McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    250 Products

    Taps

    Image of Product. Front orientation. Taps. Taps.
    Cut threads into holes so screws, bolts, and rods fit snugly. Our basic taps have straight flutes that are good for most jobs.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    Taper Chamfer—Good for both starting holes and threading through holes. These taps have the longest taper to gradually engage with the material, reducing the force needed to turn them. They can't reach the bottom of blind holes, however, so you will likely need to finish with a bottoming-chamfer tap.
    Plug Chamfer—Our go-to chamfer type, these thread both through holes and blind holes. The tapered section is shorter than a taper chamfer and longer than bottoming chamfer. As a result, they're easier to turn than bottoming taps but require more force than taper taps.
    Bottoming Chamfer—Cut all the way to the bottom of blind holes with taps that have the shortest taper. Since these require the most force to turn, they’re often used to finish holes started by taper- or plug-chamfer taps.
    Number of Flutes—Taps with fewer flutes have more space to capture chips, so you won’t have to clear them as often. However, they can be more difficult to keep straight in the hole.
    Drill Bit
    Taper Chamfer
    Plug Chamfer
    Bottoming
    Chamfer
    Thread Size
    Thread
    Lg.
    Overall
    Lg.
    Thread
    Type
    No. of
    Flutes
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Each
    Each
    Carbon Steel
     
