Use for three-sided connections. Flat sides ensure webbing and strapping lay flat, so they won't slide and bunch.

Best for attaching different widths of webbing and strapping, the flat sides ensure they lay flat and won't bunch or slide.

The twisted shape of these links prevents loads from rotating or knotting.

Also known as lap links or repair links.

Strike the prongs with a ball peen hammer and they expand to hold the connecting link together.

Also known as C-links, the notch in these links lets you slip additional links on or remove links quickly.

The flat side allows you to connect webbing and strapping, so they lay flat and resist bunching.

Smaller than lifting oblong links, these links provide room for snaps, carabiners, and other non-lifting connectors.

Once secured with the included locking pin, these links must be cut off to be removed.

The wide end of these links has more room for attachments than standard figure-eight links.

Use these links for general lifting applications.

Providing better load distribution and alignment than single oblong links, these reduce wear in three and four leg slings.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

One end has a bolt fastened with a nut and cotter pin for a more secure connection than flush-pin connectors.

Screw the pin into position by hand for quick installation and removal. They're for use in low-vibration applications where the shackle remains stationary.

Meeting strict standards for lifting, yet flexible and lightweight, these shackles wrap around a variety of lifting points.

Indentations in the shackle body hold the head of the pin in place once fastened.

Cotter pins secure each end of these shackles for temporary installations.

Minimize twisting and knotting of rope and chain.

Since their pin doesn’t stick out from their body, these shackles won’t snag or accidentally come undone. They have a twisted shape to prevent rope and chain from twisting and knotting.

To prevent these shackles from snagging or accidentally coming undone, their pin doesn’t stick out from their body.

For use in low-vibration applications where the shackle remains stationary.

Since they close with a screw pin, these shackles are quick to install and remove by hand, but should only be used in low-vibration environments where they’ll remain stationary. Their narrow opening restricts the movement of wire rope and chain.

The pin doesn’t stick out from their body, so these shackles won’t snag or accidentally come undone. They have a narrow opening that restricts the movement of wire rope and chain.

More secure than screw-pin shackles, these shackles close with a bolt that’s fastened with a nut and a cotter pin.

Disconnect by pulling the lever or attach rope to the eye on the lever for remote release.

Attach a rope to the ring on the pin for remote release where access is limited. These shackes have a clevis end for making pivoting connections.

With a narrow opening and contoured sides, these securely hold a single link of chain to prevent overtightening when lifting a load.

A spring-loaded pin ensures chain won't separate from the hook when the load slackens. Connect your chain to the eye end.

A latch ensures rope, chain, and fittings won't separate from the hook when the load slackens.

These rotate for easy positioning before a load is applied. They have a latch to ensure rope, chain, and fittings won't separate from the hook when the load slackens.

Rotating for easy positioning before a load is applied, these have a latch to ensure that rope, chain, and fittings won't separate from the hook when the load slackens.

The opening on these hooks fits large anchor points and allows chain to slide through when the hook is closed. They have a spring latch to ensure rope, chain, and fittings won't detach from the hook when the load slackens.

Rotate these hooks for easy positioning before lifting your load. They have a latch that locks when a load is applied for a more secure connection than standard hooks.

For a more secure connection than standard hooks, these clevis hooks have a latch that locks closed when a load is applied.

These rotate for easy positioning before a load is applied.

A ball-bearing swivel allows these hooks to rotate under load. Attach to chain by inserting the included pin through a link.

Use these on thick molds, castings, and objects that don't have attachment points. Also known as foundry hooks.

Often used in binding and tie-down applications, these securely hold a single link of chain.

Easily slip chain, rope, and fittings on and off these open-mouth hooks. Attach your chain to the eye end.

Attach chain to the eye end of these hooks.

For a more secure connection than standard trigger-locking snaps, squeeze the trigger and slide the latch grip down to release.

A wide opening accepts large diameters of rope and pipe. Squeeze the trigger to release.

Lock the bolt with wire or a cable tie for a secure connection.

Slide the lock down to open the latch and release it to lock these carabiners.

Hold rope more securely than nonlocking and slide-release carabiners. While these carabiners are not as secure as screw-locking carabiners, they are easier to open.

Use these to adjust the position of a fitting or an object under load and minimize twisting and knotting.

Minimize twisting and knotting of rope and chain and adjust the position of a fitting or an object under load.

Adjust the position of a fitting or an object under load and minimize twisting and knotting.

For easy positioning before a load is applied, these rotate to minimize twisting and knotting of rope and chain.

Rotating for easy positioning before a load is applied, these minimize twisting and knotting of rope and chain.

Join, organize, and suspend objects with these S-hooks.

These hooks have closed ends on both sides.

The spring-loaded latches on these hooks snap back into place, securing your load.

Use these S-hooks for lifting applications.

Use these links to connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

The fitting lets you connect the ends of chain to form a longer chain or create a loop for key chains and ID tags.

Also known as ball chain, use this chain to keep tools with machines, keys with chucks, and gas and dust caps with tanks.

Connect two lengths of chain to make longer chain barriers.