Canvas-Bonding Adhesives

Filter by

Container Type

Aerosol Can

Applicator-Top Bottle

For Joining

For Use On

Hard-to-Bond Materials

Color

Manufacturer

Consistency

Begins to Harden

Adhesive Type

Manufacturer Model Number

Type

Formulation

Maximum Temperature

Reaches Full Strength

Clarity

Mixing Required

Material

REACH

RoHS

Minimum Temperature

U.S.–Mexico–Canada Agreement (USMCA) Qualifying

Yes

Export Control Classification Number (ECCN)

EAR99

DFARS Specialty Metals

Exempt

Viscosity

Less than 1,000 cP

1,000 cP to 9,999 cP

10,000 cP to 19,999 cP

20,000 cP to 99,999 cP

100,000 cP or greater

Peel Strength

75 Products

Contact Adhesives


Can	Applicator-Top Can

Apply these adhesives on two surfaces, air dry, and then bring together to bond.

Cannot Be Sold To—Adhesives that cannot be sold to the regions listed exceed local regulatory limits on VOCs (volatile organic compounds).

		Container
	Mfr. Model No.	Size	Type	Begins to Harden, min.	Reaches Full Strength	Shear Strength, psi	Cure Type	Consistency	Viscosity, cP	Temp. Range, ° F	Color	For Joining	Cannot Be Sold To		Each
3M



		1099	32 fl. oz.	Can	40	72 hr.	3,405	Room Temperature	Thick Liquid	3,000	-10 to 230	Beige	Fabric, Foam, Plastic, Rubber	—	75285A68	000000


		1099	1 gal.	Can	40	72 hr.	3,405	Room Temperature	Thick Liquid	3,000	-10 to 230	Beige	Fabric, Foam, Plastic, Rubber	—	75285A73	000000
		4475	32 fl. oz.	Can	10	72 hr.	Not Rated	Room Temperature	Thick Liquid	8,500	-10 to 230	Clear	Ceramic, Fabric, Glass, Plastic, Rubber	Alexandria, VA; Arlington County, VA; Connecticut; Delaware; District of Columbia; Fairfax County, VA; Fairfax, VA; Falls Church, VA; Los Angeles County, CA; Loudoun County, VA; Maine; Manassas Park, VA; Manassas, VA; Maryland; Massachusetts; New Jersey; New York; Orange County, CA; Pennsylvania; Prince William County, VA; Rhode Island; Riverside County, CA; San Bernardino County, CA; Stafford County, VA; Utah; Vermont	75285A65	000000


		Pliobond



				35	8 fl. oz.	Applicator-Top Can	3	14 day	1,200	Room Temperature	Thick Liquid	6,500	-40 to 370	Beige	Cardboard, Fabric, Foam, Wood	—	7468A53	00000


				35	16 fl. oz.	Can	3	14 day	1,200	Room Temperature	Thick Liquid	6,500	-40 to 370	Beige	Cardboard, Fabric, Foam, Wood	—	7468A54	00000
				35	32 fl. oz.	Can	3	14 day	1,200	Room Temperature	Thick Liquid	6,500	-40 to 370	Beige	Cardboard, Fabric, Foam, Wood	—	7468A51	00000
				35	1 gal.	Can	3	14 day	1,200	Room Temperature	Thick Liquid	6,500	-40 to 370	Beige	Cardboard, Fabric, Foam, Wood	—	7468A52	000000


				Other Contact Adhesives



						—	4 fl. oz.	Applicator-Top Can	2	24 hr.	Not Rated	Room Temperature	Thin Liquid	1,200	-30 to 150	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	—	7507A1	00000


						—	8 fl. oz.	Applicator-Top Can	2	24 hr.	Not Rated	Room Temperature	Thin Liquid	1,200	-30 to 150	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	—	7507A2	00000
						—	16 fl. oz.	Applicator-Top Can	2	24 hr.	Not Rated	Room Temperature	Thin Liquid	1,200	-30 to 150	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	—	7507A3	00000
						—	32 fl. oz.	Applicator-Top Can	2	24 hr.	Not Rated	Room Temperature	Thin Liquid	1,200	-30 to 150	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	7507A4	00000
						—	1 gal.	Can	2	24 hr.	Not Rated	Room Temperature	Thin Liquid	1,200	-30 to 150	Clear	Copper, Fabric, Foam, Rubber, Steel, Wood	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	7507A5	000000

Spray Contact Adhesives

Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to form strong bonds.