    Uncoated
    0-80
    5/16"1 5/8"UNF
    33/64"
    0.0469"Square25995A1130000025995A2110000025995A11400000
    1-72
    3/8"1 11/16"UNF
    253 Ga.
    0.0595"Square25995A115000025995A212000025995A1160000
    2-56
    7/16"1 3/4"UNC
    351 Ga.
    0.067"Square25995A123000025995A143000025995A1630000
    4-40
    9/16"1 7/8"UNC
    343 Ga.
    0.089"Square25995A125000025995A145000025995A1650000
    5-40
    5/8"1 15/16"UNS
    338 Ga.
    0.1015"Square26035A277000026035A313000026035A3330000
    6-32
    11/16"2"UNC
    336 Ga.
    0.1065"Square25995A127000025995A147000025995A1670000
    8-32
    3/4"2 1/8"UNC
    429 Ga.
    0.136"Square25995A128000025995A148000025995A1680000
    10-24
    7/8"2 3/8"UNC
    425 Ga.
    0.1495"Square25995A129000025995A149000025995A1690000
    10-32
    7/8"2 3/8"UNF
    421 Ga.
    0.159"Square25995A189000025995A219000025995A2390000
    12-24
    15/16"2 3/8"UNC
    416 Ga.
    0.177"Square25995A131000025995A151000025995A1710000
    3/16"-24
    7/8"2 3/8"UNS
    45/32"
    0.1563"Square26035A281000026035A316000026035A3360000
    1/4"-20
    1"2 1/2"UNC
    47 Ga.
    0.201"Square26035A121000026035A155000026035A1780000
    1/4"-28
    1"2 1/2"UNF
    43 Ga.
    0.213"Square26035A211000026035A231000026035A2510000
    5/16"-18
    1 1/8"2 23/32"UNC
    4F
    0.257"Square26035A122000026035A156000026035A1790000
    5/16"-24
    1 1/8"2 23/32"UNF
    4I
    0.272"Square26035A212000026035A232000026035A2520000
    3/8"-16
    1 1/4"2 15/16"UNC
    45/16"
    0.3125"Square26035A123000026035A157000026035A1810000
    3/8"-24
    1 1/4"2 15/16"UNF
    4Q
    0.332"Square26035A213000026035A233000026035A2530000
    7/16"-14
    1 7/16"3 5/32"UNC
    4U
    0.368"Square26035A124000026035A158000026035A1820000
    7/16"-20
    1 7/16"3 5/32"UNF
    425/64"
    0.3906"Square26035A214000026035A234000026035A2540000
    1/2"-13
    1 21/32"3 3/8"UNC
    427/64"
    0.4219"Square26035A125000026035A159000026035A1830000
    1/2"-20
    1 21/32"3 3/8"UNF
    429/64"
    0.4531"Square26035A215000026035A235000026035A2550000
    9/16"-12
    1 21/32"3 19/32"UNC
    431/64"
    0.4844"Square26035A126000026035A161000026035A1840000
    9/16"-18
    1 21/32"3 19/32"UNF
    433/64"
    0.5156"Square26035A216000026035A236000026035A2560000
    5/8"-11
    1 13/16"3 13/16"UNC
    417/32"
    0.5313"Square26035A1270000026035A1620000026035A18500000
    5/8"-18
    1 13/16"3 13/16"UNF
    437/64"
    0.5781"Square26035A2170000026035A2370000026035A25700000
    3/4"-10
    2"4 1/4"UNC
    421/32"
    0.6563"Square26035A1290000026035A1640000026035A18700000
    3/4"-16
    2"4 1/4"UNF
    411/16"
    0.6875"Square26035A2190000026035A2390000026035A25900000
    7/8"-9
    2 7/32"4 11/16"UNC
    449/64"
    0.7656"Square26035A1310000026035A1650000026035A18800000
    7/8"-14
    2 7/32"4 11/16"UNF
    413/16"
    0.8125"Square26035A2210000026035A2410000026035A26100000
    1"-8
    2 1/2"5 1/8"UNC
    47/8"
    0.875"Square26035A1320000026035A1660000026035A18900000
    1"-12
    2 1/2"5 1/8"UNF
    459/64"
    0.9219"Square26035A2220000026035A2420000026035A26200000
    1"-14
    2 1/2"5 1/8"UNS
    423.5 mm
    0.9252"Square26035A8410000026035A8420000026035A84300000
    1 1/8"-7
    2 9/16"5 7/16"UNC
    463/64"
    0.9844"Square26035A1330000026035A1670000026035A19100000
    1 1/8"-12
    2 9/16"5 7/16"UNF
    41 1/32"
    1.0313"Square26035A2230000026035A2430000026035A26300000
    1 1/4"-7
    2 9/16"5 3/4"UNC
    41 3/32"
    1.0938"Square26035A1340000026035A1680000026035A19200000
    1 1/4"-12
    2 9/16"5 3/4"UNF
    61 11/64"
    1.1719"Square26035A2240000026035A2440000026035A26400000
    1 3/8"-6
    3"6 1/16"UNC
    41 7/32"
    1.2188"Square26035A13500000026035A16900000026035A193000000
    1 3/8"-12
    3"6 1/16"UNF
    61 19/64"
    1.2969"Square26035A22500000026035A24500000026035A265000000
    1 1/2"-6
    3"6 3/8"UNC
    41 11/32"
    1.3438"Square26035A13600000026035A17100000026035A194000000
    1 3/4"-5
    3 3/16"7"UNC
    61 9/16"
    1.5625"Square26035A13700000026035A17200000026035A195000000
    2"-4 1/2
    3 9/16"7 5/8"UNC
    61 25/32"
    1.7813"Square26035A13800000026035A17300000026035A196000000
    M3 × 0.5 mm5/8"1 15/16"Metric
    32.5 mm0.0984"Square25995A511000025995A526000025995A5420000
    M4 × 0.7 mm3/4"2 1/8"Metric
    43.3 mm
    0.1299"Square25995A512000025995A527000025995A5430000
    M5 × 0.8 mm7/8"2 3/8"Metric
    44.2 mm
    0.1654"Square25995A513000025995A528000025995A5440000
    M6 × 1 mm1"2 1/2"Metric
    45 mm0.1968"Square25995A514000025995A529000025995A5450000
    M7 × 1 mm1"2 23/32"Metric
    46 mm0.2362"Square———025995A5310000———0
    M8 × 1.25 mm1 1/4"2 23/32"Metric
    46.75 mm
    0.2657"Square25995A516000025995A532000025995A5470000
    M10 × 1.5 mm1 1/2"2 15/16"Metric
    48.5 mm
    0.3346"Square25995A5170000025995A5330000025995A54800000
    M12 × 1.75 mm1 21/32"3 3/8"Metric
    410.3 mm
    0.4016"Square25995A5180000025995A5340000025995A54900000
    M14 × 2 mm1 21/32"3 19/32"Metric
    412 mm0.4724"Square———025995A5350000025995A55100000
    M16 × 2 mm1 13/16"3 13/16"Metric
    414 mm0.5512"Square25995A5210000025995A5360000025995A55200000
    M20 × 2.5 mm2"4 15/32"Metric
    417.5 mm
    0.689"Square25995A5230000025995A5380000025995A55400000
    M22 × 2.5 mm2 7/32"4 11/16"Metric
    419.5 mm
    0.7677"Square25995A5240000025995A53900000———0
    M24 × 3 mm2 7/32"4 29/32"Metric
    421 mm0.8268"Square———025995A5410000025995A55600000
     

    Tap Sets

    These sets include a variety of taps for threading holes so screws, bolts, and rods fit snugly.
    Carbon Steel—Single Thread Size Sets
    Image of Product. Taper, Plug, and Bottoming Chamfer Set. Front orientation. Taps. Tap Sets, Single Tap Thread Size.

