About Backflow-Prevention Valves
More
Threaded Check Valves for Harsh Chemicals
These valves open to allow flow in one direction and close when flow stops or reverses.
Polypropylene valves are more corrosion resistant than PVC or CPVC valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- For Use With: Air, Ammonia, Butane, Carbon Dioxide, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Natural Gas, Nitric Acid, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Sodium Hydroxide, Toluene, Water, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 316 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | Each | |
NPT Male × NPT Male | ||||||||
---|---|---|---|---|---|---|---|---|
1/8 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1" | 00000000 | 000000 |
1/4 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 7/16" | 00000000 | 00000 |
3/8 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 1/2" | 00000000 | 00000 |
1/2 | Not Rated | 220 psi @ 70° F | 2.5 | 40° to 180° | White | 1 13/16" | 00000000 | 00000 |
Ultra-Chemical-Resistant Threaded Check Valves
- For Use With: Acetone, Ammonia, Butane, Carbon Dioxide, Citric Acid, Diesel Fuel, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Natural Gas, Nitric Acid, Nitrogen, Oil, Oxygen, Phosphoric Acid, Propane, Salt Water, Soap Solutions, Sodium Hydroxide, Sodium Hypochlorite, Sulfuric Acid, Toluene, Water, Xylene
- Piston Material: PTFE Plastic
- Spring Material: PTFE Plastic
The most chemical-resistant check valves in our offering, these have a PFA body to withstand methyl ethyl ketone, sodium hypochlorite, and other extremely harsh chemicals. They open to allow flow in one direction and close when flow stops or reverses.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | Each | |
PFA Plastic Body | ||||||||
---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | ||||||||
1/4 | 0.75 | 125 psi @ 150° F | 1 | 0° to 210° | Semi-Clear White | 2 3/8" | 00000000 | 0000000 |
1/2 | 4 | 100 psi @ 150° F | 1 | 0° to 210° | Semi-Clear White | 3 3/8" | 00000000 | 000000 |
NPT Female × NPT Male | ||||||||
1/4 | 0.75 | 125 psi @ 150° F | 1 | 0° to 210° | Semi-Clear White | 2 7/16" | 00000000 | 000000 |
NPT Male × NPT Female | ||||||||
1/4 | 0.75 | 125 psi @ 150° F | 1 | 0° to 210° | Semi-Clear White | 2 1/16" | 00000000 | 000000 |
NPT Male × NPT Male | ||||||||
1/4 | 0.75 | 125 psi @ 150° F | 1 | 0° to 210° | Semi-Clear White | 2 7/16" | 00000000 | 000000 |
Check Valves with Barbed Fittings for Harsh Chemicals
Prevent backflow in chemical tubing lines. These valves have barbed fittings that grip onto tubing, providing a secure hold. The plastic body and fluoroelastomer seal provide excellent chemical resistance. Valves open to allow flow in one direction and close when flow stops or reverses.
Polypropylene valves are more corrosion resistant than nylon valves.
Nylon valves are more impact resistant than polypropylene valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- For Use With: Acetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 302 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
- For Use With: Acetone, Air, Argon, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Helium, Kerosene, Krypton, Mineral Spirits, Neon, Nitrogen, Oil, Propane, Salt Water, Soap Solutions, Toluene, Water, Xenon, Xylene
- Ball Material: 316 Stainless Steel
- Spring Material: 302 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
Flanged Check Valves for Harsh Chemicals
- For Use With: Ammonia, Chlorine, Citric Acid, Deionized Water, Diesel Fuel, Ethanol, Ethylene Glycol, Fuel Oil, Gasoline, Hydrochloric Acid, Isopropyl Alcohol, Kerosene, Methanol, Methyl Ethyl Ketone, Mineral Spirits, Oil, Phosphoric Acid, Salt Water, Soap Solutions, Toluene, Water, Xylene
- Ball Material: PTFE Plastic
- Seal Material: PTFE Plastic
Bolt these valves to ANSI flanges. The glass-filled vinyl ester body and PTFE seal stand up to a wide range of harsh chemicals. Valves open to allow flow in one direction and close when flow stops or reverses.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | Color | End-to-End Lg. | For Flange Class | Flange OD | Number of Bolt Holes | Bolt Hole Size | Bolt Circle Dia. | Bolts Included | Each | |
Glass-Filled Vinyl Ester Body | ||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Flanged × Flanged | ||||||||||||||
1 | 35 | 200 psi @ 250 ° F | 1 | -40° to 250° | Beige | 5" | 150 | 4 1/4" | 4 | 5/8" | 3 1/8" | No | 000000 | 0000000 |
2 | 54 | 140 psi @ 250 ° F | 1 | -40° to 250° | Beige | 7" | 150 | 6" | 4 | 3/4" | 4 3/4" | No | 000000 | 000000 |
High-Temperature Threaded Check Valves for Oil and Fuel
- For Use With: Butane, Diesel Fuel, Fuel Oil, Natural Gas, Propane
- Piston Material: Brass
- Spring Material: 316 Stainless Steel
- Seal Material: Fluoroelastomer Rubber
For more than twice the temperature rating of standard check valves for oil and fuel, these have a heat-resistant fluoroelastomer seal that can withstand temperatures up to 500° F. They open to allow flow in one direction and close when flow stops or reverses.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | End-to-End Lg. | Each | |
Bronze Body | |||||||
---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
1/4 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 2 1/4" | 0000000 | 000000 |
3/8 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 2 1/4" | 0000000 | 00000 |
1/2 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 2 1/2" | 0000000 | 000000 |
3/4 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 2 3/4" | 0000000 | 000000 |
1 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 3 3/8" | 0000000 | 000000 |
1 1/4 | Not Rated | 300 psi @ 70° F | 2 | 50° to 500° | 3 3/4" | 0000000 | 000000 |
Flange-Mount Check Valves for Oil and Fuel
- For Use With: Butane, Diesel Fuel, Fuel Oil, Gasoline, Kerosene, Natural Gas, Oil, Propane
- Disc Material: 316 Stainless Steel
- Seal Material: 316 Stainless Steel
Install these valves between ANSI flanges. ANSI flanges are sold separately. All valves open to allow flow in one direction and close when flow stops or reverses. Body is 316 stainless steel for excellent corrosion resistance.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Min. Opening Pressure, psi | Temperature Range, °F | End-to-End Lg. | For Flange Class | Each | |
316 Stainless Steel Body | ||||||||
---|---|---|---|---|---|---|---|---|
Flanged × Flanged | ||||||||
2 | 48 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 2 3/8" | 150, 300, 600 | 0000000 | 0000000 |
2 1/2 | 90 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 2 5/8" | 150, 300, 600 | 0000000 | 000000 |
3 | 171 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 2 7/8" | 150, 300, 600 | 0000000 | 000000 |
4 | 291 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 2 7/8" | 150, 300 | 0000000 | 000000 |
6 | 705 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 3 7/8" | 150, 300 | 0000000 | 00000000 |
8 | 1,795 | 275 psi @ 70° F | 1.25 | -20° to 1000° | 5" | 150, 300 | 0000000 | 00000000 |