Also called acetate, this is the same clear film that's used in window envelopes. Choose cellulose when you need a low-cost plastic with good clarity.

Widely used as shipping tubes, these thin-walled tubes provide good clarity at an economical price. They are made of cellulose, which is also known as butyrate.

Spray this paint on the back of glass or clear plastic to create a reflective silver effect on the other side. One coat will create a translucent appearance; use up to five coats for a mirror-like finish. Allow paint to dry for one minute between coats. Apply a layer of clear or flat black paint after all layers dry completely to protect finish from chipping and scratching.

Our most cost-effective clean room wipes combine the strength of polyester with the absorbency of cellulose. They are autoclavable.

Use these cartridges in a diesel fuel generator to filter contaminants. They are made of cellulose and steel that are bonded into one solid piece for high strength and durability.

If you don’t see the replacement filter cartridge you need please ask for 4943T999 and specify the Baldwin model number.

Unlike flat wipes, these double-folded clean room wipes have several sides for wiping. Since they’re folded, they can be pulled one at a time from clean room wipe dispensers to reduce cross contamination and waste. These wipes are cleaned and double bagged in a clean room for sterility and are low linting, so they won’t shed fibers that could contaminate your clean room. They’re made of a polyester/cellulose blend that combines polyester’s strength with cellulose’s absorbency. Wipes are autoclavable.

Use these tapes for light duty mending and holding.

Protect against excess vacuum and pressure in cylinders, gear boxes, enclosures, manifolds, and tanks. You can also use these breather vents to block debris from entering equipment.

When you need to replace your dust collector's bag or cartridge, match up the specs to one that we have.

Disinfect surfaces in clean rooms without exposing them to contaminants. These wipes contain isopropyl alcohol for cleaning and are sterilized by gamma radiation. They’re good for pharmaceutical and other sterile applications. Each package of wipes is marked with a lot number. Made of a polyester/cellulose blend, all of these wipes are strong and absorbent.

These polyester/cellulose wipes are gamma irradiated. Each package is marked with a lot number.

Soft and absorbent, these headbands help keep perspiration out of your eyes.

Collect and measure buildup from the bottom of oil tanks, septic tanks, wastewater lagoons, and other areas. Unlike other samplers that only hold liquids, these samplers can draw in solids, too. They help you monitor sludge, which is important for meeting environmental regulations for sewage. Not for use with ethanol or ethanol-blended fuel.

Made of strong plastic, these samplers are rigid enough to push through tough layers of sludge to collect a complete sample. A valve lets in liquids and solids, then blocks them from going out. Samplers are clear and marked with 1-ft. graduations, so you can view and measure what’s inside. Press down on the valve pin to empty.

These samplers consist of three hollow 5-ft. tubes. Screw together as many as you need to match the depth of your tank. Since they’re detachable, they’re easy to transport.

Extensions—Add extensions to make samplers longer.

These wipes are moistened with isopropyl alcohol and deionized water. Made of a polyester/cellulose blend, they’re both strong and absorbent.