    Taper, Plug, and Bottoming

    Chamfer Set

    The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Sets include one each chamfer type: Taper for starting holes and through holes; plug for through holes and blind holes; and bottoming for cutting the closest to the bottom of any hole.
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Tap Sizes
    Included
    Thread
    Type
    Container
    Type
    No. of
    Flutes
    Shank
    Type
    Each
    Uncoated
    30-80UNF
    Plastic Case3Square25995A117000000
    31-72UNF
    Plastic Case2Square25995A11800000
    32-56UNC
    Plastic Case3Square25995A33300000
    34-40UNC
    Plastic Case3Square25995A3350000
    35-40UNS
    Plastic Case3Square26035A4130000
    36-32UNC
    Plastic Case3Square25995A3370000
    36-40UNF
    Plastic Case3Square25995A6110000
    36-48UNS
    Plastic Case3Square25995A6120000
    38-32UNC
    Plastic Case4Square25995A3380000
    310-24UNC
    Plastic Case4Square25995A3390000
    310-32UNF
    Plastic Case4Square25995A3590000
    312-24UNC
    Plastic Case4Square25995A6130000
    312-28UNF
    Plastic Case4Square25995A6140000
    33/16"-24UNS
    Plastic Case4Square26035A4160000
    31/4"-20UNC
    Plastic Case4Square26035A35100000
    31/4"-28UNF
    Plastic Case4Square26035A37100000
    35/16"-18UNC
    Plastic Case4Square26035A35200000
    35/16"-24UNF
    Plastic Case4Square26035A37200000
    33/8"-16UNC
    Plastic Case4Square26035A35300000
    33/8"-24UNF
    Plastic Case4Square26035A37300000
    37/16"-14UNC
    Plastic Case4Square26035A35400000
    37/16"-20UNF
    Plastic Case4Square26035A37400000
    31/2"-13UNC
    Plastic Case4Square26035A35500000
    31/2"-20UNF
    Plastic Case4Square26035A37500000
    39/16"-12UNC
    Plastic Case4Square26035A35600000
    39/16"-18UNF
    Plastic Case4Square26035A37600000
    35/8"-11UNC
    Plastic Case4Square26035A35700000
    35/8"-18UNF
    Plastic Case4Square26035A37700000
    33/4"-10UNC
    Plastic Case4Square26035A35900000
    33/4"-16UNF
    Plastic Case4Square26035A37900000
    37/8"-14UNF
    Plastic Case4Square26035A38100000
    37/8"-9UNC
    Plastic Case4Square26035A36100000
    31"-8UNC
    Plastic Case4Square26035A36200000
    31"-12UNF
    Plastic Case4Square26035A38200000
    31"-14UNS
    Plastic Case4Square26035A84400000
    31 1/8"-7UNC
    Plastic Case4Square26035A363000000
    31 1/8"-12UNF
    Plastic Case4Square26035A383000000
    31 1/4"-7UNC
    Plastic Case4Square26035A364000000
    31 1/4"-12UNF
    Plastic Case6Square26035A384000000
    31 1/2"-6UNC
    Plastic Case4Square26035A366000000
    31 3/8"-6UNC
    Plastic Case4Square26035A365000000
    31 3/8"-12UNF
    Plastic Case6Square26035A385000000
    31 3/4"-5UNC
    Plastic Case6Square26035A367000000
    32"-4 1/2UNC
    Plastic Case6Square26035A368000000
    3M3Metric
    Plastic Case3Square26015A53100000
    3M4Metric
    Plastic Case3Square26015A53200000
    3M5Metric
    Plastic Case4Square26015A53300000
    3M6Metric
    Plastic Case4Square26015A53400000
    3M7Metric
    Plastic Case4Square26015A53500000
    3M8Metric
    Plastic Case4Square26015A53600000
    3M10Metric
    Plastic Case4Square26015A53700000
    3M12Metric
    Plastic Case4Square26015A53800000
    3M14Metric
    Plastic Case4Square26015A53900000
    3M16Metric
    Plastic Case4Square26015A54100000
    3M18Metric
    Plastic Case4Square26015A542000000
    3M20Metric
    Plastic Case4Square26015A543000000
    3M22Metric
    Plastic Case4Square26015A544000000
    3M24Metric
    Plastic Case4Square26015A545000000
     
