawings and 3-D models, click on a part number.

The ring handle is recessed to stay out of the way when not in use. This latch arrives ready for single-point latching; for more holding power, add a latch kit for two-point latching or two latch kits for three-point latching (latch kits sold separately). Select the turn direction of the latches when mounting the cam.

Multiple-point latch kits have a rod, two bushings, and two rod guides.

For technical drawings and 3-D models, click on a part number.