Cannot Be Sold to California—Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

		Container													Each
	Mfr. Model No.	Net Wt., oz.	Type	Approx. Coverage @ Application Density	Inverted Dispensing	Begins to Harden	Reaches Full Strength, hr.	Shear Strength, psi	Cure Type	Temp. Range, ° F	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M



		74	16.9	Aerosol Can	26 ft² @ 2.5 g/ft²	No	30 sec.	24	200	Room Temperature	0 to 200	Clear	Fabric, Foam	California	7610A36	000000	000000


		74	16.9	Aerosol Can	26 ft² @ 2.5 g/ft²	No	30 sec.	24	200	Room Temperature	0 to 200	Orange	Fabric, Foam	California	7610A15	00000	00000
		74CA	19	Aerosol Can	29 ft² @ 2.5 g/ft²	No	30 sec.	24	200	Room Temperature	0 to 200	Clear	Fabric, Foam	—	7610A41	00000	00000
		74CA	19	Aerosol Can	29 ft² @ 2.5 g/ft²	No	30 sec.	24	200	Room Temperature	0 to 200	Orange	Fabric, Foam	—	7610A35	00000	00000
		77	13.44	Aerosol Can	21 ft² @ 2.5 g/ft²	No	15 sec.	24	300	Room Temperature	0 to 150	Clear	Cardboard, Ceramic, Composite, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	California	7610A37	00000	00000
		77	16.8	Aerosol Can	26 ft² @ 2.5 g/ft²	No	15 sec.	24	300	Room Temperature	0 to 150	White	Cardboard, Ceramic, Composite, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	California	7610A11	00000	00000
		77CA	18	Aerosol Can	28 ft² @ 2.5 g/ft²	No	15 sec.	24	300	Room Temperature	0 to 150	Clear	Cardboard, Ceramic, Composite, Fabric, Foam, Glass, Metal, Plastic, Rubber, Wood	—	7610A31	00000	00000
		94ET	19.8	Aerosol Can	31 ft² @ 2.5 g/ft²	No	10 min.	24	300	Room Temperature	0 to 210	Clear	Ceramic, Composite, Glass, Metal, Plastic	—	7610A42	00000	00000

Temporary Positioning Spray Glue

Spray a coating of this glue onto one surface to temporarily hold small parts. It forms a strong bond, but will not harden completely until 24 hours later.

	Container						Temp., ° F
	Net Wt., oz.	Type	Approx. Coverage @ Application Density	Begins to Harden, min.	Reaches Full Strength, hr.	Shear Strength	Min.	Max.	Color	For Joining		Each
Gorilla Glue



		14	Aerosol Can	400 ft² @ 1 g/ft²	5	24	Not Rated	50	90	Clear	Fabric, Metal	7610A43	000000

Waterproof Epoxy Structural Adhesives

Syringe

Even when used underwater, these adhesives maintain their strength. Epoxies are the strongest and most chemical-resistant adhesives. They bond especially well on metal.

These epoxies come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Paste—Thicker than liquid adhesives but still spreadable—good for filling gaps and covering surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
J-B Weld







				MarineWeld

				50172	0.85	Syringe	5	1	1,800	Not Rated	1:1	Paste	100,000	-20 to 300	Composite, Glass, Masonry, Metal, Plastic, Rubber, Wood	7605A7	000000

Flexible Instant-Bond Adhesives

Create bonds that can bend without breaking. These adhesives remain elastic even after hardening.

Apply an accelerator first to reach a full-strength bond faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

Thick Liquid—Fill larger gaps than thin-liquid adhesives, so they're better for bonding slightly misaligned or uneven surfaces.

ISO 10993—Comply with biocompatibility standards for medical-grade applications.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Elongation	Temp. Range, ° F	Specs. Met	For Joining		Each
Loctite®



		4851	0.7	Bottle	20	24	Thin Liquid	380	0.006"	85%	-65 to 120	ISO 10993	Composite, Fabric, Metal, Plastic, Rubber	74795A73	000000


		4861	0.7	Bottle	20	24	Thick Liquid	4,250	0.008"	85%	-65 to 120	ISO 10993	Composite, Fabric, Metal, Plastic, Rubber	74795A74	00000

Glue

Use these glues for general purpose bonding and repairs.