    Carbon Steel—Multiple Thread Size Sets
    Image of Product. Plug Chamfer Set. Front orientation. Taps. Tap Sets, Multiple Tap Thread Sizes.

    Plug Chamfer Set

    The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps. Sets include multiple sizes of plug chamfer taps for through holes and blind holes.
    Plug Chamfer
    Taper Chamfer, Plug
    Chamfer, Bottoming Chamfer
    No. of
    Pieces
    Tap Sizes Included
    Thread
    Type
    Container
    Type
    Shank
    Type
    Each
    Each
    Uncoated
    603 each of sizes 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, and 1"-12UNF, UNC
    Plastic CaseSquare———02688A110000000
    1135 each of sizes M3 × 0.50 mm, M3 × 0.60 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm; M12 × 1.25 mm, M12 × 1.50 mm, and M12 × 1.75 mm, 1 each of sizes M14 × 1.25 mm, M14 × 1.50 mm; M5 × 0.90 mm, M6 × 1.00 mm, M6.3 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm; M9 × 0.75 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm; M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 2.50 mm, M20 × 2.50 mm, and M24 × 3.00 mmMetric
    Plastic CaseSquare2688A130000000———0
     

    Tap and Die Sets

    Image of Product. Front orientation. Tap and Die Sets.
    Use a single set for many sizes of internal and external threads. The taps and dies are for use on most metal and plastic.
    Carbon Steel—Carbon steel taps are for thread repair and occasional tapping.
    High-Speed Steel—High-speed steel taps and dies last longer than carbon steel when used on similar material.
    Plug Chamfer—Plug-chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper-chamfer taps. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    Taper Chamfer—Taper-chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Hex—Hex-shaped dies are for thread repair and can be used with conventional wrenches.
    No. of
    Pieces
    Tap Sizes Included
    Tap Chamfer
    Type
    Die
    Shape
    Die Sizes Included
    Wd.
    Container
    Type
    Includes
    Each
    Carbon Steel Taps and Dies
     
    Right-Hand Thread
    121/8, 1/4, 3/8, 1/2, 3/4, 1TaperHex1/8"-27, 1/4"-18, 3/8"-18, 1/2"-14, 3/4"-14, 1"-11 1/21 1/16", 1 1/4", 1 7/16", 1 5/8", 2", 2 3/8"Plastic Case2549A760000000
    241/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20Plug, TaperHex1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-201"Plastic CaseDie Wrench, Tap Wrench2631A5000000
    241/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlug, TaperHex1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.25 mm, M10 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm1"Plastic CaseDie Wrench, Tap Wrench26025A4100000
    25M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mmPlugHexM14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm1 7/16", 1 13/16"Plastic CaseDie Wrench (2), Tap Wrench26025A42000000
    404-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20Plug, TaperHex4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-205/8", 1"Plastic CaseDie Wrench (2), Tap Wrench (3), Thread Gauge2625A12000000
    406-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mmPlug, TaperHex6-32, 8-32, 10-24, 1/8"-27, 1/4"-20, 5/16"-18, 3/8"-16, 7/16"-14, 1/2"-13, M4 × 0.75 mm, M5 × 0.80 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.75 mm5/8", 1"Plastic CaseDie Wrench (2), Tap Wrench (3), Thread Gauge2668A36000000
    401/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mmPlug, TaperHex1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm5/8", 1"Plastic CaseDie Wrench (2), Tap Wrench (3), Thread Gauge2647A12000000
    521/4"-19, 1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mmPlug, TaperHex1/8"-28, 1/4"-19, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm1", 1 7/16"Plastic CaseDie Wrench (2), Tap Wrench (3), Thread Gauge2726A66000000
    536-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 1/4"-18Plug, TaperHex6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-161", 1 7/16"Plastic CaseDie Wrench (2), Screwdriver, Tap Wrench (3), Thread Gauge25955A6000000
    654-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-9, 7/8"-14, 1"-8, 1"-14, 1/4"-18Plug, TaperHex4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/4"-18, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 7/8"-14, 7/8"-9, 1"-8, 1"-145/8", 1", 1 7/16", 1 13/16"Plastic CaseDie Wrench (4), Tap Wrench (4), Thread Gauge26075A71000000
    651/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mmPlug, TaperHex1/8"-28, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M14 × 2.00 mm, M16 × 1.50 mm, M16 × 2.00 mm, M18 × 1.50 mm, M18 × 2.50 mm, M20 × 2.50 mm, M22 × 1.50 mm, M24 × 2.00 mm, M24 × 3.00 mm5/8", 1", 1 3/16", 1 7/16", 1 13/16"Plastic CaseDie Wrench (4), Tap Wrench (4), Thread Gauge2726A68000000
     
