Press these feet into tubular legs of tables, chairs, and other furniture.

These feet have angled or rounded bottoms to work with tubular furniture legs that meet the floor at an angle.

Use these feet on furniture with wood legs.

Cover the bottom of furniture legs.

Peel back the film to stick these feet to the bottom of furniture and equipment legs.

These feet are made of UHMW polyethylene plastic, so they won’t dry out and become brittle.

Able to withstand temperatures up to 350° F, these have the highest maximum temperature of our plastic mounts.

A hex nut at the base of the stud allows for easy height adjustment.

Meant for light duty applications, these mounts are not rated for capacity.

Use these metric mounts on heavy machines and equipment.

Often used on wobbly tables, these mounts automatically adjust up to 5/16" to compensate for uneven floors.

A shield on the stud prevents dirt accumulation on the threads and provides a finished appearance.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made entirely of 316 stainless steel, these mounts have superior corrosion resistance.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Well-suited to damp environments, these mounts have a stainless steel stud and nut for corrosion resistance.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Well-suited to damp environments, these metric mounts have a stainless steel stud and nut for corrosion resistance.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Black-oxide steel has a dull shine for areas where appearance is a concern.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

All-stainless steel construction stands up to water and chemicals and won't rust or corrode.

Thread these mounts into machinery to level them on uneven floors in sanitary environments such as food-processing areas.

Bolt these mounts down to keep your equipment stationary.

Higher deflection ratings translate to greater vibration and shock isolation.

Rated for high load capacity, use these inserts to connect threaded leveling mounts to heavy equipment.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

These nonslip bumpers protect equipment while minimizing the movement of objects that come in contact, making them good for positioning and robotic-gripping applications. Install them with adhesives or screws.

Select these bumpers for applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist these bumpers into a threaded hole.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

Press these bumpers into place with the adhesive backing. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. They're comparable to Bumpon bumpers.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Precisely align, level, and adjust spacing on fasteners and shafts with these shims.

Also known as machinery bushings, these shims have an oversized OD to create a larger bearing surface for reduced wear between moving parts.

These shims are made of layers of metal bonded with adhesive. Remove layers with a utility knife until you get the thickness you need.

For a snug fit around a shaft, the ID of these shims is held to a tighter tolerance than other round shims.

Precisely shaped to fit snugly on keyed shafts, these shims align, level, and space components. Because of their tight fit, they also help components rotate in unison with the shaft.

Adjust spacing between bearings and other components on shafts. These shims are sized to fit the outer rim of a bearing.

Slide these shims under the screw head to shorten the shoulder length.

Use these round shims as they are, or punch out the middle to create the ID you need.

Keep shim stock in a variety of thicknesses on hand with these sets, which are color coded by thickness for easy identification. Cut them into custom shapes to fit your application.

A durable acrylic adhesive keeps this shim stock from sliding out of place. Cut it into custom shapes to fit your application.

This shim stock is color coded by thickness for easy identification. Cut it into custom shapes to fit your application.

Send us a drawing, and we'll cut your custom shim. Shims are made of layers of metal bonded with adhesive; remove layers with a utility knife until you get the thickness you need.