Glue Sticks

Container							Each		Package
Net Wt., oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Max. Temp., ° F	Color	For Joining		Each	Pkg. Qty.		Pkg.
0.77	Stick	10	12	150	Clear	Cardboard, Fabric	66285A74	00000	6	66285A84	000000

3M Glue in Aerosol Cans

Cannot Be Sold to California—3M glue cannot be sold to California due to local regulatory limits on VOCs (volatile organic compounds).

	Container								Each		Package
Mfr. Model No.	Net Wt., oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Max. Temp., ° F	Color	For Joining	Cannot Be Sold To		Each	Pkg. Qty.		Pkg.
27	13	Aerosol Can	15	24	140	Clear	Fabric, Metal, Plastic, Rubber, Wood	California	7610A253	000000	12	7610A553	0000000

Glue Shapes

These small tabs of pressure-sensitive adhesive offer convenient, no-mess bonding.

Discs

Dia.	Thk.	Consistency	Temp. Range, ° F	Color	For Joining	Pkg. Qty.		Pkg.
3/8"	0.014"	Gel	20 to 140	Yellow	Ceramic, Fabric, Wood	1,000	7187A33	000000

Hot Glue Sticks

When heated, these glue sticks melt and quickly begin to harden. Use them to seal packaging and form other low- to medium-strength bonds.

Adhesives that take longer to harden are suited for applications that require some repositioning, because the longer open times allow for more adjustment. For high-volume applications, adhesives with a lower viscosity flow faster than other hot-melt adhesives.

3M Scotch-Weld

Image of Product. Front orientation. Hot Glue. Hot Glue Sticks.

3M glue sticks work only with 3M glue guns.

Model Number 3792LM—3792LM are low-temperature formulations, which work well on delicate or heat-sensitive materials.

Mfr. Model No.	For 3M Gun Model No.	Dia.	Lg.	Begins to Harden, sec.	Reaches Full Strength, hr.	Application Temp. Range, ° F	Consistency	Viscosity, cP	Elongation	Color	For Joining	Approx. No. of Sticks per lb.		1 lb.	11 lb.
3792LM	EC, TC/TC-Q LT	5/8"	8"	40	24	250 to 270	Thick Liquid	10,500	400%	Clear	Fabric, Plastic, Rubber, Wood	15	7464A79	000000	0000000
3792LM	LT, TC/TC-Q LT	5/8"	2"	40	24	250 to 270	Thick Liquid	10,500	400%	Clear	Fabric, Plastic, Rubber, Wood	55	7464A78	00000	000000

Adhesive Accelerators for Instant-Bond Adhesives

Applicator-Top

Bottle, Spray

Bottle

Shorten the time it takes instant-bond adhesives to reach full strength. Apply these accelerators before bonding with instant-bond adhesives for strength, or after bonding to keep adhesive from turning cloudy.

Model Number 87937—Scotch-Weld Model Number 87937 also works as a primer on porous materials. Bottles include both a brush and spray head for easy dispensing.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Consistency	Viscosity, cP	Color		Each
3M Scotch-Weld



		87937	2	Applicator-Top Bottle, Spray Bottle	Thin Liquid	10	Amber	75445A83	000000

Cement for Abrasive Grains

Coat cotton, canvas, and felt buffing wheels with this cement, then apply abrasive grains.

Container						Temp.
Size, gal.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Consistency	Viscosity	Min.	Max.	Color	For Joining		Each
1	Pail	30	24	Thin Liquid	Not Rated	Not Rated	Not Rated	Brown	Fabric	4796A1	000000

Contact Adhesives for Sanding Abrasives

Stick sanding discs or sheets to the backup pad on your sander. Also known as disc cement, these adhesives are strong enough to hold discs in place during aggressive sanding, but flexible enough that you can peel them off when you’re done. They work with either paper- or cloth-backed discs, but only use them on backup pads made for pressure-sensitive adhesive (PSA) discs or sheets.

	Container
For Abrasive Backing Material	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Shear Strength	Cure Type	Consistency	Color		Each



	Fabric, Paper	32	Can	10	30	Not Rated	Room Temperature	Thick Liquid	Off-White	8641N11	000000

Epoxy Structural Adhesives

Syringe

Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

7524A161 is solvent free. If the adhesive hardens in the tube, soften in warm water before dispensing.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel, lbf/in. wd.	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
Devcon







				2 Ton Epoxy

				14310	0.84	Syringe	8	16	2,250	2	1:1	Thick Liquid	8,000	-40 to 200	Composite, Metal, Plastic, Metal to Composite, Metal to Plastic, Plastic to Composite	7541A77	000000

Flexible Hot Glue Sticks

Remaining flexible after curing, these glue sticks accommodate joint movement. All are FDA compliant 21 CFR 175.105 and suitable for food packaging.