    High-Speed Steel Taps and Carbon Steel Dies
     
    Right-Hand Thread
    121/8, 1/4, 3/8, 1/2, 3/4, 1TaperHex1/8"-27, 1/4"-18, 3/8"-18, 1/2"-13, 3/4"-14, 1"-11 1/225/32", 1 1/16", 1 1/4", 1 5/8", 1 13/16", 2 3/16"Plastic Case2549A78000000
     

    Tap, Die, and Thread File Sets

    Image of Product. Front orientation. Tap, Die, and Thread File Sets.
    Repair screw threads in a wide range of sizes. The dies are hex shaped for use with conventional wrenches. The taps have a square shank that's compatible with tap wrenches and tap holders for drill presses and drilling machines. With a plug chamfer, all taps have 3-5 chamfered threads and are suitable for thread repair in both through holes and closed-end holes.
    No. of
    Pieces
    Tap Sizes Included
    Die Sizes Included
    File Sizes Included
    Container
    Type
    Each
    Carbon Steel
     
    Right-Hand Thread
    531/4”-20, 1/4”-28, 5/16”-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-18, 9/16”-12, M6 × 1.00 mm, M8 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18, 3/4"-10, 3/4"-16, 3/4"-20, M6 × 1.00 mm, M6 × 1.25 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M8 × 1.50 mm, M10 × 1.00 mm, M10 × 1.25 mm, M10 × 1.50 mm, M12 × 1.25 mm, M12 × 1.50 mm, M12 × 1.75 mm, M14 × 1.25 mm, M14 × 1.50 mm, M20 × 1.50 mmFor 11 to 24 threads per inch, For 0.8 to 3 mm thread pitchesPlastic Case25325A140000000
     

    Tap, Die, and Drill Bit Sets

    Image of Product. Front orientation. Tap, Die, and Drill Bit Sets.
    Cut and repair threads and drill holes in many different sizes. Tap and die wrenches are included. The dies are hex shaped for use with conventional wrenches. The taps are made of carbon steel and are recommended for thread repair and occasional tapping.
    Taper Chamfer—Taper chamfer taps have 7-10 chamfered threads at the tip for cutting into the workpiece. They require less torque than other chamfer types, making them a good choice for starting threads and tapping through holes. However, a longer taper means that they cannot thread as close to the bottom of closed-end holes.
    Plug Chamfer—Plug chamfer taps are a versatile choice for most tapping applications. With 3-5 chamfered cutting threads, they require moderate torque and are often used for start-to-finish tapping of through holes and closed-end holes. However, they do not start threads as easily as taper chamfers. When using them to tap closed-end holes, be sure to leave sufficient space at the bottom for chips to accumulate.
    No. of
    Pieces
    Tap Sizes Included
    Die Sizes Included
    Drill Bit Sizes Included
    Container
    Type
    Includes
    Tap Chamfer
    Type
    Each
    Carbon Steel
     
