McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    8 Products

    Check Valves with Push-to-Connect Fittings for Harsh Chemicals

    Image of Product. Back orientation. Check Valves. Check Valves with Push-to-Connect Fittings for Harsh Chemicals.
    Connect your inlet tubing into the push-to-connect fittings—no heat, solder, or flux required. These valves have a PVDF body and a fluoroelastomer seal for excellent chemical resistance. They open to allow flow in one direction and close when flow stops or reverses.
    For Tube
    OD
    Pipe
    Size
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    For Use With
    Piston
    Material
    Spring
    Material
    Seal Material
    Each
    PVDF Body
     
    Push-to-Connect Inlet × NPTF Male Outlet
    3/8"1/4
    		300 psi @ 70° F0.50 to 250Black1 3/8"Air, Argon, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Helium, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Krypton, Mineral Spirits, Natural Gas, Neon, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, Toluene (Methylbenzene), Water, Xenon, XylenePVDF
    		Stainless Steel
    		Fluoroelastomer
    		2048N11000000
     

    Threaded Check Valves for Harsh Chemicals

    These valves open to allow flow in one direction and close when flow stops or reverses.
    PVDF Body—Spring-Loaded Ball
    Image of Product. Front orientation. Check Valves. Threaded Check Valves for Harsh Chemicals, PVDF Body—Spring-Loaded Ball.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting Position
    For Use With
    Ball Material
    Spring Material
    Seal Material
    Each
    NPT Male Inlet × NPT Male Outlet
    1/8 Not Rated220 psi @ 70° F2.540 to 180White1"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K21000000
    1/4 Not Rated220 psi @ 70° F2.540 to 180White1 7/16"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3100000
    3/8 Not Rated220 psi @ 70° F2.540 to 180White1 1/2"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3300000
    1/2 Not Rated220 psi @ 70° F2.540 to 180White1 13/16"Any Angle, Horizontal, VerticalAir, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide (Caustic Soda), Toluene (Methylbenzene), Water, Xylene316 Stainless Steel
    		316 Stainless Steel
    		Fluoroelastomer
    		46505K3500000
     

    Check Valves with Barbed Fittings for Harsh Chemicals

    Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
    PVDF Body—Diaphragm
    Image of Product. Front orientation. Diaphragm Check Valve. Check Valves with Barbed Fittings for Harsh Chemicals.
    PVDF valve resists abrasion and UV light.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Flow Coefficient
    (Cv)
    For Tube
    ID
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting
    Position
    For Use With
    Diaphragm
    Material
    Seal Material
    Each
    Barbed Male Inlet × Barbed Male Outlet
    Not Rated1/4" 15 psi @ 70° F0.5-20 to 250White1 21/32"HorizontalAir, Butane, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Gasoline, Hydrochloric Acid, Nitric Acid, Oil, Propane, Salt Water, Soap Solutions, Sodium Hypochlorite (Bleach), Sulfuric Acid, WaterFluoroelastomer
    		Fluoroelastomer
    		47245K3700000
     

    Flanged Check Valves for Harsh Chemicals

    Bolt these valves to ANSI flanges. The glass-filled vinyl ester body and PTFE seal stand up to a wide range of harsh chemicals. Valves open to allow flow in one direction and close when flow stops or reverses.
    Glass-Filled Vinyl Ester Body—Ball
    Image of Product. Front orientation. Check Valves. Flanged Check Valves for Harsh Chemicals.
    Flow Coefficient (Cv)—Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
    Pipe
    Size
    Flow Coefficient
    (Cv)
    Max. Pressure
    @ Temp.
    Min. Opening
    Pressure, psi
    Temp. Range,
    ° F
    Color
    End-to-End
    Lg.
    Mounting
    Position
    For Flange
    Class
    Flange
    OD
    No. of Bolt
    Holes
    Bolt Hole
    Size
    Bolt Circle
    Dia.
    Bolts
    Included
    Specs. Met
    For Use With
    Ball
    Material
    Seal
    Material
    Each
    Flanged × Flanged
    1 35200 psi @ 250° F1-40 to 250Beige5"Vertical150
    		4 1/4"45/8"3 1/8"NoASME B16.10, ASME B16.5Ammonia, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		1869N10000000
    254140 psi @ 250° F1-40 to 250Beige7"Vertical150
    		6"43/4"4 3/4"NoASME B16.10, ASME B16.5Ammonia, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol (Methyl Alcohol), Methyl Ethyl Ketone (MEK), Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene (Methylbenzene), Water, XylenePTFE
    		PTFE
    		1869N3000000
     
    back to top