Dia.	Lg.	Begins to Harden, sec.	Reaches Full Strength, hr.	Application Temp. Range, ° F	Consistency	Viscosity, cP	Elongation	Color	Food Industry Std.	For Joining	Approx. No. of Sticks per lb.		1 lb.	5 lb.	25 lb.
7/16"	10"	60	24	350 to 390	Thick Liquid	5,375	1,300%	Clear	FDA Compliant 21 CFR 175.105	Ceramic, Fabric, Glass, Masonry, Metal, Plastic, Rubber, Wood	18	7518A51	000000	000000	0000000

High-Strength Spray Contact Adhesives

Form bonds with twice the strength of our other spray contact adhesives. Spray a thin, uniform coat of adhesive on one or both surfaces, air dry, and then bring together to adhere.

Cannot Be Sold to California—Adhesives that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

								Temp., ° F						Each
	Mfr. Model No.	Container Net Wt., oz.	Approx. Coverage @ Application Density	Inverted Dispensing	Begins to Harden, sec.	Reaches Full Strength, hr.	Shear Strength, psi	Min.	Max.	Color	For Joining	Cannot Be Sold To		1-11	12-Up
3M



		90	12.23	19 ft² @ 2.5 g/ft²	No	60	24	600	0	250	Clear	Ceramic, Composite, Glass, Metal, Plastic, Rubber	California	7610A39	000000	000000

Impact-Resistant Instant-Bond Adhesives

Mixed with rubber for resilient bonds that withstand sudden stress, shock, and vibration.

Apply an accelerator first to reach a full-strength bond faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	For Joining		Each
Loctite®



		438	0.7	Bottle	30	24	Thin Liquid	180	0.006"	-65 to 220	Cardboard, Composite, Fabric, Metal, Plastic, Rubber, Wood	74765A24	000000

Quick-Set Contact Adhesives

Bonds reach full strength in 10 minutes. Apply adhesive to one or both surfaces, then bring together to bond. For nonporous surfaces, air dry before bonding.

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container
	Mfr. Model No.	Size, gal.	Type	Begins to Harden, sec.	Reaches Full Strength, min.	Shear Strength, psi	Cure Type	Consistency	Viscosity, cP	Temp. Range, ° F	Color	For Joining		Each
3M



		1000NF	1	Jug	60	10	400	Room Temperature	Thin Liquid	750	60 to 80	Purple	Fabric, Foam, Wood	75285A12	0000000

Skin-Safe Instant-Bond Adhesives

Protect your skin and prevent glue burns when making quick, permanent bonds. These adhesives bond instantly to a variety of materials, but they won't begin to harden on skin right away.

Apply an accelerator first to reach a full-strength bond faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

Container
Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	For Joining		Each



	0.07	Tube	10	24	Thin Liquid	40	0.006"	-65 to 160	Ceramic, Fabric, Metal, Plastic, Rubber, Wood	66185A11	00000

Urethane Structural Adhesives

Syringe

Urethanes are the most flexible adhesives, so they bond dissimilar materials and damp vibration.

Some of these adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, hr.	Shear, psi	Peel	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
J-B Weld







				Plastic Bonder

				50139	0.85	Syringe	6	1	1,000	Not Rated	1:1	Thick Liquid	50,000	-20 to 250	Composite, Masonry, Metal, Plastic, Rubber, Wood, Metal to Composite, Metal to Plastic, Metal to Rubber, Plastic to Composite, Plastic to Masonry, Plastic to Rubber, Rubber to Composite, Rubber to Masonry	7605A6	00000

Quick-Set Instant-Bond Adhesives

Bottle

Minimize downtime during joint assembly and repair. These adhesives form bonds in five seconds or less—up to 15 times faster than standard instant-bond adhesives.

Apply an accelerator first to reach a full-strength bond even faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	Specs. Met	For Joining		Each
3M Scotch-Weld



		SF100	0.1	Tube	4	24	Thin Liquid	80	0.006"	-65 to 180	Fed. Spec. A-A-3097	Fabric, Plastic, Rubber, Wood	75445A24	00000


		SF100	0.7	Bottle	4	24	Thin Liquid	80	0.006"	-65 to 180	Fed. Spec. A-A-3097	Fabric, Plastic, Rubber, Wood	75445A25	00000

Quick-Set Wicking Instant-Bond Adhesives

Bottle

Bond parts that are already installed in half the time of our other wicking instant-bond adhesives. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.

