We will reply to your message within an hour.
More
Also known as mild steel, low-carbon steel is easy to machine, form, and weld. It's widely fabricated into parts that don’t require high strength.
With a thickness that's precision ground to a tight tolerance, these bars are sometimes called flat stock.
These sheets and bars are zinc galvanized for good corrosion resistance.
A silver-filled resin coating on one side of these sheets protects from degradation caused by bacteria and fungi.
Coated with an aluminum-silicon alloy, these sheets resist corrosion while withstanding long-term exposure to high temperatures. Use in drying ovens, furnaces, and smokestacks.
The galvannealed coating allows these steel sheets to be painted without prepping the surface. They're easier to weld and more scratch resistant than zinc-galvanized steel sheets. Use them for outdoor signs, cabinets, and doors.
In addition to good corrosion resistance, the nickel coating provides better wear resistance than the zinc-galvanized coating.
This UHSS (ultra high-strength steel) allows you to fabricate high-strength parts using thinner material than you could with other types of steel. It is formable, weldable, and more economical than alloy steel.
Easy to forge, grind, and heat treat, these 1084 high-carbon steel bars offer high strength and resist wear and abrasion.
The nickel and molybdenum content gives AR400 carbon steel the ability to resist wear better than all other carbon steel. It's often used as wear strips, liners, and deflector plates.
The lead additive acts as a lubricant, which allows 12L14 carbon steel to withstand very fast machining. It's used to fabricate a wide variety of machine parts.
A lead-free alternative to 12L14, 1215 carbon steel contains the same amount of sulfur and phosphorus for excellent machinability. It is often used for shaft couplings, studs, and pins.
Stronger than low-carbon steel with equally good machinability, 1045 carbon steel is widely used for bolts, studs, and shafts.
Exceptional hardness makes AR500 carbon steel more resistant to wear and impact than other carbon steel.
Even in low temperatures, A516 carbon steel resists breaking upon impact. Also known as pressure-vessel-quality (PVQ) steel, it is mostly used for boilers, storage tanks, and pressure vessels.
Cut this stock into custom shapes to fit your application.
Keep shim stock in a variety of thicknesses on hand with these sets. Cut into custom shapes to fit your application.
Cut this shim stock into custom shapes to fit your application. Stock is made of layers of material bonded with adhesive; remove layers with a utility knife until you get the thickness you need.
Create a custom shim to fit your application.
Use these sheets for machine guards and protective panels in noncorrosive environments.
Hexagonal holes provide a large open area for high-flow applications.
Close off openings in structures while allowing air to pass through.