    Right-Hand Thread
    1174-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/8"-27, 1/8"-28, 1/4"-20, 1/4"-28, 5/16"-18, 5/16"-24, 3/8"-16, 3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, M3 × 0.50 mm, M4 × 0.70 mm, M4 × 0.75 mm, M5 × 0.80 mm, M5 × 0.90 mm, M6 × 1.00 mm, M7 × 1.00 mm, M8 × 1.00 mm, M8 × 1.25 mm, M9 × 1.00 mm, M9 × 1.25 mm, M10 × 1.25 mm, M10 × 1.50 mm, M11 × 1.50 mm, M12 × 1.50 mm, M12 × 1.75 mm5/64", 7/64", 5/32", 1/4", 19/64", 5/16", 21/64", 3/8", 25/64", 13/32", 27/64", 29/64", 43 ga., 39 ga., 36 ga., 30 ga., 29 ga., 25 ga., 21 ga., 20 ga., 16 ga., 9 ga., 7 ga., 3 ga., B, F, H, I, J, O, Q, R, S, U, ZPlastic CaseDie Wrench (2), Extractor (5), Tap Wrench (3), Thread Gauge (2)Taper, Plug82955A110000000
     

    Pipe and Conduit Taps

    Add internal threads to pipe and conduit or components such as manifolds. They have straight flutes that are good for most jobs.
    NPT ThreadAbout NPT Thread
    Image of Product. Front orientation. Taps. Pipe and Conduit Taps.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    Drill Bit
    Plug Chamfer
    Pipe
    Size
    Thread
    Lg.
    Overall
    Lg.
    No. of
    Flutes
    Threads
    per In.
    Size
    Decimal Size
    Equiv.
    Shank
    Type
    Each
    Carbon Steel
     
    Uncoated
    1/16
    11/16"2 1/8"427C
    0.242"Square25995A505000000
    1/8
    3/4"2 1/8"427R
    0.339"Square2525A11200000
    1/4
    1 1/16"2 7/16"4187/16"
    0.4375"Square2525A11300000
    3/8
    1 1/16"2 9/16"41837/64"
    0.5781"Square2525A11400000
    1/2
    1 3/8"3 1/8"41423/32"
    0.7188"Square2525A11500000
    3/4
    1 3/8"3 1/4"51459/64"
    0.9219"Square2525A11600000
    1
    1 3/4"3 3/4"511 1/21 5/32"
    1.1563"Square2525A11700000
    1 1/4
    1 3/4"4"511 1/21 1/2"
    1.5"Square2525A11800000
    1 1/2
    1 3/4"4 1/4"711 1/21 23/32"
    1.7188"Square2525A119000000
    2
    1 3/4"4 1/2"711 1/22 3/16"
    2.1875"Square2525A121000000
    2 1/2
    2 3/4"5 1/2"882 5/8"
    2.625"Square25995A501000000
    3
    2 3/4"6"883 1/4"
    3.25"Square25995A502000000
    3 1/2
    2 3/4"6 1/2"883 3/4"
    3.75"Square25995A503000000
    4
    3"7"884 1/4"
    4.25"Square25995A504000000
     

    Pipe and Conduit Tap Sets

    Image of Product. Front orientation. Taps. Pipe and Conduit Tap Sets.
    A range of sizes for adding internal threads to pipe and conduit. These taps can also be used to thread components like manifolds. They have straight flutes that are good for most jobs.
    Carbon Steel—The economical choice for occasional hand tapping. These work on most metals and plastic but will dull more quickly than other taps.
    No. of
    Pieces
    Pipe Size
    Thread Type
    Chamfer
    Type
    No. of
    Flutes
    Container
    Type
    Shank
    Type
    Each
    Carbon Steel
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    NPT
    Plug4, 5Fabric PouchSquare2765A420000000
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    BSPP, Metric
    Bottoming4, 5Fabric PouchSquare2765A511000000
    61/8, 1/4, 3/8, 1/2, 3/4, 1
    BSPT, Metric
    Plug4, 5Fabric PouchSquare2765A512000000
     

    6-in-1 Thread Repair Tools

    Image of Product. Front orientation. ZoomedIn view. Contains Inset. Thread Repair Tools. 6-in-1 Thread Repair Tools.
    Restore six internal thread sizes with one tool. To use, combine the included handle, tap holder, and one of the two taps; each tap works with three thread sizes. Replacement tap sets (sold separately) include a holder and two taps.
    Thread
    Size (Type)
    Lg.
    Overall
    Lg.
    Handle
    Material
    Each
    Uncoated Carbon Steel
    1/4"-20, 6-32, 8-32, 10-24, 12-24 (UNC), 10-32 (UNF)1/4"8 1/2"Plastic2555A7000000
     
    Replacement Tap Sets
    Each
    Replacement Tap Set2555A73000000
    back to top