Apply an accelerator first to reach a full-strength bond faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	Specs. Met	For Joining		Each
Loctite®



		4501	0.7	Bottle	5	24	Thin Liquid	20	0.004"	-65 to 180	—	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74795A72	000000


		3M Scotch-Weld



				SF20	0.7	Bottle	4	24	Thin Liquid	20	0.004"	-65 to 180	Fed. Spec. A-A-3097	Fabric, Plastic, Rubber, Wood	75445A23	00000

Surface Fillers for Canvas and Leather

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric. Made with latex, these surface fillers stay flexible after curing, so they won't crack on materials that bend and stretch during use.

	Container							Temp. Range, ° F
	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength, min.	Consistency	Mixing Req.	For Use Outdoors	Min.	Max.	Color	For Use On		Each
Latex Surface Fillers



		6	Bottle	3	30	Thin Liquid	No	Yes	35	210	Beige	Leather, Canvas, Acrylic Fabric	7540A11	000000


		16	Bottle	3	30	Thin Liquid	No	Yes	35	210	Beige	Leather, Canvas, Acrylic Fabric	7540A12	00000

Wicking Instant-Bond Adhesives

Bottle

Create secure bonds between parts that are already installed. Our thinnest adhesives use capillary action to pull themselves deep into close-fitting seams—like water up the roots of a tree.

Apply an accelerator first to reach a full-strength bond faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	For Joining		Each
Loctite®



		406	0.7	Bottle	15	24	Thin Liquid	20	0.004"	-65 to 250	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A32	000000


		406	16	Bottle	15	24	Thin Liquid	20	0.004"	-65 to 250	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A37	000000

Adhesive Primers for Instant-Bond Adhesives


Can	Applicator-Top Bottle, Spray Bottle

Improve instant-bond adhesive performance on hard-to-bond slippery plastics.

Applicator-Top Bottle—Adhesive primers in applicator-top bottles also include a spray head for easy dispensing.

Cannot Be Sold To—These adhesive primers cannot be sold to the areas listed because they exceed local regulatory limits on VOCs (volatile organic compounds).

Certificates with a traceable lot number and product shelf life are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Drying Time, sec.	Consistency	Viscosity, cP	Color	Cannot Be Sold To		Each
Loctite® Adhesive Primers



		7701	1.75	Applicator-Top Bottle, Spray Bottle	30	Thin Liquid	1	Clear	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	7614A34	000000


		770	1.75	Applicator-Top Bottle, Spray Bottle	30	Thin Liquid	1	White	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	66205A24	00000
		770	16	Can	30	Thin Liquid	1	White	Los Angeles County, CA; Orange County, CA; Riverside County, CA; San Bernardino County, CA	66205A36	00000

High-Temperature Glue


Bottle	Pail

This high-temperature glue sticks quickly, but can be repositioned for up to 2 hours before it begins to harden. Glue can be applied and allowed to dry, then reactivated with water when ready for bonding.

Cannot Be Sold to Canada—Glue cannot be sold to Canada due to import regulations.

Container					Temp., ° F
Size	Type	Begins to Harden, hr.	Reaches Full Strength, hr.	Consistency	Min.	Max.	Color	For Joining	Cannot Be Sold To		Each



	32 fl. oz.	Bottle	2	12	Thick Liquid	-30	500	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	7466A7	000000


	1 gal.	Pail	2	12	Thick Liquid	-30	500	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	7466A8	000000
	5 gal.	Pail	2	12	Thick Liquid	-30	500	Beige	Cardboard, Fabric, Glass, Metal, Wood	Canada	7466A9	000000

Fast-Hardening Hot Glue Sticks

Glue hardens in 15 seconds or less to bond quickly. Made of FDA listed materials, it is suitable for food packaging.

