A rubber gasket provides a watertight seal.

Each compartment is a removable bin cup, so you can reconfigure the box without emptying the contents.

These boxes are made with an additive that protects sensitive contents from electrostatic discharge.

These pouches are sized to fit cell phones, electric testers/meters, or other small instruments.

Slip these pouches onto your belt to keep several tools within reach.

Carry and protect levels in these padded bags.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. These enclosures have a clear cover, so you can inspect components without opening the enclosure.

View all sides of your installed components.

Control access to these enclosures with a key-operated lock.

Aluminum enclosures are a lightweight yet durable alternative to stainless steel.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components. Enclosures are made of nonconductive polycarbonate that resists denting, chipping, and cracking.

Stainless steel enclosures are more corrosion resistant than aluminum for use in environments with corrosive liquids.

With a hygienic design, these enclosures minimize spots where food, debris, and water could collect after washdowns. Use them to house and mount switches, buttons, and other components in sanitary environments.

Mounting feet make attachment to machines and walls hassle-free.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures mount directly into walls to protect wiring and reduce the surface area that needs to be cleaned. Standard-size push-button holes are already installed, saving you the effort of measuring and cutting holes yourself.

Protect electronics from washdowns in food plants and other sanitary environments. These enclosures have standard-size push-button holes, saving you the effort of measuring and cutting holes yourself. A shroud hangs over the holes to guard buttons from damage and accidental pushing.

Made of polycarbonate, these enclosures resist denting, chipping, and cracking better than stainless steel enclosures.

Made of nonconductive polycarbonate, these enclosures withstand prolonged submersion in water while protecting electronics from dents, chips, and cracks.

Internal mounting bosses or mounting brackets enable you to use panels or DIN rail to mount components.

Install these enclosures on control panels and walls and inspect what’s inside without exposing their contents in wet and outdoor locations.

Check on the contents inside these enclosures from every angle without opening them in wet environments.

Inspect components without opening the cover.

Holes in the cover allow easy installation of push buttons, switches, and indicating lights.

With internal slots and external fins, these enclosures hold circuit boards securely and dissipate heat to keep electronics from overheating.

Small and lightweight, these enclosures are used with sensors, switches, and testing devices.

These enclosures allow you to inspect your electronics without opening the cover.

House electrical components in these general purpose enclosures.

With an overhanging top and a NEMA 3RX rating, these enclosures guard electronics from snow, rain, and sleet as well as dirt and light splashing.

These enclosures are rated NEMA 4 for protection from dirt and washdowns.

Control access to these enclosures with a key-operated lock.

Keep components safe from rain, snow, and ice. These enclosures are rated NEMA 3R for protection from dirt, falling liquids, and light splashing.

No need to cut your own holes—these enclosures already have them to make installing push-buttons, switches, and indicating lights quick and easy.

Make your push buttons, switches, and indicating lights more visible and ergonomic to use. Enclosures mount on either of two sides, creating a 30° or 60° slanted surface.

Holes in the cover of these enclosures allow easy installation of push buttons, switches, and indicating lights.

UL and C-UL classified, these enclosures safely house push-button controls and electronics where there’s explosive dust and gas.

Protect keypads, push-buttons, and other handheld controls with these round enclosures that are more comfortable to hold than square enclosures.

Suitable for installing in the ground or for use in wet environments, these direct burial enclosures are rated NEMA 6P for protection from dirt, washdowns, corrosion, and water submersion.

House emergency stop buttons, life safety equipment, and other devices that need to be seen with these brightly colored enclosures, which are easy to spot even in high-dust areas.

Protect tablet computers, touch displays, and readouts in these specially sized enclosures. They are rated IP65 for protection from spraying water.

Create battery-powered, hand-held devices such as card and signal readers—these enclosures have a clear cover for checking screens and status lights inside.

These enclosures shield electrical components from water, so they’re safe to install onto DIN rail in wet and washdown environments.

These freestanding enclosures have a gasketed door with clamps to ensure a watertight seal. They are rated NEMA 4 and 13 for protection from dirt, washdowns, and oil/coolant spraying.

Easily access HMI devices, push-buttons, and other electronics mounted on the exterior of an enclosure while keeping contents safe from water, oil, dust, and weather.

These cabinets accommodate up to 3,200 lbs. of equipment and have larger interiors than standard electronics cabinets.

Mount servers, automation controls, and computers in these open racks, they make it easy to organize and swap out components. Less bulky than electronics cabinets, you can line up these racks to maximize limited storage space. All are compatible with standard 19" wide components.

Protect wire and cable from dust, dirt, and oil/coolant dripping—this raceway is rated NEMA 12.

Drawers and labeled compartments provide space for keeping tools organized. Taps and drill bits are not included.

These pouches fit onto most hand-held power drills and impact drivers. They have a magnetic panel on the front that can hold bits and fasteners.

These cabinets have one undivided drawer.

Store multiple bits of each size. These cabinets have drawers marked with the sizes and decimal equivalents.

Each hole is sized to hold the 1/2" shank of a reduced-shank drill bit and marked with a bit size.

Store and organize drill bits so they stay in good working condition and don't go missing.

Keep your tweezers organized in these partitioned cases.

Organize and store your end mills.

Store a variety of sizes and styles of bits and adapters in one compact tray.

Mount the magnetic base to walls, cabinets, and other steel surfaces.

The slots in these low-profile organizers are a different color than the base so it's clear when tools are missing.

Position these low-profile rails to accommodate screwdrivers of any length.

The slots in these low-profile organizers are a different color than the base, so it's clear when tools are missing from your bench top or drawer. Made of polyethylene foam that resists solvents and petroleum products, organizers are designed to store L-key sets of specific sizes.

These chests have floor-mounting baseplates so they can be locked in place or detached for portability.

Designed for marine environments, these chests have stainless steel hardware, so no parts will rust or corrode, even in saltwater.

Create your own storage system by choosing a frame and adding boxes, which come in a variety of compartment configurations.

Remove individual boxes to take the parts you need without moving the entire storage unit.

Elevate your cabinets off the ground.