Dia.	Lg.	Begins to Harden, sec.	Reaches Full Strength, hr.	Application Temp. Range, ° F	Consistency	Viscosity, cP	Elongation	Color	Food Industry Std.	For Joining	Approx. No. of Sticks per lb.		1 lb.	5 lb.	25 lb.
7/16"	4"	15	24	250 to 380	Thick Liquid	5,000	400%	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	45	7518A57	000000	000000	0000000
7/16"	15"	5	24	250 to 300	Thin Liquid	1,160	275%	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	12	7518A59	00000	00000	000000
7/16"	15"	15	24	250 to 380	Thick Liquid	5,000	400%	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	12	7518A58	00000	00000	000000
5/8"	10"	15	24	250 to 380	Thick Liquid	5,000	400%	Beige	FDA Compliant 21 CFR 175.105	Cardboard, Fabric	10	7518A53	—	00000	000000

Quick-Set Epoxy Structural Adhesives


Bottle	Cartridge	Syringe

For quick repairs, these epoxies begin to harden in six minutes or less. Epoxies are the strongest and most chemical-resistant structural adhesives. They bond especially well on metal.

These adhesives come in two parts that need to be mixed. The container size listed is the combined total of the two parts.

Cartridge—To mix and dispense these adhesives, you'll need a mixer nozzle and dispensing gun.

Thick Liquid—Flow into narrower gaps than gels and pastes, but thick enough to stay put on uneven surfaces.

		Container				Strength
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, min.	Reaches Full Strength	Shear, psi	Peel, lbf/in. wd.	Mix Ratio	Consistency	Viscosity, cP	Temp. Range, ° F	For Joining		Each
J-B Weld







				PlasticWeld

				50132	0.85	Syringe	5	60 min.	2,000	Not Rated	1:1	Thick Liquid	9,000	-20 to 300	Composite, Masonry, Metal, Plastic, Rubber, Wood	7605A5	00000


				Devcon







								5 Minute Epoxy

								14200	15	Bottle	5	12 hr.	1,900	2	1:1	Thick Liquid	10,000	-40 to 200	Masonry, Metal, Plastic, Wood	7524A4	00000


								14250	0.84	Syringe	5	12 hr.	1,900	2	1:1	Thick Liquid	10,000	-40 to 200	Masonry, Metal, Plastic, Wood	7541A76	00000
								14270	1.69	Cartridge	5	12 hr.	1,900	2	1:1	Thick Liquid	10,000	-40 to 200	Masonry, Metal, Plastic, Wood	66215A31	00000

Instant-Bond Adhesives

Bottle

Create strong, permanent bonds in 75 seconds or less. Also known as super glue, these adhesives are ideal for fast assembly and repair.

Apply an accelerator first to reach a full-strength bond even faster.

Thin Liquid—Seep into narrow gaps and joints that thick-liquid adhesives can't reach. Use when bonding close-fitting parts.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	For Joining		Each
Loctite®



		401	0.1	Tube	15	24	Thin Liquid	110	0.005"	-65 to 250	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A63	00000


		401	0.7	Bottle	15	24	Thin Liquid	110	0.005"	-65 to 250	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A33	00000
		401	16	Bottle	15	24	Thin Liquid	110	0.005"	-65 to 250	Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A85	000000
		4471	0.7	Bottle	15	24	Thin Liquid	630	0.008"	-65 to 180	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A34	00000
		4471	16	Bottle	15	24	Thin Liquid	630	0.008"	-65 to 180	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A75	000000

Instant-Bond Adhesives for Hard-to-Bond Materials

Join plastics that standard instant-bond adhesives can't grip. These adhesives stick to smooth materials, such as polyethylene and polypropylene. Clean and prepare the surface with primer so the adhesive can spread, dry, and gain strength.

Add an accelerator after the primer and before the adhesive to reach a full-strength bond faster.

Cartridge—Apply with a caulk gun.

Syringe—Apply with a dispensing gun.

Gel—Flow more slowly than liquid and stick in place without dripping, even on vertical surfaces. Use when making a mess isn't an option.

Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.

		Container
	Mfr. Model No.	Size, fl. oz.	Type	Begins to Harden, sec.	Reaches Full Strength, hr.	Consistency	Viscosity, cP	Max. Gap Size Filled	Temp. Range, ° F	For Joining		Each
Loctite®



		454	0.1	Tube	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A65	00000


		454	0.3	Syringe	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A87	00000
		454	0.7	Tube	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A35	00000
		454	1	Syringe	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A28	00000
		454	7	Tube	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A88	000000
		454	10.5	Cartridge	15	24	Gel	29,000	0.01"	-65 to 250	Cardboard, Composite, Fabric, Foam, Metal, Plastic, Rubber, Wood	74765A29	000000


		3M Scotch-Weld



				SI Gel	0.7	Tube	20	24	Gel	125,000	0.02"	-65 to 180	Fabric, Plastic, Rubber, Wood	75445A26	00000